Dell PowerConnect W-Series Instant Access Point MIB Reference Guide
Copyright © 2012 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks®, Aruba Wireless Networks®, the registered Aruba the Mobile Edge Company logo, and Aruba Mobility Management System®. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA. All other trademarks are the property of their respective owners.
Contents Preface.....................................................................................................................................................................15 An Overview of This Manual .......................................................................................................... 15 Contents ............................................................................................................................................. 15 Related Documents...................
aiRadioNoiseFloor .................................................................................................................... 35 aiRadioUtilization4.................................................................................................................... 35 aiRadioUtilization64.................................................................................................................. 35 aiRadioTxTotalFrames ............................................................................
wlsxTrapNodeMac................................................................................................................... 52 wlsxTrapSourceMac ............................................................................................................... 53 wlsxReceiverMac..................................................................................................................... 53 wlsxTrapTransmitterMac.......................................................................................
wlsxTrapConfigurationState................................................................................................... 62 wlsxTrapUpdateFailureReason.............................................................................................. 62 wlsxTrapUpdateFailedObj....................................................................................................... 62 wlsxTrapTableEntryChangeType...........................................................................................
wlsxNRadioAttributesChanged.............................................................................................. 79 wlsxUnsecureAPDetected ..................................................................................................... 79 wlsxUnsecureAPResolved...................................................................................................... 79 wlsxStaImpersonation.............................................................................................................
wlsxNAuthServerIsDown........................................................................................................ 89 wlsxWindowsBridgeDetected ............................................................................................... 90 wlsxSignAPNetstumbler ......................................................................................................... 90 wlsxSignStaNetstumbler ........................................................................................................
wlsxNSignatureMatchNullProbeResp ............................................................................... 101 wlsxNSignatureMatchDeauthBcast ................................................................................... 101 wlsxNSignatureMatchDisassocBcast ............................................................................... 102 wlsxNSignatureMatchWellenreiter .................................................................................... 102 wlsxAPDeauthContainment...............
| Contents Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
Figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 High-Level MIB Hierarchy .............................................................................................................. 20 CLI Interface...................................................................................................................................... 23 Graphical User Interface................................................................................................................. 24 Instant MIB Hierarchy ....
| Figures Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
Tables Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8 Table 9 Table 10 Table 11 Table 12 Table 13 Frequently Used Acronyms............................................................................................................. 15 Website Support............................................................................................................................... 18 MIB Node Identification - Enterprise Nodes .....................................................................
| Tables Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
Preface An Overview of This Manual This manual is for network administrators and operators responsible for managing the Dell PowerConnect W-Series Instant Access Points. Contents This guide provides information about Dell PowerConnect Instant MIBs. Unless otherwise stated in the following table, each chapter provides information about the hierarchy, OIDs, and descriptions of the statistical information the MIBs provide. Chapter Contents MIBs Overview Introductory information about Dell Instant MIBs.
Table 1 Frequently Used Acronyms (Continued) 16 | Preface Acronym Definition CAC Call Admission Control CHAP Challenge Handshake Authentication Protocol CLI Command Line Interface CRL Certificate Revocation List CSA Channel Switch Announcement CSR Certificate Signing Request CW Contention Window DA Destination Address DES Data Encryption Standard DHCP Dynamic Host Configuration Protocol DNS Domain Name Service DOS Denial of Service DPD Dead Peer Detection DSS Direct Spread Spe
Table 1 Frequently Used Acronyms (Continued) Acronym Definition MB Megabyte MCHAP Microsoft Challenge Handshake Authentication Protocol MIB Management Information Base NAS Network Address Server NAT Network Address Translation NIC Network Interface Card NTP Network Time Protocol OFDM Orthogonal Frequency Division Multiplexing OID Object Identifier OUI Organizational Unit Identifier PAP Password Authentication Protocol PEAP Protected EAP PEF Policy Enforcement Firewall PIN Person
Table 1 Frequently Used Acronyms (Continued) Acronym Definition VRRP Virtual Router Redundancy Protocol VSA Vendor Specific Attributes WEP Wired Equivalent Protocol WINS Windows Internet Naming Service WLAN Wireless Local Area Network WMM Wireless MultiMedia / Wi-Fi Multimedia WMS WLAN Management System WPA Wi-Fi Protected Access Website Contact Table 2 Website Support Web Site Support 18 | Preface Main Website dell.com Support Website support.dell.com Documentation Website support.
