Users Guide

* current machine (which must be a subscriber in the *
* cluster) to the cluster publisher. Do not close the *
* shell or interrupt this command execution. *
********************************************************
Continue? [y|Y]: y
make-subscriber
Makes this node a subscriber to the specified publisher node.
Syntax
make-subscriber -i <IP Address> [-l]
Where:
Flag/Parameter Description
-i <IP Address>
Required.
Publisher IP address.
-l
Optional.
Restore the local log database after this operation.
Table 195: Make-Subscriber Commands
Example
[appadmin]# cluster make-subscriber –i 192.168.1.1 –p !alore -l
reset-database
Resets the local database and erases its configuration.
Syntax
cluster reset-database
Returns
[appadmin]# cluster reset-database
**********************************************************
* WARNING: Running this command will erase the Policy Manager *
* configuration and leave the database with default *
* configuration. You will lose all the configured data. *
* Do not close the shell or interrupt this command *
* execution. *
*********************************************************
Continue? [y|Y]: y
set-cluster-passwd
Changes the cluster password on all publisher nodes. Executed on the publisher; prompts for the new cluster
password.
Syntax
cluster set-cluster-passwd
Returns
[appadmin]# cluster set-cluster-passwd
cluster set-cluster-passwd
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide 321