White Papers

Dell Networking W-
Series ClearPass Configuration Guide
13
Dell Networking ClearPass Configuration
The following configuration steps start from a ClearPass appliance that has been setup according to the
basic configuration outlined in the Dell Networking W-ClearPass Policy Manager 6.0 Quick Start Guide.
It’s assumed that all Subscription IDs and licensing has been enabled for the product.
Adding Network Authenticator
Navigate to Configuration > Network > Devices
Click on Add Device in the upper right hand corner
Under the Device tab, input the following:
 Enter a descriptive name in the Name field
 Enter the IP address of the 7024P switch in the IP or Subnet Address field
 Enter the same secret used previously in the RADIUS Shared Secret field
 Enter the same secret again in the Verify field
 Choose IETF from the dropdown list in the Vendor Name field
 Click Save
Figure 5. MAC Authentication ClearPass - Adding Network Authenticator