White Papers

Dell Networking W-
Series ClearPass Configuration Guide
31
 Click the disk icon to save the condition
 Click on Save
Click on Next to move to the Summary tab
Click on Save to save the Enforcement policy and move back to the Service configuration
Figure 19. OnGuard ClearPass – Enforcement Policy
Clink on Next to move to the Summary tab
Click on Save to move to the Reorder Services page
ClearPass evaluates the Services created from the top of the list to the bottom. There are many
default services that come configured with the base install. These default services will not interfere
with this example. The Mac authorization service that was just created can be left at the bottom of
the service order list.
Click on Save to complete the Web-Auth configuration
Configuring a Wired 802.1x Policy
The next service to be configured is the standard 802.1x service. This service will authenticate the
device by request from the 7024P switch. Once the device passes authentication with the 7024P
switch, it will automatically step to the OnGuard health check service that was just configured above.
Navigate to Configuration > Start Here
Click on 802.1x Wired
Enter a descriptive name in the Name field
Enter a description in the Description field
Remove the 2
nd
service rule with the name Service-Type