Chapter 1 MIBs Overview This chapter provides an overview of the ArubaOS Enterprise MIBs in the following sections: MIBs SNMP MIBs A Management Information Base (MIB) is a virtual database that contains information that is used for network management. Each managed device contains MIBs that define the properties of that device.
Figure 1 illustrates the high-level hierarchy of the MIBs. This document only covers the enterprise MIBs, objects designed to specifically support Dell devices. Standard MIBs are not covered. Figure 1 High-Level MIB Hierarchy MIB is one of the elements of Simple Network Management Protocol (SNMP), which is used to manage network devices. To deliver information between devices, every object referred to in an SNMP message must be listed in the MIB.
SNMP Three significant elements of SNMP are Managers, Agents, and MIBs. Managers (software application) are consoles that are used to communicate with and manage devices that support SNMP Agents. Managers collect information by polling Agents. Managers can also be used to send configuration updates or send controlling requests to actively manage a network device. Agents (software application) provide information from the network devices to the Managers.
| MIBs Overview Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
Chapter 2 Using MIBs This chapter provides information on and examples of using MIBs. Downloading MIB Files Monitoring WLAN Health Reading MIB Files SNMP File HP OpenView Downloading MIB Files The most recent Dell MIB files are available for registered customers at: support.dell.com For assistance to set up an account and access files, please contact customer service. See “Website Contact” on page 18.
Figure 3 shows how information may be obtained through a graphical user interface ( GUI). The user interface and the available features vary by application. Figure 3 Graphical User Interface Reading MIB Files This section describes how to interpret the basic components of a MIB file. To determine the OIDs, viewing the file snmp.h may be necessary, which is described in “SNMP File” on page 27. For additional information about MIB files, see “MIBs” on page 19.
Imports The Imports section lists the objects that are defined in external ASN.1 files and are used in the current MIB file.
Identity Identity is the opening description of the MIB. The information includes contact information for the vendor and a general description of the MIB. aiMIB MODULE-DENTITY LAST-UPDATED "0804160206Z" ORGANIZATION "Aruba Wireless Networks" CONTACT-INFO "Postal: 1322 Crossman Avenue Sunnyvale, CA 94089 E-mail: dl-support@arubanetworks.com Phone: +1 408 227 4500" DESCRIPTION "This MIB is for managing Aruba Instant WLAN" REVISION "0804160206Z" DESCRIPTION "The initial revision.
Entry aiAccessPointEntry OBJECT-TYPE SYNTAX AiAccessPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { aiAPMACAddress } ::= { aiAccessPointTable 1 } AiAccessPointEntry ::= SEQUENCE { aiAPMACAddress MacAddress, aiAPName DisplayString, aiAPIPAddress IpAddress, aiAPSerialNum DisplayString, aiAPModel OBJECT IDENTIFIER, aiAPModelName DisplayString, aiAPCPUUtilization Integer32, aiAPMemoryFree Integer32, aiAPUptime TimeTicks Closing Line Following is the closing line—the end of the MIBs
| Using MIBs Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
Chapter 3 Instant MIB The chapter provides information about the Dell Instant MIB, as well as entities that are attempting to access the network. Figure 4 shows the architecture of the Dell Instant MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.dell). The Instant MIB is listed in the file aruba-instant.my. For information about downloading Dell Instant MIB file, see “Downloading MIB Files” on page 23.
The following table lists the supported tables in the Instant MIB: Table 5 Supported Instant MIB Tables Group Description aiAccessPointTable Contains all the access points connected to the virtual controller. This table is indexed by the MAC Address of the IAP. aiRadioTable Contains all the radios of the access points connected to the virtual controller.This table is indexed by the MAC Address and radio number. aiWlanTable Contains all the BSSIDs that are active on the virtual controller.
aiAPMACAddress Syntax MacAddress Max-Access read-only Status current Description MAC address of the Access Point. aiAPName Syntax DisplayString (SIZE(0..64)) Max-Access read-only Status current Description Name of the Access Point. aiAPIPAddress Syntax IpAddress Max-Access read-only Status current Description IP address of the Access Point. aiAPSerialNum Syntax DisplayString (SIZE(0..64)) Max-Access read-only Status current Description Serial number of the Access Point.
aiAPModelName Syntax DisplayString (SIZE(0..32)) Max-Access read-only Status current Description Model name of the Access Point. aiAPCPUUtilization Syntax Integer32 Max-Access read-only Status current Description CPU utilization of the Access Point. aiAPMemoryFree Syntax Integer32 Max-Access read-only Status current Description Amount of memory free in the access point in bytes.
aiRadioTable The objects of the aiRadioTable provide information about all the radios and the related information of the Access Points. Table 7 aiRadioTable OIDs Object Object ID aiRadioEntry 1.3.6.1.4.1.14823.2.3.3.1.2.2.1 aiRadioTable 1 aiRadioAPMacAddress 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.1 aiRadioEntry 1 aiRadioIndex 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.2 aiRadioEntry 2 aiRadioMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.3 aiRadioEntry 3 aiRadioChannel 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.
aiRadioAPMacAddress Syntax MacAddress Max-Access read-only Status current Description MAC Address of the Access Point where this radio is active. aiRadioIndex Syntax Integer32 Max-Access read-only Status current Description Radio number of the Access Point. aiRadioMACAddress Syntax MacAddress Max-Access read-only Status current Description Radio MAC address of the Access Point.
aiRadioNoiseFloor Syntax Integer32 Max-Access read-only Status current Description Radio noise of the Access Point in dBm. aiRadioUtilization4 Syntax Integer32 Max-Access read-only Status current Description Radio channel utilization 4 second average. aiRadioUtilization64 Syntax Integer32 Max-Access read-only Status current Description Radio channel utilization 64 second average.
aiRadioTxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of data frames transmitted. aiRadioTxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of data bytes transmitted. aiRadioTxDrops Syntax Counter32 Max-Access read-only Status current Description Total number of frames dropped during transmission.
aiRadioRxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of received data bytes. aiRadioRxMgmtFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received management frames. aiRadioRxBad Syntax Counter32 Max-Access read-only Status current Description Total number of frames received in error.
aiWlanTable The objects of the aiWlanTable provide information about all the BSSIDs active on the virtual controller. Table 8 aiWlanTable OIDs Object Object ID aiWlanEntry 1.3.6.1.4.1.14823.2.3.3.1.2.3.1 aiWlanTable 1 aiWlanAPMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.1 aiWlanEntry 1 aiWlanIndex 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.2 aiWlanEntry 2 aiWlanESSID 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.3 aiWlanEntry 3 aiWlanMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.4 aiWlanEntry 4 aiWlanTxTotalFrames 1.
aiWlanIndex Syntax Integer32 Max-Access read-only Status current Description Index of the WLAN. This is a unique index assigned to the active WLAN on the Access Point.
aiWlanTxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of data bytes transmitted. aiWlanRxTotalFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received frames. aiWlanRxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received data frames.
aiClientTable The objects of the aiWlanTable provide information about all the clients connected to the virtual controller. Table 9 aiClientTable OID Object Object ID aiClientTable Entry 1.3.6.1.4.1.14823.2.3.3.1.2.4.1 aiClientTable 1 aiClientMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.1 aiClientEntry 1 aiClientWlanMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.2 aiClientEntry 2 aiClientIPAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.3 aiClientEntry 3 aiClientAPIPAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.
aiClientWlanMACAddress Syntax MacAddress Max-Access read-only Status current Description BSSID of WLAN where client is associated. aiClientIPAddress Syntax IpAddress Max-Access read-only Status current Description IP address of the client. aiClientAPIPAddress Syntax IpAddress Max-Access read-only Status current Description IP Address of the associated Access Point.
aiClientSNR Syntax Integer32 Max-Access read-only Status current Description Signal to noise ratio of the client connected to the Access Point aiClientTxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of frames transmitted by the client. aiClientTxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of bytes transmitted by the client.
aiClientRxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of frames received by the client in mbps. aiClientRxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of bytes received by the client in mbps. aiClientRxRetries Syntax Counter32 Max-Access read-only Status current Description Total number of retry frames received by the client.
Chapter 4 SNMP MIBs Reference Table 10 SNMP OIDs returned as sysObjectID for Dell Networks products SNMP MIB OID Dell .1.3.6.1.4.1.674 PowerConnect products .1.3.6.1.4.1.674.10895 Dell PowerConnect W-650 Controller .1.3.6.1.4.1.674.10895.5001 Dell PowerConnect W-651 Controller .1.3.6.1.4.1.674.10895.5002 Dell PowerConnect W-3200 Controller .1.3.6.1.4.1.674.10895.5003 Dell PowerConnect W-3400 Controller .1.3.6.1.4.1.674.10895.5004 Dell PowerConnect W-3600 Controller .1.3.6.1.4.1.674.10895.
Table 11 SNMP OIDs returned as sysObjectID for Dell PowerConnect W-Series Instant Access products (Continued) SNMP MIB OID Dell PowerConnect W-AP92 Access Point .1.3.6.1.4.1.674.10895.5006 Dell PowerConnect W-AP93 Access Point .1.3.6.1.4.1.674.10895.5007 Dell PowerConnect W-AP105 Access Point .1.3.6.1.4.1.674.10895.5008 Dell PowerConnect W-AP124 Access Point .1.3.6.1.4.1.674.10895.5009 Dell PowerConnect W-AP125 Access Point .1.3.6.1.4.1.674.10895.5010 Dell PowerConnect W-RAP5 Access Point .1.3.
Chapter 5 Traps This module defines the traps that can be generated by the IAP. Traps are MIB objects (variables) that transmit information to the SNMP Manager when an event occurs. Traps are included as varbinds (variable bindings) in the trap protocol data unit (PDU). Varbinds are defined in the Description section below. Figure 5 shows the architecture of the Traps MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.dell). The Traps are listed in the file aruba-trap.my MIB file.
ai Traps Objects Group The following table lists the supported trap objects in this group: Table 12 aiTraps Objects Group OIDs 48 | Traps Object Object ID wlsxTrapAPMacAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.1 wlsxTrapObjectsGroup 1 wlsxTrapAPIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.2 wlsxTrapObjectsGroup 2 wlsxTrapAPBSSID 1.3.6.1.4.1.14823.2.3.3.1.200.1.3 wlsxTrapObjectsGroup 3 wlsxTrapEssid 1.3.6.1.4.1.14823.2.3.3.1.200.1.4 wlsxTrapObjectsGroup 4 wlsxTrapTargetAPBSSID 1.3.6.1.4.1.14823.
Table 12 aiTraps Objects Group OIDs (Continued) Object Object ID wlsxTrapVoltageValue 1.3.6.1.4.1.14823.2.3.3.1.200.1.33 wlsxTrapObjectsGroup 33 wlsxTrapStationBlackListReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.34 wlsxTrapObjectsGroup 34 wlsxTrapSpoofedIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.35 wlsxTrapObjectsGroup 35 wlsxTrapSpoofedOldPhyAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.36 wlsxTrapObjectsGroup 36 wlsxTrapSpoofedNewPhyAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.
Table 12 aiTraps Objects Group OIDs (Continued) 50 | Traps Object Object ID wlsxTrapUpdateFailureReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.66 wlsxTrapObjectsGroup 67 wlsxTrapUpdateFailedObj 1.3.6.1.4.1.14823.2.3.3.1.200.1.67 wlsxTrapObjectsGroup 68 wlsxTrapTableEntryChangeType 1.3.6.1.4.1.14823.2.3.3.1.200.1.68 wlsxTrapObjectsGroup 69 wlsxTrapGlobalConfigObj 1.3.6.1.4.1.14823.2.3.3.1.200.1.69 wlsxTrapObjectsGroup 70 wlsxTrapTableGenNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.
Table 12 aiTraps Objects Group OIDs (Continued) Object Object ID wlsxTrapAPARMChangeReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.101 wlsxTrapObjectsGroup 101 wlsxTrapAPChannelSec 1.3.6.1.4.1.14823.2.3.3.1.200.1.102 wlsxTrapObjectsGroup 102 wlsxTrapUserAttributeChangeType 1.3.6.1.4.1.14823.2.3.3.1.200.1.103 wlsxTrapObjectsGroup 103 wlsxTrapAPControllerIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.104 wlsxTrapObjectsGroup 104 wlsxTrapApMasterStatus 1.3.6.1.4.1.14823.2.3.3.1.200.1.
wlsxTrapEssid Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised. wlsxTrapTargetAPBSSID Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the BSSID of the access point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP.
wlsxTrapSourceMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the source. wlsxReceiverMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the receiver.
wlsxTrapFrameType Syntax ArubaFrameType Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the frame type. wlsxTrapAddressType Syntax ArubaAddressType Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the address type. wlsxTrapAPLocation Syntax DisplayString(Size(0..
wlsxTrapMatchedIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the IP address. wlsxTrapRogueIfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBUI Rogue AP information URL. wlsxTrapVLANId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the VLAN ID.
wlsxTrapAuthServerTimeout Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Authentication Server Timeout. wlsxTrapCardSlot Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the slot in which this card is present. wlsxTrapTemperatureValue Syntax DisplayString(Size(0..
wlsxTrapVoltageValue Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the voltage value in float. wlsxTrapStationBlackListReason Syntax ArubaBlackListReason Max-Access accessible-for-notify Status current Description The reason for which a station is black listed.
wlsxTrapDBUserName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the name of the database user. wlsxTrapDBIpAddress Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the IP address of the database.
wlsxTrapESIServerGrpName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the External Services Interface (ESI) server group name. wlsxTrapESIServerName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the External Services Interface (ESI) server name.
wlsxTrapUserIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP address of the user. wlsxTrapUserPhyAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object represents the MAC address of the user. wlsxTrapUserName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the user name.
wlsxTrapRogueInfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBGUI Rogue AP information URL. wlsxTrapInterferingAPInfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBGUI Rogue interfering access point information URL.
wlsxTrapConfigurationId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the ID of the configuration, to be used in traps. wlsxTrapCTSURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the URL from which the transfer should happen. wlsxTrapCTSTransferType Syntax DisplayString(Size(0..
wlsxTrapTableEntryChangeType Syntax INTEGER {create(1),delete(2), modify(3)} Max-Access accessible-for-notify Status current Description This object represents the type of the configuration change. wlsxTrapGlobalConfigObj Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This variable represents the AMAPI object corresponding to the global configuration change.
wlsxVoiceCurrentNumCdr Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the number of CDRs in buffer. History Added in ArubaOS 3.1.0.0. wlsxTrapTunnelId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the tunnel ID. wlsxTrapTunnelStatus Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the tunnel status.
wlsxTraptimeStr Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the Time in String format. wlsxTrapMasterIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the master IP address. wlsxTrapLocaIIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the local IP address. wlsxTrapMasterName Syntax DisplayString(Size(0..
wlsxTrapBackupControllerIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP address of the AP's backup controller. wlsxTrapSpoofedFrameType Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Spoofed Frame Type wlsxTrapAssociationType Syntax DisplayString (SIZE(0..
wlsxTrapVcMacAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object represents the MAC address of a Voice client. wlsxTrapAPName Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Name of the AP. wlsxTrapApMode Syntax Integer32 Max-Access accessible-for-notify Status current Description This Object represents the AP Mode.
wlsxTrapAPCurMode Syntax INTEGER{airMonitor(1),accessPoint(2),accessPointAndMonitor(3),meshPortal(4),meshPoint( 5),rfprotectSensor(6),spectrumSensor(7)} Max-Access accessible-for-notify Status current Description This Object represents the APs Current Mode.
wlsxTrapAPControllerIp Syntax IpAddress Max-Access accessible-for-notify Status current Description IP address of the controller to which the AP is (or was most recently) registered. wlsxTrapApMasterStatus Syntax INTEGER {create(1),delete(2),modify(3)} Max-Access accessible-for-notify Status current Description Status of the AP as seen by the master when the status changes. wlsxTrapCaName Syntax DisplayString (SIZE(0..
ai Traps Definitions Group Table 13 ai Traps Definitions Group OIDs 70 | Traps Object Object ID wlsxNodeRateAnomaly 1.3.6.1.4.1.14823.2.3.3.1.200.2.1003 wlsxTrapDefinitionsGroup 1003 wlsxNUserEntryCreated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1014 wlsxTrapDefinitionsGroup 1014 wlsxNUserEntryDeleted 1.3.6.1.4.1.14823.2.3.3.1.200.2.1015 wlsxTrapDefinitionsGroup 1015 wlsxNUserEntryAuthenticated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1016 wlsxTrapDefinitionsGroup 1016 wlsxNUserEntryDeAuthenticated 1.3.6.1.
Table 13 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxChannelMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1058 wlsxTrapDefinitionsGroup 1058 wlsxOUIMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1059 wlsxTrapDefinitionsGroup 1059 wlsxSSIDMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1060 wlsxTrapDefinitionsGroup 1060 wlsxShortPreableMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1061 wlsxTrapDefinitionsGroup 1061 wlsxWPAMisconfiguration 1.3.6.1.4.1.14823.2.3.3.
Table 13 ai Traps Definitions Group OIDs (Continued) 72 | Traps Object Object ID wlsxFrameNonUnicastRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1079 wlsxTrapDefinitionsGroup 1079 wlsxLoadbalancingEnabled 1.3.6.1.4.1.14823.2.3.3.1.200.2.1080 wlsxTrapDefinitionsGroup 1080 wlsxLoadbalancingDisabled 1.3.6.1.4.1.14823.2.3.3.1.200.2.1081 wlsxTrapDefinitionsGroup 1081 wlsxChannelFrameRetryRateExceede d 1.3.6.1.4.1.14823.2.3.3.1.200.2.
Table 13 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxWEPMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1100 wlsxTrapDefinitionsGroup 1100 wlsxStaRepeatWEPIVViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1101 wlsxTrapDefinitionsGroup 1101 wlsxStaWeakWEPIVViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1102 wlsxTrapDefinitionsGroup 1102 wlsxStaAssociatedToUnsecureAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1103 wlsxTrapDefinitionsGroup 1103 wlsxStaUnAssociatedFromUnsecure AP 1.3.6.1.4.1.
Table 13 ai Traps Definitions Group OIDs (Continued) 74 | Traps Object Object ID wlsxSignStaDeauthBcast 1.3.6.1.4.1.14823.2.3.3.1.200.2.1143 wlsxTrapDefinitionsGroup 1143 wlsxWindowsBridgeDetectedAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1144 wlsxTrapDefinitionsGroup 1144 wlsxWindowsBridgeDetectedSta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1145 wlsxTrapDefinitionsGroup 1145 wlsxAdhocNetworkBridgeDetectedA P 1.3.6.1.4.1.14823.2.3.3.1.200.2.
Table 13 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxNStaUnAssociatedFromUnsecur eAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1176 wlsxTrapDefinitionsGroup 1176 wlsxOmertaAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1177 wlsxTrapDefinitionsGroup 1177 wlsxTKIPReplayAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1178 wlsxTrapDefinitionsGroup 1178 wlsxChopChopAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1179 wlsxTrapDefinitionsGroup 1179 wlsxFataJackAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.
Table 13 ai Traps Definitions Group OIDs (Continued) 76 | Traps Object Object ID wlsxNSuspectRogueAPResolved 1.3.6.1.4.1.14823.2.3.3.1.200.2.1197 wlsxTrapDefinitionsGroup 1197 wlsxBlockAckAttackDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1198 wlsxTrapDefinitionsGroup 1198 wlsxHotspotterAttackDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1199 wlsxTrapDefinitionsGroup 1199 wlsxNSignatureMatch 1.3.6.1.4.1.14823.2.3.3.1.200.2.1200 wlsxTrapDefinitionsGroup 1200 wlsxNSignatureMatchNetstumbler 1.3.6.1.4.
Table 13 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxUserEntryAttributesChanged 1.3.6.1.4.1.14823.2.3.3.1.200.2.1219 wlsxTrapDefinitionsGroup 1219 wlsxPowerSaveDosAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1220 wlsxTrapDefinitionsGroup 1220 wlsxNAPMasterStatusChange 1.3.6.1.4.1.14823.2.3.3.1.200.2.1221 wlsxTrapDefinitionsGroup 1221 wlsxNAdhocUsingValidSSID 1.3.6.1.4.1.14823.2.3.3.1.200.2.1022 wlsxTrapDefinitionsGroup 1222 wlsxMgmtUserAuthenticationFailed 1.3.6.1.4.1.14823.2.
wlsxNUserAuthenticationFailed Objects wlsxTrapTime, wlsxTrapUserIpAddress, wlsxTrapUserPhyAddress Status current Description This trap indicates that a user authentication has failed. wlsxNAuthServerReqTimedOut Objects wlsxTrapTime, wlsxTrapAuthServerName Status current Description This trap indicates that the authentication server request timed out.
wlsxNStationAddedToBlackList Objects { wlsxTrapTime, wlsxTrapNodeMac, wlsxTrapStationBlackListReason } Status current Description This trap indicates that the station is black listed. wlsxNStationRemovedFromBlackList Objects {wlsxTrapTime, wlsxTrapNodeMac } Status current Description This trap indicates that the station is removed from the black list.
wlsxReservedChannelViolation Objects {wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM detected an access point which is violating the Reserved Channel configuration.
wlsxWPAMisconfiguration Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP detected an access point that is misconfigured because it is not using WPA.
wlsxChannelInterferenceDetected Objects { wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation,wlsxTrapAPChannel } Status current Description This trap indicates that an AP has detected channel interference. wlsxChannelInterferenceCleared Objects {wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that a previously detected channel interference is no longer present.
wlsxFrameRetryRateExceeded Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Retry Rate.
wlsxFrameNonUnicastRateExceeded Objects { wlsxTrapTime, wlsxTrapNodeMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP detected that station has exceeded the configured upper threshold for Non Unicast traffic rate.
wlsxSignatureMatchAP Objects { wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber,wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected a signature match in a frame from an access point.
wlsxEAPRateAnomaly Objects { wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that the rate of EAP Handshake packets received by an AP has exceeded the configured IDS EAP Handshake rate threshold. For more info check:http://www.wve.
wlsxDisconnectStationAttack Objects { wlsxTrapTime, wlsxTrapFrameType, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AM detected a station Disconnect attack. For more info check:http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046http://www.wve.
wlsxInvalidMacOUISta Objects { wlsxTrapTime, wlsxTrapAddressType, wlsxTrapNodeMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected an invalid MAC OUI in the SRC or DST address of a frame. An invalid MAC OUI suggests that the frame may be spoofed.
wlsxAdhocNetworkBridgeDetected Objects { wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM has detected an Ad hocnetwork that is bridging to a wired network.
wlsxWindowsBridgeDetected Objects { wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM has detected a station that is bridging from a wireless network to a wired network.
wlsxSignAPAirjack Objects { wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected a signature match for AirJack from an access point.For more info check:http://www.wve.
wlsxSignStaDeauthBcast Objects { wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected a signature match for Deauth-Broadcast from a Station.For more info check:http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.
wlsxDisconnectStationAttackAP Objects { wlsxTrapTime, wlsxTrapFrameType, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AM detected a station Disconnect attack. For more info check:http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.
wlsxHT40MHzIntoleranceSta Objects { wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapSnr, wlsxTrapAPChannel,wlsxTrapFrameType, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that the system is detecting an HT 40MHz Intolerance setting from a Station. For more info check:http://www.wve.
wlsxValidClientNotUsingEncryption Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapNodeMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected an unencrypted data frame between a valid client and an access point.
wlsxNDisconnectStationAttack Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP has determined that a client is under Disconnect Attack because the rate of Assoc/Reassoc Response packets received by that client exceeds the configured threshold. For more info check:http://www.wve.
wlsxFataJackAttack Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapBackupControllerIp, wlsxTrapPrimaryControllerIp } Status current Description This trap indicates that an AP detected a FATA-Jack attack. For more info check:http://www.wve.
wlsxOverflowIEDetected Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapTargetAPBSSID, wlsxTrapAPChannel, wlsxTrapSnr Status current Description This trap indicates that an AP detected a management frame with a malformed information element. The declared length of the element is larger than the entire frame containing the element. This may be used to corrupt or crash wireless drivers. For more info check:http://www.
wlsxCTSRateAnomaly Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that the rate of CTS packets received by an AP exceeds the configured IDS threshold.
wlsxNSuspectRogueAPDetected Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPChannel, wlsxTrapConfidenceLevel Status current Description This trap indicates that an access point, classified as Suspected Rogue, is detected by the system. The AP is suspected to be rogue with the supplied confidence level.
wlsxNSignatureMatchNetstumbler Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a signature match for Netstumbler in a frame. For more info check:http://www.wve.
wlsxNSignatureMatchDisassocBcast Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Max-Access Status current Description This trap indicates that an AP detected a signature match for Disassoc-Broadcast in a frame. For more info check:http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.
wlsxClientWiredContainment Objects wlsxTrapTime, wlsxTrapNodeMac, wlsxTrapTargetAPBSSID, wlsxTrapDeviceIpAddress, wlsxTrapDeviceMac, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface.
wlsxAPPowerChange Objects wlsxTrapTime, wlsxTrapAPTxPower, wlsxTrapAPPrevTxPower, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP changed its transmit power level. wlsxAPModeChange Objects wlsxTrapTime, wlsxTrapAPCurMode, wlsxTrapAPPrevMode, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP changed its mode from AP to APMonitor or vice versa.
wlsxMgmtUserAuthenticationFailed Objects wlsxTrapTime, wlsxTrapUserName, wlsxTrapUserIpAddress, wlsxTrapAuthServerName Status current Description This trap indicates that a management user authentication has failed.
| Traps Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
Index A S Agents 21 Sequence 21 Status 21 Syntax 21 D Description 21 E Entry 26 G group 26 H T Traps MIB hierarchy 47 X xTrapLocaIIp 65 History ArubaOS 3.
| Index Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide