White Papers

Dell Networking W-
Series ClearPass Configuration Guide
35
 From the dropdown menu under Profile Names, --Select to Add--, choose [RADIUS] [Allow
Access Profile]
 Click on Save
Click on Next to move to the Summary tab
Figure 23. Wired 802.1x ClearPass – Enforcement
Click on Save to move back to the service configuration
Click on Next to move to the Summary tab
Click on Save to move to the Reorder Services page
On the Reorder Services page, ensure this wired 802.1x service is placed before the OnGuard Web-
Auth service configured in the previous section
Click on Save to complete the configuration
Testing OnGuard Posture Configuration
The OnGuard persistent client application is downloaded directly from the ClearPass application. The
easiest method to access the .exe or .msi is to locate the download link within the management GUI.
ClearPass administrators can navigate to the following location:
Administration > Agents and Software Updates > OnGuard Settings
Ensure the Wired checkbox under Agent Customization, Managed Interfaces is checked
From the dropdown menu under Mode, choose Authenticate with health checks
Download the application, transfer it to the test PC, and install prior to trying to access the network.
Once OnGuard is installed, ensure the OnGuard process is started. Also ensure that the test PC can
support 802.1x on its LAN interface. (For Windows 7, administrators can start the Wired Auto Config
service by opening and locating it within services.msc on the Standard tab). Ensure the Local Area
Connection Authentication settings are properly configured. For this example Microsoft: Protected