Reference Guide

ManualsBrandsDell ManualsAccess PlatformsW-IAP104/105

Dell PowerConnect W-Series

Instant Access Point

6.2.0.0-3.2.0.0

MIB Reference Guide

Summary of content (100 pages)

PAGE 1
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.
PAGE 2
Copyright © 2013 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks®, Aruba Wireless Networks®, the registered Aruba the Mobile Edge Company logo, and Aruba Mobility Management System®. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA. All other trademarks are the property of their respective owners.
PAGE 3
Contents Preface....................................................................................................................................................................... 5 An Overview of This Manual ............................................................................................................ 5 Contents ............................................................................................................................................... 5 Related Documents...............
PAGE 4
| Contents Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
PAGE 5
Preface An Overview of This Manual This manual is for network administrators and operators responsible for managing the Dell PowerConnect W-Series Instant Access Point. Contents This guide provides information about MIBs. Unless otherwise stated in the following table, each chapter provides information about the hierarchy, OIDs, and descriptions of the statistical information the MIBs provide. Chapter Contents MIBs Overview Introductory information about Dell PowerConnect W-Instant MIBs.
PAGE 6
Table 1 Acronyms (Continued) 6 | Preface Acronym Definition CA Certificate Authority CAC Call Admission Control CHAP Challenge Handshake Authentication Protocol CLI Command Line Interface CRL Certificate Revocation List CSA Channel Switch Announcement CSR Certificate Signing Request CW Contention Window DA Destination Address DES Data Encryption Standard DHCP Dynamic Host Configuration Protocol DNS Domain Name Service DOS Denial of Service DPD Dead Peer Detection DSS Direct
PAGE 7
Table 1 Acronyms (Continued) Acronym Definition MAC Media Access Control MB Megabyte MCHAP Microsoft Challenge Handshake Authentication Protocol MIB Management Information Base NAS Network Address Server NAT Network Address Translation NIC Network Interface Card NTP Network Time Protocol OFDM Orthogonal Frequency Division Multiplexing OID Object Identifier OUI Organizational Unit Identifier PAP Password Authentication Protocol PEAP Protected EAP PEF Policy Enforcement Firewall
PAGE 8
Table 1 Acronyms (Continued) Acronym Definition VPN Virtual Private Network VRRP Virtual Router Redundancy Protocol VSA Vendor Specific Attributes WEP Wired Equivalent Protocol WINS Windows Internet Naming Service WLAN Wireless Local Area Network WMM Wireless MultiMedia / Wi-Fi Multimedia WMS WLAN Management System WPA Wi-Fi Protected Access Contacting Support Website Support 8 | Preface Main Website dell.com Support Website dell.com/support Dell Documentation dell.
PAGE 9
Chapter 1 MIBs Overview This chapter provides an overview of the Dell W-Instant Enterprise MIBs in the following sections:  MIBs  SNMP MIBs A Management Information Base (MIB) is a virtual database that contains information that is used for network management. Each managed device contains MIBs that define the properties of that device.
PAGE 10
Figure 1 illustrates the high-level hierarchy of the MIBs. This document only covers the enterprise MIBs, objects designed to specifically support Dell devices. Standard MIBs are not covered. Figure 1 High-Level MIB Hierarchy ISO (1) 1 ORG (3) 1.3 DOD (6) 1.3.6 Internet (1) 1.3.6.1 Directory (1) Management (2) Experimental (4) 1.3.6.1.1 1.3.6.1.2 1.3.6.1.3 Private (4) 1.3.6.1.4 Enterprises (1) 1.3.6.1.4.1 Aruba (14823) 1.3.6.1.4.1.
PAGE 11
 MIBs are used for communication between the Managers and the Agents. The OIDs of the MIBs enable the Managers and Agents to communicate specific data requests and data returns.  To ensure functionality with SNMP, MIB objects must be defined with the proper keywords, as shown in Table 3. Dell W-Instant Enterprise MIBs support SNMPv1, SNMPv2, and SNMPv3. Table 3 MIB Keywords Keyword Description Sequence The sequence of objects of the MIB.
PAGE 12
| MIBs Overview Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
PAGE 13
Chapter 2 Using MIBs This chapter provides information on and examples of using MIBs.  Downloading MIB Files  Monitoring WLAN Health  Reading MIB Files  SNMP File  HP OpenView Downloading MIB Files The most recent Dell MIB files are available for registered customers at: dell.com/support. For assistance to set up an account and access files, please contact customer service. See “Contacting Support” on page 8.
PAGE 14
Figure 3 shows how information may be obtained through a graphical user interface (GUI). The user interface and the available features vary by application. Figure 3 Graphical User Interface Reading MIB Files This section describes how to interpret the basic components of a MIB file. To determine the OIDs, viewing the file snmp.h may be necessary, which is described in “SNMP File” on page 17. For additional information about MIB files, see “MIBs” on page 9.
PAGE 15
Imports The Imports section lists the objects that are defined in external ASN.1 files and are used in the current MIB file.
PAGE 16
Identity Identity is the opening description of the MIB. The information includes contact information for the vendor and a general description of the MIB. aiMIB MODULE-DENTITY LAST-UPDATED "0804160206Z" ORGANIZATION "Aruba Wireless Networks" CONTACT-INFO "Postal: 1322 Crossman Avenue Sunnyvale, CA 94089 E-mail: dl-support@arubanetworks.com Phone: +1 408 227 4500" DESCRIPTION "This MIB is for managing Aruba Instant WLAN" REVISION "0804160206Z" DESCRIPTION "The initial revision.
PAGE 17
Entry aiAccessPointEntry OBJECT-TYPE SYNTAX AiAccessPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { aiAPMACAddress } ::= { aiAccessPointTable 1 } AiAccessPointEntry ::= SEQUENCE { aiAPMACAddress MacAddress, aiAPName DisplayString, aiAPIPAddress IpAddress, aiAPSerialNum DisplayString, aiAPModel OBJECT IDENTIFIER, aiAPModelName DisplayString, aiAPCPUUtilization Integer32, aiAPMemoryFree Integer32, aiAPUptime TimeTicks Closing Line Following is the closing line—the end of the MIBs
PAGE 18
| Using MIBs Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
PAGE 19
Chapter 3 Dell W-Instant MIB The chapter provides information about the Dell W-Instant MIB, as well as entities that are attempting to access the network. Figure 4 shows the architecture of the Dell W-Instant MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.dell). The Dell W-Instant MIB is listed in the file aruba-instant.my. For information about downloading Dell W-Instant MIB file, see “Downloading MIB Files” on page 13.
PAGE 20
The supported tables in the Dell W-Instant MIB are listed and summarized in Table 4. The objects of the supported tables are described in the following sections. The following table lists the supported tables in the Dell W-Instant MIB: Table 4 Supported Instant MIB Tables Group Description aiAccessPointTable Contains all the access points connected to the virtual controller. This table is indexed by the MAC Address of the W-IAP.
PAGE 21
aiAPMACAddress Syntax MacAddress (OCTET STRING). Hint: 1x: Max-Access read-only Status current Description MAC address of the Access Point. aiAPName Syntax DisplayString (SIZE(0..64)) Max-Access read-only Status current Description Name of the Access Point. aiAPIPAddress Syntax IpAddress Max-Access read-only Status current Description IP address of the Access Point. aiAPSerialNum Syntax DisplayString (SIZE(0..
PAGE 22
aiAPModelName Syntax DisplayString (SIZE(0..32)) Max-Access read-only Status current Description Model name of the Access Point. aiAPCPUUtilization Syntax Integer32 Max-Access read-only Status current Description CPU utilization of the Access Point. aiAPMemoryFree Syntax Integer32 Max-Access read-only Status current Description Amount of memory free in the access point in bytes.
PAGE 23
aiRadioTable The objects of the aiRadioTable provide information about all the radios and the related information of the Access Points. Table 6 aiRadioTable OIDs Object Object ID aiRadioEntry 1.3.6.1.4.1.14823.2.3.3.1.2.2.1 aiRadioTable 1 aiRadioAPMacAddress 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.1 aiRadioEntry 1 aiRadioIndex 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.2 aiRadioEntry 2 aiRadioMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.3 aiRadioEntry 3 aiRadioChannel 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.
PAGE 24
aiRadioAPMacAddress Syntax MacAddress (OCTET STRING). Hint: 1x: Max-Access read-only Status current Description MAC Address of the Access Point where this radio is active. aiRadioIndex Syntax Integer32 Max-Access read-only Status current Description Radio number of the Access Point. aiRadioMACAddress Syntax MacAddress Max-Access read-only Status current Description Radio MAC address of the Access Point.
PAGE 25
aiRadioNoiseFloor Syntax Integer32 Max-Access read-only Status current Description Radio noise of the Access Point in dBm. aiRadioUtilization4 Syntax Integer32 Max-Access read-only Status current Description Radio channel utilization 4 second average. aiRadioUtilization64 Syntax Integer32 Max-Access read-only Status current Description Radio channel utilization 64 second average.
PAGE 26
aiRadioTxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of data frames transmitted. aiRadioTxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of data bytes transmitted. aiRadioTxDrops Syntax Counter32 Max-Access read-only Status current Description Total number of frames dropped during transmission.
PAGE 27
aiRadioRxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of received data bytes. aiRadioRxMgmtFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received management frames. aiRadioRxBad Syntax Counter32 Max-Access read-only Status current Description Total number of frames received in error.
PAGE 28
aiWlanTable The objects of the aiWlanTable provide information about all the BSSIDs active on the virtual controller. Table 7 aiWlanTable OIDs Object Object ID aiWlanEntry 1.3.6.1.4.1.14823.2.3.3.1.2.3.1 aiWlanTable 1 aiWlanAPMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.1 aiWlanEntry 1 aiWlanIndex 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.2 aiWlanEntry 2 aiWlanESSID 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.3 aiWlanEntry 3 aiWlanMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.4 aiWlanEntry 4 aiWlanTxTotalFrames 1.
PAGE 29
aiWlanIndex Syntax Integer32 Max-Access read-only Status current Description Index of the WLAN. This is a unique index assigned to the active WLAN on the Access Point. aiWlanESSID Syntax DisplayString Max-Access read-only Status current Description ESSID of the WLAN aiWlanMACAddress Syntax MacAddress (OCTET STRING).
PAGE 30
aiWlanTxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of data bytes transmitted. aiWlanRxTotalFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received frames. aiWlanRxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received data frames.
PAGE 31
aiClientTable The objects of the aiWlanTable provide information about all the clients connected to the virtual controller. Table 8 aiClientTable OID Object Object ID aiClientTable Entry 1.3.6.1.4.1.14823.2.3.3.1.2.4.1 aiClientTable 1 aiClientMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.1 aiClientEntry 1 aiClientWlanMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.2 aiClientEntry 2 aiClientIPAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.3 aiClientEntry 3 aiClientAPIPAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.
PAGE 32
aiClientWlanMACAddress Syntax MacAddress Max-Access read-only Status current Description BSSID of WLAN where client is associated. aiClientIPAddress Syntax IpAddress Max-Access read-only Status current Description IP address of the client. aiClientAPIPAddress Syntax IpAddress Max-Access read-only Status current Description Radio channel. First byte contains primary channel and first two bits on second byte contains indicator for secondary channel.
PAGE 33
aiClientSNR Syntax Integer32 Max-Access read-only Status current Description Signal to noise ratio of the client connected to the Access Point aiClientTxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of frames transmitted by the client. aiClientTxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of bytes transmitted by the client.
PAGE 34
aiClientRxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of frames received by the client in mbps. aiClientRxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of bytes received by the client in mbps. aiClientRxRetries Syntax Counter32 Max-Access read-only Status current Description Total number of retry frames received by the client.
PAGE 35
Chapter 4 SNMP MIBs Reference This section provides lists of the SNMP MIB OIDs that are related to Dell PowerConnect W-Instant. The following table defines the sysObjectIds for Dell PowerConnect products. Table 9 SNMP OIDs returned as sysObjectID for Dell products SNMP MIB OID aiInfoGroup 1.3.6.1.4.1.14823.2.3.3.1.1 aiStateGroup 1.3.6.1.4.1.14823.2.3.3.1.2 aiVirtualControllerKey 1.3.6.1.4.1.14823.2.3.3.1.1.1.0 aiVirtualControllerName 1.3.6.1.4.1.14823.2.3.3.1.1.2.
PAGE 36
Table 9 SNMP OIDs returned as sysObjectID for Dell products (Continued) SNMP MIB OID aiRadioChannel 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.4 aiRadioTransmitPower 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.5 aiRadioNoiseFloor 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.6 aiRadioUtilization4 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.7 aiRadioUtilization64 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.8 aiRadioTxTotalFrames 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.9 aiRadioTxMgmtFrames 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.10 aiRadioTxDataFrames 1.3.6.1.4.1.
PAGE 37
Table 9 SNMP OIDs returned as sysObjectID for Dell products (Continued) SNMP MIB OID aiClientTxDataBytes 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.9 aiClientTxRetries 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.10 aiClientTxRate 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.11 aiClientRxDataFrames 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.12 aiClientRxDataBytes 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.13 aiClientRxRetries 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.14 aiClientRxRate 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.15 aiClientUptime 1.3.6.1.4.1.14823.2.3.3.
PAGE 38
| SNMP MIBs Reference Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
PAGE 39
Chapter 5 Traps This module defines the traps that can be generated by the W-IAP. Traps are MIB objects (variables) that transmit information to the SNMP Manager when an event occurs. Traps are included as varbinds (variable bindings) in the trap protocol data unit (PDU). Varbinds are defined in the Description section below. Figure 5 shows the architecture of the Traps MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.dell). The Traps are listed in the file aruba-trap.my MIB file.
PAGE 40
ai Traps Objects Group The following table lists the supported trap objects in this group: Table 10 aiTraps Objects Group OIDs 40 | Traps Object Object ID wlsxTrapAPMacAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.1 wlsxTrapObjectsGroup 1 wlsxTrapAPIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.2 wlsxTrapObjectsGroup 2 wlsxTrapAPBSSID 1.3.6.1.4.1.14823.2.3.3.1.200.1.3 wlsxTrapObjectsGroup 3 wlsxTrapEssid 1.3.6.1.4.1.14823.2.3.3.1.200.1.4 wlsxTrapObjectsGroup 4 wlsxTrapTargetAPBSSID 1.3.6.1.4.1.14823.
PAGE 41
Table 10 aiTraps Objects Group OIDs (Continued) Object Object ID wlsxTrapVoltageValue 1.3.6.1.4.1.14823.2.3.3.1.200.1.33 wlsxTrapObjectsGroup 33 wlsxTrapStationBlackListReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.34 wlsxTrapObjectsGroup 34 wlsxTrapSpoofedIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.35 wlsxTrapObjectsGroup 35 wlsxTrapSpoofedOldPhyAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.36 wlsxTrapObjectsGroup 36 wlsxTrapSpoofedNewPhyAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.
PAGE 42
Table 10 aiTraps Objects Group OIDs (Continued) 42 | Traps Object Object ID wlsxTrapUpdateFailureReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.67 wlsxTrapObjectsGroup 67 wlsxTrapUpdateFailedObj 1.3.6.1.4.1.14823.2.3.3.1.200.1.68 wlsxTrapObjectsGroup 68 wlsxTrapTableEntryChangeType 1.3.6.1.4.1.14823.2.3.3.1.200.1.69 wlsxTrapObjectsGroup 69 wlsxTrapGlobalConfigObj 1.3.6.1.4.1.14823.2.3.3.1.200.1.70 wlsxTrapObjectsGroup 70 wlsxTrapTableGenNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.
PAGE 43
Table 10 aiTraps Objects Group OIDs (Continued) Object Object ID wlsxTrapAPARMChangeReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.101 wlsxTrapObjectsGroup 101 wlsxTrapAPChannelSec 1.3.6.1.4.1.14823.2.3.3.1.200.1.102 wlsxTrapObjectsGroup 102 wlsxTrapUserAttributeChangeType 1.3.6.1.4.1.14823.2.3.3.1.200.1.103 wlsxTrapObjectsGroup 103 wlsxTrapAPControllerIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.104 wlsxTrapObjectsGroup 104 wlsxTrapApMasterStatus 1.3.6.1.4.1.14823.2.3.3.1.200.1.
PAGE 44
wlsxTrapEssid Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised. wlsxTrapTargetAPBSSID Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the BSSID of the access point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP.
PAGE 45
wlsxTrapSourceMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the source. wlsxReceiverMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the receiver.
PAGE 46
wlsxTrapFrameType Syntax ArubaFrameType Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the frame type. wlsxTrapAddressType Syntax ArubaAddressType Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the address type. wlsxTrapAPLocation Syntax DisplayString(Size(0..
PAGE 47
wlsxTrapMatchedIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the IP address. wlsxTrapRogueIfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBUI Rogue AP information URL. wlsxTrapVLANId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the VLAN ID.
PAGE 48
wlsxTrapAuthServerTimeout Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Authentication Server Timeout. wlsxTrapCardSlot Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the slot in which this card is present. wlsxTrapTemperatureValue Syntax DisplayString(Size(0..
PAGE 49
wlsxTrapVoltageValue Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the voltage value in float. wlsxTrapStationBlackListReason Syntax ArubaBlackListReason Max-Access accessible-for-notify Status current Description The reason for which a station is black listed.
PAGE 50
wlsxTrapDBUserName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the name of the database user. wlsxTrapDBIpAddress Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the IP address of the database.
PAGE 51
wlsxTrapESIServerGrpName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the External Services Interface (ESI) server group name. wlsxTrapESIServerName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the External Services Interface (ESI) server name.
PAGE 52
wlsxTrapUserIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP address of the user. wlsxTrapUserPhyAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object represents the MAC address of the user. wlsxTrapUserName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the user name.
PAGE 53
wlsxTrapRogueInfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBGUI Rogue AP information URL. wlsxTrapInterferingAPInfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBGUI Rogue interfering access point information URL.
PAGE 54
wlsxTrapConfigurationId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the ID of the configuration, to be used in traps. wlsxTrapCTSURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the URL from which the transfer should happen. wlsxTrapCTSTransferType Syntax DisplayString(Size(0..
PAGE 55
wlsxTrapTableEntryChangeType Syntax ArubaConfigurationChangeType (INTEGER) Max-Access accessible-for-notify Status current Description This object represents the type of the configuration change. wlsxTrapGlobalConfigObj Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This variable represents the AMAPI object corresponding to the global configuration change.
PAGE 56
wlsxVoiceCurrentNumCdr Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the number of CDRs in buffer. History Added in ArubaOS 3.1.0.0. wlsxTrapTunnelId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the tunnel ID. wlsxTrapTunnelStatus Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the tunnel status.
PAGE 57
wlsxTraptimeStr Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the Time in String format. wlsxTrapMasterIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the master IP address. wlsxTrapLocaIIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the local IP address. wlsxTrapMasterName Syntax DisplayString(Size(0..
PAGE 58
wlsxTrapBackupControllerIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP address of the AP's backup controller. wlsxTrapSpoofedFrameType Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Spoofed Frame Type wlsxTrapAssociationType Syntax DisplayString (SIZE(0..
PAGE 59
wlsxTrapVcMacAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object represents the MAC address of a Voice client. wlsxTrapAPName Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Name of the AP. wlsxTrapApMode Syntax Integer32 Max-Access accessible-for-notify Status current Description This Object represents the AP Mode.
PAGE 60
wlsxTrapAPCurMode Syntax ArubaAccessPointMode (INTEGER) Max-Access accessible-for-notify Status current Description This Object represents the APs Current Mode. wlsxTrapAPPrevMode Syntax ArubaAccessPointMode (INTEGER) Max-Access accessible-for-notify Status current Description This Object represents the APs Previous Mode.
PAGE 61
wlsxTrapApMasterStatus Syntax ArubaAPMasterStatus (INTEGER) Max-Access accessible-for-notify Status current Description Status of the AP as seen by the master when the status changes. wlsxTrapCaName Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the name of the trustpoint. wlsxTrapCrlName Syntax DisplayString (SIZE(0..
PAGE 62
wlsxTrapAPActiveUplinkType Syntax ArubaAPUplinkType Max-Access accessible-for-notify Status current Description This object represents the active uplink type of an AP. wlsxTrapAPUplinkChangeReason 62 | Traps Syntax ArubaAPUplinkChangeReason Max-Access accessible-for-notify Status current Description This object represents the uplink change reason.
PAGE 63
ai Traps Definitions Group Table 11 ai Traps Definitions Group OIDs Object Object ID wlsxNUserEntryCreated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1014 wlsxTrapDefinitionsGroup 1014 wlsxNUserEntryDeleted 1.3.6.1.4.1.14823.2.3.3.1.200.2.1015 wlsxTrapDefinitionsGroup 1015 wlsxNUserEntryAuthenticated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1016 wlsxTrapDefinitionsGroup 1016 wlsxNUserEntryDeAuthenticated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1017 wlsxTrapDefinitionsGroup 1017 wlsxNUserAuthenticationFailed 1.3.6.1.4.1.
PAGE 64
Table 11 ai Traps Definitions Group OIDs (Continued) 64 | Traps Object Object ID wlsxOUIMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1059 wlsxTrapDefinitionsGroup 1059 wlsxSSIDMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1060 wlsxTrapDefinitionsGroup 1060 wlsxShortPreableMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1061 wlsxTrapDefinitionsGroup 1061 wlsxWPAMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1062 wlsxTrapDefinitionsGroup 1062 wlsxAdhocNetworkDetected 1.3.6.1.4.1.
PAGE 65
Table 11 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxLoadbalancingEnabled 1.3.6.1.4.1.14823.2.3.3.1.200.2.1080 wlsxTrapDefinitionsGroup 1080 wlsxLoadbalancingDisabled 1.3.6.1.4.1.14823.2.3.3.1.200.2.1081 wlsxTrapDefinitionsGroup 1081 wlsxChannelFrameRetryRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1082 wlsxTrapDefinitionsGroup 1082 wlsxChannelFrameFragmentationRateEx 1.3.6.1.4.1.14823.2.3.3.1.200.2.
PAGE 66
Table 11 ai Traps Definitions Group OIDs (Continued) 66 | Traps Object Object ID wlsxWEPMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1100 wlsxTrapDefinitionsGroup 1100 wlsxStaRepeatWEPIVViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1101 wlsxTrapDefinitionsGroup 1101 wlsxStaWeakWEPIVViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1102 wlsxTrapDefinitionsGroup 1102 wlsxStaAssociatedToUnsecureAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1103 wlsxTrapDefinitionsGroup 1103 wlsxStaUnAssociatedFromUnsecureAP 1.3.
PAGE 67
Table 11 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxSignStaDeauthBcast 1.3.6.1.4.1.14823.2.3.3.1.200.2.1143 wlsxTrapDefinitionsGroup 1143 wlsxWindowsBridgeDetectedAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1144 wlsxTrapDefinitionsGroup 1144 wlsxWindowsBridgeDetectedSta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1145 wlsxTrapDefinitionsGroup 1145 wlsxAdhocNetworkBridgeDetectedAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1146 wlsxTrapDefinitionsGroup 1146 wlsxAdhocNetworkBridgeDetectedSta 1.3.6.1.4.1.
PAGE 68
Table 11 ai Traps Definitions Group OIDs (Continued) 68 | Traps Object Object ID wlsxNStaUnAssociatedFromUnsecureA P 1.3.6.1.4.1.14823.2.3.3.1.200.2.1176 wlsxTrapDefinitionsGroup 1176 wlsxOmertaAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1177 wlsxTrapDefinitionsGroup 1177 wlsxTKIPReplayAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1178 wlsxTrapDefinitionsGroup 1178 wlsxChopChopAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1179 wlsxTrapDefinitionsGroup 1179 wlsxFataJackAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.
PAGE 69
Table 11 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxNSuspectRogueAPResolved 1.3.6.1.4.1.14823.2.3.3.1.200.2.1197 wlsxTrapDefinitionsGroup 1197 wlsxBlockAckAttackDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1198 wlsxTrapDefinitionsGroup 1198 wlsxHotspotterAttackDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1199 wlsxTrapDefinitionsGroup 1199 wlsxNSignatureMatch 1.3.6.1.4.1.14823.2.3.3.1.200.2.1200 wlsxTrapDefinitionsGroup 1200 wlsxNSignatureMatchNetstumbler 1.3.6.1.4.1.14823.2.3.3.
PAGE 70
Table 11 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxUserEntryAttributesChanged 1.3.6.1.4.1.14823.2.3.3.1.200.2.1219 wlsxTrapDefinitionsGroup 1219 wlsxPowerSaveDosAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1220 wlsxTrapDefinitionsGroup 1220 wlsxNAPMasterStatusChange 1.3.6.1.4.1.14823.2.3.3.1.200.2.1221 wlsxTrapDefinitionsGroup 1221 wlsxNAdhocUsingValidSSID 1.3.6.1.4.1.14823.2.3.3.1.200.2.1222 wlsxTrapDefinitionsGroup 1222 wlsxMgmtUserAuthenticationFailed 1.3.6.1.4.1.14823.2.
PAGE 71
wlsxNAuthServerReqTimedOut Objects wlsxTrapTime, wlsxTrapAuthServerName Status current Description This trap indicates that the authentication server request timed out. wlsxNAuthServerTimedOut Objects wlsxTrapTime, wlsxTrapAuthServerName, wlsxTrapAuthServerTimeout Status current Description This trap indicates that the authentication server timed out.
PAGE 72
wlsxNStationRemovedFromBlackList Objects wlsxTrapTime, wlsxTrapNodeMac Status current Description This trap indicates that the station is removed from the black list. the frame type. wlsxNRadioAttributesChanged Objects { wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPIpAddress, wlsxTrapAPChannel, wlsxTrapAPTxPower } Status current Description A Trap which indicates changes in the Radio attributes of an access point.
PAGE 73
wlsxValidSSIDViolation Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP has detected an access point is violating Valid SSID configuration by using an SSID that is reserved for use by a valid AP only.
PAGE 74
wlsxAdhocNetworkDetected Objects {wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM has detected an Ad hocnetwork.
PAGE 75
wlsxChannelInterferenceCleared Objects {wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that a previously detected channel interference is no longer present.
PAGE 76
wlsxFrameReceiveErrorRateExceeded Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapTargetAPChannel, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Receive Error Rate.
PAGE 77
wlsxLoadbalancingEnabled Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM is reporting that an AP has enabled Load balancing.
PAGE 78
wlsxSignatureMatchSta Objects { wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected a signature match in a frame from a Station.
PAGE 79
wlsxEAPRateAnomaly Objects { wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that the rate of EAP Handshake packets received by an AP has exceeded the configured IDS EAP Handshake rate threshold. For more info check:http://www.wve.
PAGE 80
wlsxDisconnectStationAttack Objects { wlsxTrapTime, wlsxTrapFrameType, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AM detected a station Disconnect attack. For more info check:http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046http://www.wve.
PAGE 81
wlsxInvalidMacOUISta Objects { wlsxTrapTime, wlsxTrapAddressType, wlsxTrapNodeMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected an invalid MAC OUI in the SRC or DST address of a frame. An invalid MAC OUI suggests that the frame may be spoofed.
PAGE 82
wlsxAdhocNetworkBridgeDetected Objects { wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM has detected an Ad hocnetwork that is bridging to a wired network.
PAGE 83
wlsxWindowsBridgeDetected Objects { wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM has detected a station that is bridging from a wireless network to a wired network.
PAGE 84
wlsxSignAPAirjack Objects { wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected a signature match for AirJack from an access point.For more info check:http://www.wve.
PAGE 85
wlsxSignStaDeauthBcast Objects { wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected a signature match for Deauth-Broadcast from a Station.For more info check:http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.
PAGE 86
wlsxDisconnectStationAttackAP Objects wlsxTrapTime, wlsxTrapFrameType, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AM detected a station Disconnect attack. For more info check:http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.
PAGE 87
wlsxHT40MHzIntoleranceSta Objects { wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapSnr, wlsxTrapAPChannel,wlsxTrapFrameType, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that the system is detecting an HT 40MHz Intolerance setting from a Station. For more info check:http://www.wve.
PAGE 88
wlsxValidClientNotUsingEncryption Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapNodeMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected an unencrypted data frame between a valid client and an access point.
PAGE 89
wlsxNDisconnectStationAttack Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP has determined that a client is under Disconnect Attack because the rate of Assoc/Reassoc Response packets received by that client exceeds the configured threshold. For more info check:http://www.wve.
PAGE 90
wlsxFataJackAttack Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapNodeMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a FATA-Jack attack. For more info check:http://www.wve.
PAGE 91
wlsxOverflowIEDetected Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapTargetAPBSSID, wlsxTrapAPChannel, wlsxTrapSnr Status current Description This trap indicates that an AP detected a management frame with a malformed information element. The declared length of the element is larger than the entire frame containing the element. This may be used to corrupt or crash wireless drivers. For more info check:http://www.
PAGE 92
wlsxCTSRateAnomaly Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that the rate of CTS packets received by an AP exceeds the configured IDS threshold..
PAGE 93
wlsxNSuspectRogueAPDetected Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPChannel, wlsxTrapConfidenceLevel Status current Description This trap indicates that an access point, classified as Suspected Rogue, is detected by the system. The AP is suspected to be rogue with the supplied confidence level.
PAGE 94
wlsxNSignatureMatchNetstumbler Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a signature match for Netstumbler in a frame. For more info check:http://www.wve.
PAGE 95
wlsxNSignatureMatchDisassocBcast Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a signature match for Disassoc-Broadcast in a frame. For more info check:http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.
PAGE 96
wlsxClientWiredContainment Objects wlsxTrapTime, wlsxTrapNodeMac, wlsxTrapTargetAPBSSID, wlsxTrapDeviceIpAddress, wlsxTrapDeviceMac, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface.
PAGE 97
wlsxAPPowerChange Objects wlsxTrapTime, wlsxTrapAPTxPower, wlsxTrapAPPrevTxPower, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP changed its transmit power level. wlsxAPModeChange Objects wlsxTrapTime, wlsxTrapAPCurMode, wlsxTrapAPPrevMode, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP changed its mode from AP to APMonitor or vice versa.
PAGE 98
wlsxMgmtUserAuthenticationFailed 98 | Traps Objects wlsxTrapTime, wlsxTrapUserName, wlsxTrapUserIpAddress, wlsxTrapAuthServerName Status current Description This trap indicates that a management user authentication has failed.
PAGE 99
Index A S Agents 10 Sequence 11 Status 11 Syntax 11 D Description 11 E Entry 16 G group 16 H T Traps MIB hierarchy 39 X xTrapLocaIIp 57 History ArubaOS 3.
PAGE 100
| Index Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide