Reference Guide Dell Networking W-Series Instant Access Point 6.3.1.1-4.
Copyright © 2013 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks®, Aruba ® Wireless Networks , the registered Aruba the Mobile Edge Company logo, and Aruba Mobility Management System®. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA. All other trademarks are the property of their respective owners.
Contents Contents 3 About this Guide 20 Intended Audience 20 Related Documents 20 Conventions 20 Contacting Dell 21 MIBs Overview 22 MIBs 22 SNMP 23 Using MIBs 25 Downloading MIB Files 25 Reporting WLAN Health 25 SNMP Operations on W-IAPs 25 MIB Browsers 26 Reading MIB Files 27 Opening Line 27 Imports 27 Inheritance 27 Identity 28 MIB Modules 28 Group 28 Table 28 Entry 28 Closing Line 29 SNMP File 29 HP OpenView 29 Dell W-Instant MIBs aiInfoGroup aiVirtua
aiVirtualControllerName 31 aiVirtualControllerOrganization 32 aiVirtualControllerVersion 32 aiVirtualControllerIPAddress 32 aiMasterIPAddress 32 aiStateGroup aiAccessPointTable 4 | Contents 33 33 aiAccessPointEntry 33 aiAPMACAddress 33 aiAPName 34 aiAPIPAddress 34 aiAPSerialNum 34 aiAPModel 34 aiAPModelName 34 aiAPCPUUtilization 35 aiAPMemoryFree 35 aiAPUptime 35 aiAPTotalMemory 35 aiAPStatus 35 aiRadioTable 35 aiRadioEntry 36 aiRadioAPMacAddress 37 aiRadioIndex 3
aiRadioTxDataBytes 39 aiRadioTxDrops 39 aiRadioRxTotalFrames 39 aiRadioRxDataFrames 39 aiRadioRxDataBytes 39 aiRadioRxMgmtFrames 40 aiRadioRxBad 40 aiRadioPhyEvents 40 aiRadioStatus 40 aiWlanTable 40 aiWlanEntry 41 aiWlanAPMACAddress 41 aiWlanIndex 41 aiWlanESSID 42 aiWlanMACAddress 42 aiWlanTxTotalFrames 42 aiWlanTxDataFrames 42 aiWlanTxDataBytes 42 aiWlanRxTotalFrames 42 aiWlanRxDataFrames 43 aiWlanRxDataBytes 43 aiClientTable 43 aiClientEntry 44 aiClientMACAd
aiClientTxRetries 46 aiClientTxRate 46 aiClientRxDataFrames 46 aiClientRxDataBytes 46 aiClientRxRetries 47 aiClientRxRate 47 aiClientUptime 47 Standard SNMP MIBs 48 System MIB 48 sysDescr 48 sysObjectID 49 sysUpTime 49 sysName 49 sysLocation 49 sysServices 50 dot1qTpFdbTable 50 dot1qFdbId 50 dot1qTpFdbAddress 50 dot1qTpFdbPort 50 dot1qTpFdbStatu 51 ifTable 6 | Contents 51 ifIndex 52 ifDescr 52 ifType 52 ifMtu 53 ifSpeed 53 ifPhysAddress 53 ifAdminStatus
ifInDiscards 54 ifInErrors 55 ifOutOctets 55 ifOutUcastPkts 55 ifOutDiscards 55 ifOutErrors 55 ifXTable 56 ifName 56 ifInMulticastPkts 57 ifInBroadcastPkts 57 ifOutMulticastPkts 57 ifOutBroadcastPkts 57 ifHCInOctets 58 ifHCInUcastPkts 58 ifHCInMulticastPkts 58 ifHCInBroadcastPkts 58 ifHCOutOctets 59 ifHCOutUcastPkts 59 ifHCOutMulticastPkts 59 ifHCOutBroadcastPkts 60 ifLinkUpDownTrapEnable 60 ifPromiscuousMode 60 ifConnectorPresent 60 Traps Trap Hierarchy 61 61
| Contents wlsxTrapNodeMac 67 wlsxTrapSourceMac 67 wlsxReceiverMac 67 wlsxTrapTransmitterMac 68 wlsxTrapReceiverMac 68 wlsxTrapSnr 68 wlsxTrapSignatureName 68 wlsxTrapFrameType 68 wlsxTrapAddressType 69 wlsxTrapAPLocation 69 wlsxTrapAPChannel 69 wlsxTrapAPTxPower 69 wlsxTrapMatchedMac 69 wlsxTrapMatchedIp 69 wlsxTrapRogueIfoURL 70 wlsxTrapVLANId 70 wlsxTrapAdminStatus 70 wlsxTrapOperStatus 70 wlsxTrapAuthServerName 70 wlsxTrapAuthServerTimeout 71 wlsxTrapCardSlot
wlsxTrapDBIpAddress 73 wlsxTrapDBType 73 wlsxTrapVrrpID 73 wlsxTrapVrrpMasterIp 74 wlsxTrapVrrpOperState 74 wlsxTrapESIServerGrpName 74 wlsxTrapESIServerName 74 wlsxTrapESIServerIpAddress 74 wlsxTrapLicenseDaysRemaining 75 wlsxTrapSwitchIp 75 wlsxTrapSwitchRole 75 wlsxTrapUserIpAddress 75 wlsxTrapUserPhyAddress 75 wlsxTrapUserName 75 wlsxTrapUserRole 76 wlsxTrapUserAuthenticationMethod 76 wlsxTrapAPRadioNumber 76 wlsxTrapRogueInfoURL 76 wlsxTrapInterferingAPInfoURL 76 w
| Contents wlsxTrapLicenseId 79 wlsxTrapConfidenceLevel 79 wlsxTrapMissingLicenses 79 wlsxVoiceCurrentNumCdr 80 wlsxTrapTunnelId 80 wlsxTrapTunnelStatus 80 wlsxTrapTunnelUpReason 80 wlsxTrapTunnelDownReason 80 wlsxTrapApSerialNumber 81 wlsxTraptimeStr 81 wlsxTrapMasterIp 81 wlsxTrapLocaIIp 81 wlsxTrapMasterName 81 wlsxTrapLocalName 81 wlsxTrapPrimaryControllerIp 82 wlsxTrapBackupControllerIp 82 wlsxTrapSpoofedFrameType 82 wlsxTrapAssociationType 82 wlsxTrapDeviceIpAdd
wlsxTrapAPControllerIp 85 wlsxTrapApMasterStatus 85 wlsxTrapCaName 85 wlsxTrapCrlName 86 wlsxTrapCount 86 wlsxTrapAPPreviousUplinkType 86 wlsxTrapAPPreviousUplinkActiveTime 86 wlsxTrapAPActiveUplinkType 86 wlsxTrapAPUplinkChangeReason 86 wlsxTrapAPManagedModeConfigFailure 87 ai Traps Objects Group 87 wlsxTrapAPMacAddress 91 wlsxTrapAPIpAddress 91 wlsxTrapAPBSSID 91 wlsxTrapEssid 92 wlsxTrapTargetAPBSSID 92 wlsxTrapTargetAPSSID 92 wlsxTrapTargetAPChannel 92 wlsxTrapNodeMac
| Contents wlsxTrapRogueIfoURL 95 wlsxTrapVLANId 95 wlsxTrapAdminStatus 96 wlsxTrapOperStatus 96 wlsxTrapAuthServerName 96 wlsxTrapAuthServerTimeout 96 wlsxTrapCardSlot 96 wlsxTrapTemperatureValue 97 wlsxTrapProcessName 97 wlsxTrapFanNumber 97 wlsxTrapVoltageType 97 wlsxTrapVoltageValue 97 wlsxTrapStationBlackListReason 97 wlsxTrapSpoofedIpAddress 98 wlsxTrapSpoofedOldPhyAddress 98 wlsxTrapSpoofedNewPhyAddress 98 wlsxTrapDBName 98 wlsxTrapDBUserName 98 wlsxTrapDBIpAdd
wlsxTrapUserRole 101 wlsxTrapUserAuthenticationMethod 101 wlsxTrapAPRadioNumber 102 wlsxTrapRogueInfoURL 102 wlsxTrapInterferingAPInfoURL 102 wlsxTrapPortNumber 102 wlsxTrapTime 102 wlsxTrapHostIp 103 wlsxTrapHostPort 103 wlsxTrapConfigurationId 103 wlsxTrapCTSURL 103 wlsxTrapCTSTransferType 103 wlsxTrapConfigurationState 104 wlsxTrapUpdateFailureReason 104 wlsxTrapUpdateFailedObj 104 wlsxTrapTableEntryChangeType 104 wlsxTrapGlobalConfigObj 104 wlsxTrapTableGenNumber 105
wlsxTrapPrimaryControllerIp 107 wlsxTrapBackupControllerIp 108 wlsxTrapSpoofedFrameType 108 wlsxTrapAssociationType 108 wlsxTrapDeviceIpAddress 108 wlsxTrapDeviceMac 108 wlsxTrapVcIpAddress 108 wlsxTrapVcMacAddress 109 wlsxTrapAPName 109 wlsxTrapApMode 109 wlsxTrapAPPrevChannel 109 wlsxTrapAPPrevChannelSec 109 wlsxTrapAPPrevTxPower 110 wlsxTrapAPCurMode 110 wlsxTrapAPPrevMode 110 wlsxTrapAPARMChangeReason 110 wlsxTrapAPChannelSec 110 wlsxTrapUserAttributeChangeType 110 wl
wlsxNUserEntryDeAuthenticated 119 wlsxNUserAuthenticationFailed 119 wlsxNAuthServerReqTimedOut 120 wlsxNAuthServerTimedOut 120 wlsxNAuthServerIsUp 120 wlsxNAccessPointIsUp 120 wlsxNChannelChanged 120 wlsxNStationAddedToBlackList 121 wlsxNStationRemovedFromBlackList 121 wlsxNRadioAttributesChanged 121 wlsxUnsecureAPDetected 121 wlsxUnsecureAPResolved 121 wlsxStaImpersonation 122 wlsxReservedChannelViolation 122 wlsxValidSSIDViolation 122 wlsxChannelMisconfiguration 122 wlsxOUI
| Contents wlsxFrameReceiveErrorRateExceeded 126 wlsxFrameFragmentationRateExceeded 126 wlsxFrameBandWidthRateExceeded 126 wlsxFrameLowSpeedRateExceeded 126 wlsxFrameNonUnicastRateExceeded 126 wlsxLoadbalancingEnabled 127 wlsxLoadbalancingDisabled 127 wlsxChannelFrameRetryRateExceeded 127 wlsxChannelFrameFragmentationRateExceeded 127 wlsxChannelFrameErrorRateExceeded 127 wlsxSignatureMatchAP 128 wlsxSignatureMatchSta 128 wlsxChannelRateAnomaly 128 wlsxNodeRateAnomaly 128 wlsx
wlsxInterferingApDetected 133 wlsxColdStart 133 wlsxWarmStart 133 wlsxAPImpersonation 133 wlsxNAuthServerIsDown 133 wlsxWindowsBridgeDetected 134 wlsxSignAPNetstumbler 134 wlsxSignStaNetstumbler 134 wlsxSignAPAsleap 134 wlsxSignStaAsleap 134 wlsxSignAPAirjack 135 wlsxSignStaAirjack 135 wlsxSignAPNullProbeResp 135 wlsxSignStaNullProbeResp 135 wlsxSignAPDeauthBcast 135 wlsxSignStaDeauthBcast 136 wlsxWindowsBridgeDetectedSta 136 wlsxAdhocNetworkBridgeDetectedAP 136 wlsxAdhoc
| Contents wlsxOverflowEAPOLKeyDetected 143 wlsxMalformedFrameLargeDurationDetected 143 wlsxMalformedFrameWrongChannelDetected 143 wlsxMalformedAuthFrame 143 wlsxCTSRateAnomaly 143 wlsxRTSRateAnomaly 144 wlsxNRogueAPDetected 144 wlsxNRogueAPResolved 144 wlsxNeighborAPDetected 144 wlsxNInterferingAPDetected 144 wlsxNSuspectRogueAPDetected 145 wlsxNSuspectRogueAPResolved 145 wlsxBlockAckAttackDetected 145 wlsxHotspotterAttackDetected 145 wlsxNSignatureMatch 146 wlsxNSignature
wlsxUserEntryAttributesChanged 150 wlsxNAPMasterStatusChange 150 wlsxNAdhocUsingValidSSID 150 wlsxMgmtUserAuthenticationFailed 150 SNMP Traps 151 linkDown 151 linkUp 151 Dell Networking W-Series Instant 6.3.1.1-4.
Chapter 1 About this Guide This guide provides information on Management Information Base (MIBs) supported in Dell Networking W-Series Instant Access Point 6.3.1.1-4.0 software release. Intended Audience This manual is intended for network administrators and operators responsible for managing the Dell Networking WSeries Instant Access Point (W-IAP).
The following informational icons are used throughout this guide: Indicates helpful suggestions, pertinent information, and important things to remember. Indicates a risk of damage to your hardware or loss of data. Indicates a risk of personal injury or death. Contacting Dell Table 2: Support Information Support Main Website dell.com Contact Information dell.com/contactdell Support Website dell.com/support Documentation Website dell.
Chapter 2 MIBs Overview This chapter provides information about Management Information Base (MIBs) supported in Dell Networking WSeries Instant Access Point 6.3.1.1-4.0 software release. MIBs A MIB is a virtual database that contains information used for network management. Each managed device contains MIBs that define its properties.
Table 3 indicates the numerical string that lists the nodes of the enterprise MIB hierarchy. Table 3: MIB Node Identification - Enterprise Nodes Name 1 1 OSI 3 1.3 ORG 6 1.3.6 DOD 1 1.3.6.1 Internet 4 1.3.6.1.4 Private 1 1.3.6.1.4.1 Enterprise 674 1.3.6.1.4.1.674 Dell The information provided by a MIB is a file that describes network elements with numerical strings. This information is compiled into readable text by the SNMP manager.
Table 4: MIB Keywords Keyword Description Sequence Refers to the sequence of objects of the MIB. This keyword is used with entry MIB objects to list the MIB objects that exchange information. Syntax Textual conventions, for example, Integer32.
Chapter 3 Using MIBs This chapter provides information on using MIBs. l Downloading MIB Files on page 25 l Reporting WLAN Health on page 25 l Reading MIB Files on page 27 l SNMP File on page 29 l HP OpenView on page 29 Downloading MIB Files The latest Dell W-Instant MIB files are available for registered customers at download.dell-pcw.com. For assistance to set up an account and access files, contact customer service. See Contacting Dell on page 21.
MIB Browsers If you are using an application that is run through the Linux shell, the command would be as follows: snmpget -v 2c -c The following is an example of snmpget command to obtain information. Figure 2 shows how information may be obtained through a graphical user interface (GUI). The user interface and the available features vary by application. Figure 2 Graphical User Interface 26 | Using MIBs Dell Networking W-Series Instant 6.3.1.1-4.
Reading MIB Files This section describes how to interpret the basic components of a MIB file. To determine the OIDs, view the file snmp.h. For more information, see SNMP File on page 29. MIB files describe a specific component of a network device. The files are numerical strings that are converted to ASCII text by the compiler of the SNMP manager. A word processor or text editor can be used to open the ASCII file.
aiEnterpriseMibModules FROM ARUBA-MIB; Identity Identity is the opening description of the MIB. The information includes contact information for the vendor and a general description of the MIB. aiMIB MODULE-IDENTITY LAST-UPDATED "0804160206Z" ORGANIZATION "Aruba Wireless Networks" CONTACT-INFO "Postal: 1322 Crossman Avenue Sunnyvale, CA 94089 E-mail: dl-support@arubanetworks.
SYNTAX AiAccessPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { aiAPMACAddress } ::= { aiAccessPointTable 1 } AiAccessPointEntry ::= SEQUENCE { aiAPMACAddress MacAddress, aiAPName DisplayString, aiAPIPAddress IpAddress, aiAPSerialNum DisplayString, aiAPModel OBJECT IDENTIFIER, aiAPModelName DisplayString, aiAPCPUUtilization Integer32, aiAPMemoryFree Integer32, aiAPUptime TimeTicks Closing Line Following is the closing line—the end of the MIBs file. END SNMP File The snmp.
Chapter 4 Dell W-Instant MIBs The chapter provides information about the Dell W-Instant MIB objects. Figure 3 shows the architecture of the Dell W-Instant MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Instant MIB is listed in the file aruba-instant.my. For information about downloading the MIB file, see Downloading MIB Files on page 25. Figure 3 MIB Hierarchy Dell Networking W-Series Instant 6.3.1.1-4.
The Dell W-Instant MIB tree consists of the following MIB groups and tables. Table 5: Supported Dell W-Instant MIBs and MIB Tables Group Description aiInfoGroup Contains details of the virtual controller. For more information, see aiInfoGroup on page 31. aiStateGroup Contains information about status of the Access Point, Radio, WLAN, and Clients connected to an W-IAP.
Status Current Description Name of the Virtual Controller aiVirtualControllerOrganization Object ID 1.3.6.1.4.1.14823.2.3.3.1.1.3 Syntax DisplayString Max-Access Read-only Status Current Description Virtual Controller organization aiVirtualControllerVersion Object ID 1.3.6.1.4.1.14823.2.3.3.1.1.4 Syntax DisplayString Max-Access Read-only Status Current Description Software version of the controller aiVirtualControllerIPAddress Object ID 1.3.6.1.4.1.14823.2.3.3.1.1.
aiStateGroup The aiStateGroup contains the following tables: l aiAccessPointTable l aiRadioTable l aiWlanTable l aiClientTable aiAccessPointTable The objects of the aiAccessPointTable provide information about all the W-IAPs connected to the virtual controller. Table 6: aiAccessPointTable OIDs Object Object ID Entry OID aiAccessPointEntry 1.3.6.1.4.1.14823.2.3.3.1.2.1.1 aiAccessPointTable 1 aiAPMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.1.1.1 aiAccessPointEntry 1 aiAPName 1.3.6.1.4.1.14823.2.
Max-Access read-only Status current Description MAC address of the Access Point. aiAPName Syntax DisplayString (SIZE(0..64)) Max-Access read-only Status current Description Name of the Access Point. aiAPIPAddress Syntax IpAddress Max-Access read-only Status current Description IP address of the Access Point. aiAPSerialNum Syntax DisplayString (SIZE(0..64)) Max-Access read-only Status current Description Serial number of the Access Point.
aiAPCPUUtilization Syntax Integer32 Max-Access read-only Status current Description CPU utilization of the Access Point. aiAPMemoryFree Syntax Integer32 Max-Access read-only Status current Description Amount of memory free in the access point in bytes. aiAPUptime Syntax TimeTicks Max-Access read-only Status current Description Uptime of the Access Point.
Table 7: aiRadioTable OIDs Object Object ID Entry OID aiRadioEntry 1.3.6.1.4.1.14823.2.3.3.1.2.2.1 aiRadioTable 1 aiRadioAPMacAddress 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.1 aiRadioEntry 1 aiRadioIndex 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.2 aiRadioEntry 2 aiRadioMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.3 aiRadioEntry 3 aiRadioChannel 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.4 aiRadioEntry 4 aiRadioTransmitPower 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.5 aiRadioEntry 5 aiRadioNoiseFloor 1.3.6.1.4.1.14823.2.3.3.1.
aiRadioAPMacAddress Syntax MacAddress (OCTET STRING). Hint: 1x: Max-Access read-only Status current Description MAC Address of the Access Point where this radio is active. aiRadioIndex Syntax Integer32 Max-Access read-only Status current Description Radio number of the Access Point. aiRadioMACAddress Syntax MacAddress Max-Access read-only Status current Description Radio MAC address of the Access Point.
aiRadioNoiseFloor Syntax Integer32 Max-Access read-only Status current Description Radio noise of the Access Point in dBm. aiRadioUtilization4 Syntax Integer32 Max-Access read-only Status current Description Radio channel utilization 4 second average. aiRadioUtilization64 Syntax Integer32 Max-Access read-only Status current Description Radio channel utilization 64 second average.
Status current Description Total number of data frames transmitted. aiRadioTxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of data bytes transmitted. aiRadioTxDrops Syntax Counter32 Max-Access read-only Status current Description Total number of frames dropped during transmission. aiRadioRxTotalFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received frames.
aiRadioRxMgmtFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received management frames. aiRadioRxBad Syntax Counter32 Max-Access read-only Status current Description Total number of frames received in error. aiRadioPhyEvents Syntax Counter32 Max-Access read-only Status current Description Number of physical layer events that indicates frames not received because of interference.
Object Object ID Entry OID aiWlanIndex 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.2 aiWlanEntry 2 aiWlanESSID 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.3 aiWlanEntry 3 aiWlanMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.4 aiWlanEntry 4 aiWlanTxTotalFrames 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.5 aiWlanEntry 5 aiWlanTxDataFrames 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.6 aiWlanEntry 6 aiWlanTxDataBytes 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.7 aiWlanEntry 7 aiWlanRxTotalFrames 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.
aiWlanESSID Syntax DisplayString Max-Access read-only Status current Description ESSID of the WLAN aiWlanMACAddress Syntax MacAddress (OCTET STRING). Hint: 1x: Max-Access read-only Status current Description BSSID of the WLAN aiWlanTxTotalFrames Syntax Counter32 Max-Access read-only Status current Description Total number of frames transmitted. aiWlanTxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of data frames transmitted.
Status current Description Total number of received frames. aiWlanRxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received data frames. aiWlanRxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of received data bytes. aiClientTable The objects of the aiWlanTable provide information about all the clients connected to the virtual controller.
Object Object ID Entry OID aiClientRxDataFrames 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.12 aiClientEntry 12 aiClientRxDataBytes 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.13 aiClientEntry 13 aiClientRxRetries 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.14 aiClientEntry 14 aiStateGroup 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.15 aiClientEntry 15 aiClientUptime 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.
aiClientAPIPAddress Syntax IpAddress Max-Access read-only Status current Description Radio channel. First byte contains primary channel and first two bits on second byte contains indicator for secondary channel. If first two bits of second byte is 0, it is a 20MHz channel. If first two bits of second byte is 01, secondary channel is above primary channel, if first two bits of second by is 10, secondary channel is below the primary channel.
aiClientTxDataBytes Syntax Max-Access read-only Status current Description Total number of bytes transmitted by the client. aiClientTxRetries Syntax Max-Access read-only Status current Description Total number of retry frames transmitted by the client. aiClientTxRate Syntax Integer32 Max-Access read-only Status current Description Transmission rate of the client in mbps.
aiClientRxRetries Syntax Max-Access read-only Status current Description Total number of retry frames received by the client. aiClientRxRate Syntax Max-Access read-only Status current Description Receiving rate of the client in mbps. aiClientUptime 47 | Dell W-Instant MIBs Syntax TimeTicks Max-Access read-only Status current Description Client uptime. On mobility event all counters are reset to 0 and uptime resets to 0. Dell Networking W-Series Instant 6.3.1.1-4.
Chapter 5 Standard SNMP MIBs This section provides information on the following standard MIBs modules and tables supported in this release of Dell W-Instant. l System MIB l dot1qTpFdbTable l ifTable l ifXTable System MIB The system MIB contains system-specific information about the W-IAP. The following system MIB objects are supported: l sysDescr— Provides information on the W-IAP model and software version of the W-IAP. l sysObjectID —Identifies the network management subsystem.
sysObjectID Object ID 1.3.6.1.2.1.1.2 Syntax Object Identifier Max-Access read-only Status mandatory Description The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. sysUpTime Object ID 1.3.6.1.2.1.1.
sysServices Object ID 1.3.6.1.2.1.1.7 Syntax Integer Max-Access read-only Status mandatory Description A value which indicates the set of services that the AP primarily offers. dot1qTpFdbTable This table contains information about the associated station MAC addresses, the corresponding port from the interface table, and status. The objects of the dot1qTpFdbTable provide information about the forwarding and filtering status of the clients connected to wired ports and wireless interfaces.
Syntax Integer32 (0..65535) Max-Access read-only Status current Description Port number on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress. The index value of ifTable is set as the port number field in this table. If the self MAC address is used, the index is 0. dot1qTpFdbStatu Object ID 1.3.6.1.2.1.17.7.1.2.2.1.
The following ifTable objects are not supported: l ifOutQLen l ifSpecific l ifInUnknownProtos l ifLastChange ifIndex Object ID 1.3.6.1.2.1.2.2.1.1 Syntax Integer32 Max-Access read-only Status current Description Value assigned to an interface. Ethernet interface value range: 1—49 l Radio 0 interface value range: 50—69. l Radio 1 interface range: 70—89.
ifMtu Object ID 1.3.6.1.2.1.2.2.1.4 Syntax Integer32 Max-Access read-only Status current Description The size of the largest packet which can be sent or received on interface. Object ID 1.3.6.1.2.1.2.2.1.5 Syntax Gauge32 Max-Access read-only Status current Description The current bandwidth of the interface in bits per second. ifSpeed ifPhysAddress Object ID 1.3.6.1.2.1.2.2.1.
Max-Access read-only Status current Description Operational status of the interface. ifInOctets Object ID 1.3.6.1.2.1.2.2.1.10 Syntax Counter32 Max-Access read-only Status current Description Number of octets received on the interface. ifInUcastPkts Object ID 1.3.6.1.2.1.2.2.1.
ifInErrors Object ID 1.3.6.1.2.1.2.2.1.14 Syntax Counter32 Max-Access read-only Status current Description The number of packets transmission units with errors. ifOutOctets Object ID 1.3.6.1.2.1.2.2.1.16 Syntax Counter32 Max-Access read-only Status current Description The total number of octets transmitted out of the interface. ifOutUcastPkts Object ID 1.3.6.1.2.1.2.2.1.
Syntax Counter32 Max-Access read-only Status current Description The number of outbound packets that could not be transmitted because of errors. ifXTable The ifXTable table contains the following additional objects for the interface table.
ifInMulticastPkts Object ID 1.3.6.1.2.1.31.1.1.1.2 Syntax Counter32 Max-Access read-only Status current Description The number of packets, delivered by this sub-layer to a higher layer, which were addressed to a multicast or broadcast address at this sublayer. ifInBroadcastPkts Object ID 1.3.6.1.2.1.31.1.1.1.
ifHCInOctets Object ID 1.3.6.1.2.1.31.1.1.1.6 Syntax Counter64 Max-Access read-only Status current Description The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. ifHCInUcastPkts Object ID 1.3.6.1.2.1.31.1.1.1.
Description The number of packets, delivered by this sub-layer to a higher sublayer, which were addressed to a multicast or broadcast address at this sub-layer. ifHCOutOctets Object ID 1.3.6.1.2.1.31.1.1.1.10 Syntax Counter64 Max-Access read-only Status current Description The total number of octets transmitted out of the interface, including framing characters. ifHCOutUcastPkts Object ID 1.3.6.1.2.1.31.1.1.1.
ifHCOutBroadcastPkts Object ID 1.3.6.1.2.1.31.1.1.1.13 Syntax Counter64 Max-Access read-only Status current Description The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sublayer, including those that were discarded or not sent. ifLinkUpDownTrapEnable Object ID 1.3.6.1.2.1.31.1.1.1.
Chapter 6 Traps This module defines the traps that can be generated by the W-IAP. Traps are MIB objects (variables) that transmit information to the SNMP Manager when an event occurs. Traps are included as varbinds (variable bindings) in the trap protocol data unit (PDU). Varbinds are defined in the Description section below. Figure 4 shows the architecture of the Traps MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Traps are listed in the file aruba-trap.
Table 10: aiTraps Objects Group OIDs 62 | Traps Object Object ID wlsxTrapTargetAPSSID 1.3.6.1.4.1.14823.2.3.3.1.200.1.6 wlsxTrapObjectsGroup 6 wlsxTrapTargetAPChannel 1.3.6.1.4.1.14823.2.3.3.1.200.1.7 wlsxTrapObjectsGroup 7 wlsxTrapNodeMac 1.3.6.1.4.1.14823.2.3.3.1.200.1.8 wlsxTrapObjectsGroup 8 wlsxTrapSourceMac 1.3.6.1.4.1.14823.2.3.3.1.200.1.9 wlsxTrapObjectsGroup 9 wlsxReceiverMac 1.3.6.1.4.1.14823.2.3.3.1.200.1.10 wlsxTrapObjectsGroup 10 wlsxTrapTransmitterMac 1.3.6.1.4.1.14823.2.3.
Table 10: aiTraps Objects Group OIDs Object Object ID wlsxTrapVoltageValue 1.3.6.1.4.1.14823.2.3.3.1.200.1.33 wlsxTrapObjectsGroup 33 wlsxTrapStationBlackListReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.34 wlsxTrapObjectsGroup 34 wlsxTrapSpoofedIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.35 wlsxTrapObjectsGroup 35 wlsxTrapSpoofedOldPhyAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.36 wlsxTrapObjectsGroup 36 wlsxTrapSpoofedNewPhyAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.
Table 10: aiTraps Objects Group OIDs 64 | Traps Object Object ID wlsxTrapTime 1.3.6.1.4.1.14823.2.3.3.1.200.1.60 wlsxTrapObjectsGroup 60 wlsxTrapHostIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.61 wlsxTrapObjectsGroup 61 wlsxTrapHostPort 1.3.6.1.4.1.14823.2.3.3.1.200.1.63 wlsxTrapObjectsGroup 62 wlsxTrapConfigurationId 1.3.6.1.4.1.14823.2.3.3.1.200.1.63 wlsxTrapObjectsGroup 63 wlsxTrapCTSURL 1.3.6.1.4.1.14823.2.3.3.1.200.1.64 wlsxTrapObjectsGroup 64 wlsxTrapCTSTransferType 1.3.6.1.4.1.14823.2.3.3.
Table 10: aiTraps Objects Group OIDs Object Object ID wlsxTrapBackupControllerIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.87 wlsxTrapObjectsGroup 87 wlsxTrapSpoofedFrameType 1.3.6.1.4.1.14823.2.3.3.1.200.1.88 wlsxTrapObjectsGroup 88 wlsxTrapAssociationType 1.3.6.1.4.1.14823.2.3.3.1.200.1.89 wlsxTrapObjectsGroup 89 wlsxTrapDeviceIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.90 wlsxTrapObjectsGroup 90 wlsxTrapDeviceMac 1.3.6.1.4.1.14823.2.3.3.1.200.1.91 wlsxTrapObjectsGroup 91 wlsxTrapVcIpAddress 1.3.6.
wlsxTrapAPMacAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the wired MAC address of an access point, for which the trap is being raised. wlsxTrapAPIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the IP address of an access point for which for which the trap is being raised.
wlsxTrapTargetAPSSID Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised. If an Air Monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself.
wlsxTrapTransmitterMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the transmitter. wlsxTrapReceiverMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the receiver.
wlsxTrapAddressType Syntax ArubaAddressType Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the address type. wlsxTrapAPLocation Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the location of the AP.
Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the IP address. wlsxTrapRogueIfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBUI Rogue AP information URL. wlsxTrapVLANId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the VLAN ID.
wlsxTrapAuthServerTimeout Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Authentication Server Timeout. wlsxTrapCardSlot Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the slot in which this card is present. wlsxTrapTemperatureValue Syntax DisplayString(Size(0..
wlsxTrapVoltageType Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the type of voltage. wlsxTrapVoltageValue Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the voltage value in float.
Max-Access accessible-for-notify Status current Description This object is used in a trap to identify a new MAC address. wlsxTrapDBName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the name of the database. wlsxTrapDBUserName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the name of the database user.
wlsxTrapVrrpMasterIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object contains the master IP address. wlsxTrapVrrpOperState Syntax ArubaVrrpState Max-Access accessible-for-notify Status current Description This object represents the VRRP operational state. wlsxTrapESIServerGrpName Syntax DisplayString(Size(0..
wlsxTrapLicenseDaysRemaining Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the number of days remaining prior to a license expiry. wlsxTrapSwitchIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the controller IP address. wlsxTrapSwitchRole Syntax ArubaSwitchRole Max-Access accessible-for-notify Status current Description This object represents the role of the controller.
Max-Access accessible-for-notify Status current Description This object represents the user name. wlsxTrapUserRole Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the Authentication method of the user. wlsxTrapUserAuthenticationMethod Syntax ArubaAuthenticationMethods Max-Access accessible-for-notify Status current Description This object represents the Authentication method of the user.
wlsxTrapPortNumber Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the port number. wlsxTrapTime Syntax DateAndTime Max-Access accessible-for-notify Status current Description This object is used in all the enterprise traps to indicate the time when the trap is generated on the controller.
wlsxTrapCTSURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the URL from which the transfer should happen. wlsxTrapCTSTransferType Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the transfer type, upload or download.
Max-Access accessible-for-notify Status current Description This object represents the type of the configuration change. wlsxTrapGlobalConfigObj Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This variable represents the AMAPI object corresponding to the global configuration change. wlsxTrapTableGenNumber Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the generation number of a table.
Max-Access accessible-for-notify Status current Description This variable indicates any licenses that are not present during a configuration update. wlsxVoiceCurrentNumCdr Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the number of CDRs in buffer. wlsxTrapTunnelId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the tunnel ID.
wlsxTrapApSerialNumber Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the AP serial number. wlsxTraptimeStr Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the Time in String format. wlsxTrapMasterIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the master IP address.
Max-Access accessible-for-notify Status current Description This object represents the local controller name. wlsxTrapPrimaryControllerIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP address of the AP's primary controller. wlsxTrapBackupControllerIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP address of the AP's backup controller.
wlsxTrapDeviceMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object represents the MAC address of a device seen by an AP. wlsxTrapVcIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP Address of a Voice client. wlsxTrapVcMacAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object represents the MAC address of a Voice client.
wlsxTrapAPPrevChannel Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Previous Channel. wlsxTrapAPPrevChannelSec Syntax ArubaHTExtChannel (INTEGER) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Previous Secondary Channel.
Max-Access accessible-for-notify Status current Description This Object represents the APs Previous Mode. wlsxTrapAPChannelSec Syntax ArubaHTExtChannel (INTEGER) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Current Secondary Channel.
wlsxTrapCrlName Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the name of the CRL. wlsxTrapCount Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the number of occurrence of this trap.
Max-Access accessible-for-notify Status current Description This object represents the uplink change reason. wlsxTrapAPManagedModeConfigFailure Syntax DisplayString (SIZE(0..64) Max-Access accessible-for-notify Status current Description This object indicates that the configuration application has failed on the AP. ai Traps Objects Group The following table lists the supported trap objects in this group: Table 11: aiTraps Objects Group OIDs Object Object ID wlsxTrapAPMacAddress 1.3.6.1.4.1.
| Traps Object Object ID wlsxTrapAPLocation 1.3.6.1.4.1.14823.2.3.3.1.200.1.17 wlsxTrapObjectsGroup 17 wlsxTrapAPChannel 1.3.6.1.4.1.14823.2.3.3.1.200.1.18 wlsxTrapObjectsGroup 18 wlsxTrapAPTxPower 1.3.6.1.4.1.14823.2.3.3.1.200.1.19 wlsxTrapObjectsGroup 19 wlsxTrapMatchedMac 1.3.6.1.4.1.14823.2.3.3.1.200.1.20 wlsxTrapObjectsGroup 20 wlsxTrapMatchedIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.21 wlsxTrapObjectsGroup 21 wlsxTrapRogueIfoURL 1.3.6.1.4.1.14823.2.3.3.1.200.1.
Object Object ID wlsxTrapESIServerGrpName 1.3.6.1.4.1.14823.2.3.3.1.200.1.45 wlsxTrapObjectsGroup 45 wlsxTrapESIServerName 1.3.6.1.4.1.14823.2.3.3.1.200.1.46 wlsxTrapObjectsGroup 46 wlsxTrapESIServerIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.47 wlsxTrapObjectsGroup 47 wlsxTrapLicenseDaysRemaining 1.3.6.1.4.1.14823.2.3.3.1.200.1.48 wlsxTrapObjectsGroup 48 wlsxTrapSwitchIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.49 wlsxTrapObjectsGroup 49 wlsxTrapSwitchRole 1.3.6.1.4.1.14823.2.3.3.1.200.1.
| Traps Object Object ID wlsxTrapConfidenceLevel 1.3.6.1.4.1.14823.2.3.3.1.200.1.73 wlsxTrapObjectsGroup 73 wlsxTrapMissingLicenses 1.3.6.1.4.1.14823.2.3.3.1.200.1.74 wlsxTrapObjectsGroup 74 wlsxVoiceCurrentNumCdr 1.3.6.1.4.1.14823.2.3.3.1.200.1.75 wlsxTrapObjectsGroup 75 wlsxTrapTunnelId 1.3.6.1.4.1.14823.2.3.3.1.200.1.76 wlsxTrapObjectsGroup 76 wlsxTrapTunnelStatus 1.3.6.1.4.1.14823.2.3.3.1.200.1.77 wlsxTrapObjectsGroup 77 wlsxTrapTunnelUpReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.
Object Object ID wlsxTrapAPARMChangeReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.101 wlsxTrapObjectsGroup 101 wlsxTrapAPChannelSec 1.3.6.1.4.1.14823.2.3.3.1.200.1.102 wlsxTrapObjectsGroup 102 wlsxTrapUserAttributeChangeType 1.3.6.1.4.1.14823.2.3.3.1.200.1.103 wlsxTrapObjectsGroup 103 wlsxTrapAPControllerIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.104 wlsxTrapObjectsGroup 104 wlsxTrapApMasterStatus 1.3.6.1.4.1.14823.2.3.3.1.200.1.105 wlsxTrapObjectsGroup 105 wlsxTrapCaName 1.3.6.1.4.1.14823.2.3.3.1.200.1.
Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the BSSID of the access point for which we are raising the trap. wlsxTrapEssid Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised.
wlsxTrapNodeMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of a node. wlsxTrapSourceMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the source.
wlsxTrapSnr Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the signal-to-noise ratio. wlsxTrapSignatureName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the signature name.
Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the current channel. wlsxTrapAPTxPower Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the AP transmit power. wlsxTrapMatchedMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address.
Status current Description This object is used in the traps to indicate the VLAN ID. wlsxTrapAdminStatus Syntax ArubaEnableValue (INTEGER) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the admin status of VLAN. wlsxTrapOperStatus Syntax ArubaOperStateValue Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the admin status of VLAN.
wlsxTrapTemperatureValue Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the temperature value. wlsxTrapProcessName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the process name.
Max-Access accessible-for-notify Status current Description The reason for which a station is black listed. wlsxTrapSpoofedIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object is used in a trap to identify a spoofed IP address. wlsxTrapSpoofedOldPhyAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in a trap to identify an old MAC address.
wlsxTrapDBIpAddress Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the IP address of the database. wlsxTrapDBType Syntax ArubaDBType Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the port of the user. wlsxTrapVrrpID Syntax Integer32 Max-Access accessible-for-notify Status current Description This object contains the virtual router identifier.
Max-Access accessible-for-notify Status current Description This object represents the External Services Interface (ESI) server group name. wlsxTrapESIServerName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the External Services Interface (ESI) server name.
Max-Access accessible-for-notify Status current Description This object represents the role of the controller. wlsxTrapUserIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP address of the user. wlsxTrapUserPhyAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object represents the MAC address of the user. wlsxTrapUserName Syntax DisplayString(Size(0..
wlsxTrapAPRadioNumber Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the radio number. wlsxTrapRogueInfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBGUI Rogue AP information URL. wlsxTrapInterferingAPInfoURL Syntax DisplayString(Size(0..
wlsxTrapHostIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the trap host. wlsxTrapHostPort Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the trap host port. wlsxTrapConfigurationId Syntax Integer32 Max-Access accessible-for-notify Status current Description wlsxTrapCTSURL Syntax DisplayString(Size(0..
wlsxTrapConfigurationState Syntax ArubaConfigurationState (INTEGER) Max-Access accessible-for-notify Status current Description This object represents the state of the configuration transfer. wlsxTrapUpdateFailureReason Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the reason for the update failure. wlsxTrapUpdateFailedObj Syntax DisplayString(Size(0..
wlsxTrapTableGenNumber Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the generation number of a table. Used in the MMS to keep track of the table content changes. wlsxTrapLicenseId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the license ID.
wlsxTrapTunnelId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the tunnel ID. wlsxTrapTunnelStatus Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the tunnel status. wlsxTrapTunnelUpReason Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the tunnel up reason. wlsxTrapTunnelDownReason Syntax DisplayString(Size(0.
Max-Access accessible-for-notify Status current Description This object represents the Time in String format. wlsxTrapMasterIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the master IP address. wlsxTrapLocaIIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the local IP address. wlsxTrapMasterName Syntax DisplayString(Size(0..
wlsxTrapBackupControllerIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP address of the AP's backup controller. wlsxTrapSpoofedFrameType Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Spoofed Frame Type wlsxTrapAssociationType Syntax DisplayString (SIZE(0..
Max-Access accessible-for-notify Status current Description This object represents the IP Address of a Voice client. wlsxTrapVcMacAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object represents the MAC address of a Voice client. wlsxTrapAPName Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Name of the AP.
wlsxTrapAPPrevTxPower Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate previous AP Transmit Power. wlsxTrapAPCurMode Syntax ArubaAccessPointMode (INTEGER) Max-Access accessible-for-notify Status current Description This Object represents the APs Current Mode.
Max-Access accessible-for-notify Status current Description This object represents type of the configuration change. wlsxTrapAPControllerIp Syntax IpAddress Max-Access accessible-for-notify Status current Description wlsxTrapApMasterStatus Syntax ArubaAPMasterStatus (INTEGER) Max-Access accessible-for-notify Status current Description Status of the AP as seen by the master when the status changes. wlsxTrapCaName Syntax DisplayString (SIZE(0..
wlsxTrapAPPreviousUplinkType Syntax ArubaAPUplinkType Max-Access accessible-for-notify Status current Description wlsxTrapAPPreviousUplinkActiveTime Syntax TimeTicks Max-Access accessible-for-notify Status current Description wlsxTrapAPActiveUplinkType Syntax ArubaAPUplinkType Max-Access accessible-for-notify Status current Description wlsxTrapAPUplinkChangeReason Syntax ArubaAPUplinkChangeReason Max-Access accessible-for-notify Status current Description wlsxTrapAPManagedModeCon
ai Traps Definitions Group Table 12: ai Traps Definitions Group OIDs Object Object ID wlsxNUserEntryCreated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1014 wlsxTrapDefinitionsGroup1014 wlsxNUserEntryDeleted 1.3.6.1.4.1.14823.2.3.3.1.200.2.1015 wlsxTrapDefinitionsGroup1015 wlsxNUserEntryAuthenticated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1016 wlsxTrapDefinitionsGroup1016 wlsxNUserEntryDe Authenticated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1017 wlsxTrapDefinitionsGroup1017 wlsxNUserAuthentication Failed 1.3.6.1.4.1.
| Traps Object Object ID wlsxAdhocNetworkRemoved 1.3.6.1.4.1.14823.2.3.3.1.200.2.1064 wlsxTrapDefinitionsGroup1064 wlsxStaPolicyViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1065 wlsxTrapDefinitionsGroup1065 wlsxRepeatWEPIVViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1066 wlsxTrapDefinitionsGroup1066 wlsxWeakWEPIVViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1067 wlsxTrapDefinitionsGroup1067 wlsxChannelInterference Detected 1.3.6.1.4.1.14823.2.3.3.1.200.2.
Object Object ID wlsxChannelRateAnomaly 1.3.6.1.4.1.14823.2.3.3.1.200.2.1087 wlsxTrapDefinitionsGroup1087 wlsxNodeRateAnomaly 1.3.6.1.4.1.14823.2.3.3.1.200.2.1003 wlsxTrapDefinitionsGroup1003 wlsxNodeRateAnomalyAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1088 wlsxTrapDefinitionsGroup1088 wlsxNodeRateAnomalySta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1089 wlsxTrapDefinitionsGroup1089 wlsxEAPRateAnomaly 1.3.6.1.4.1.14823.2.3.3.1.200.2.1090 wlsxTrapDefinitionsGroup1090 wlsxSignalAnomaly 1.3.6.1.4.1.14823.2.3.
| Traps Object Object ID wlsxSignAPNetstumbler 1.3.6.1.4.1.14823.2.3.3.1.200.2.1134 wlsxTrapDefinitionsGroup1134 wlsxSignStaNetstumbler 1.3.6.1.4.1.14823.2.3.3.1.200.2.1135 wlsxTrapDefinitionsGroup1135 wlsxSignAPAsleap 1.3.6.1.4.1.14823.2.3.3.1.200.2.1136 wlsxTrapDefinitionsGroup1136 wlsxSignStaAsleap 1.3.6.1.4.1.14823.2.3.3.1.200.2.1137 wlsxTrapDefinitionsGroup1137 wlsxSignAPAirjack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1138 wlsxTrapDefinitionsGroup1138 wlsxSignStaAirjack 1.3.6.1.4.1.
Object Object ID wlsxValidClientNotUsing Encryption 1.3.6.1.4.1.14823.2.3.3.1.200.2.1171 wlsxTrapDefinitionsGroup1171 wlsxAdhocUsingValidSSID 1.3.6.1.4.1.14823.2.3.3.1.200.2.1172 wlsxTrapDefinitionsGroup1172 wlsxAPSpoofingDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1173 wlsxTrapDefinitionsGroup1173 wlsxClientAssociatingOn WrongChannel 1.3.6.1.4.1.14823.2.3.3.1.200.2.1174 wlsxTrapDefinitionsGroup1174 wlsxNDisconnectStationAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.
| Traps Object Object ID wlsxNInterferingAPDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1195 wlsxTrapDefinitionsGroup1195 wlsxNSuspectRogueAP Detected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1196 wlsxTrapDefinitionsGroup1196 wlsxNSuspectRogueAP Resolved 1.3.6.1.4.1.14823.2.3.3.1.200.2.1197 wlsxTrapDefinitionsGroup1197 wlsxBlockAckAttackDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1198 wlsxTrapDefinitionsGroup1198 wlsxHotspotterAttackDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.
Object Object ID wlsxPowerSaveDosAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1220 wlsxTrapDefinitionsGroup1220 wlsxNAPMasterStatusChange 1.3.6.1.4.1.14823.2.3.3.1.200.2.1221 wlsxTrapDefinitionsGroup1221 wlsxNAdhocUsingValidSSID 1.3.6.1.4.1.14823.2.3.3.1.200.2.1222 wlsxTrapDefinitionsGroup1222 wlsxMgmtUserAuthentication Failed 1.3.6.1.4.1.14823.2.3.3.1.200.2.
wlsxNAuthServerReqTimedOut Objects wlsxTrapTime, wlsxTrapAuthServerName Status current Description This trap indicates that the authentication server request timed out. wlsxNAuthServerTimedOut Objects wlsxTrapTime, wlsxTrapAuthServerName, wlsxTrapAuthServerTimeout Status current Description This trap indicates that the authentication server timed out.
wlsxNStationAddedToBlackList Objects wlsxTrapTime, wlsxTrapNodeMac, wlsxTrapStationBlackListReason Status current Description This trap indicates that the station is black listed. wlsxNStationRemovedFromBlackList Objects wlsxTrapTime, wlsxTrapNodeMac Status current Description This trap indicates that the station is removed from the black list. the frame type.
wlsxStaImpersonation Objects { wlsxTrapTime, wlsxTrapNodeMac, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AM detected Station Impersonation.
wlsxSSIDMisconfiguration Objects {wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP detected an access point that has an SSID misconfiguration because it is using an SSID that is not valid.
wlsxStaPolicyViolation Objects {wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapNodeMac, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that Protection was enforced because a valid station's association to a non-valid access point violated Valid Station policy. For more information check http://www.wve.org/entries/show/WVE-2005-0008 and http://www.wve.org/entries/show/WVE-2005-0019.
wlsxAPInterferenceDetected Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP has detected interference for an access point.
wlsxFrameReceiveErrorRateExceeded Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapTargetAPChannel, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Receive Error Rate.
wlsxLoadbalancingEnabled Objects {wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description wlsxLoadbalancingDisabled Objects {wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM is reporting that an AP has enabled Load balancing.
wlsxSignatureMatchAP Objects {wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation} Status current Description This trap indicates that an AP detected a signature match in a frame from an access point.
access point, which exceed the configured IDS rate threshold. For more information check: http://www.wve.org/entries/show/WVE-2005-0052 http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0047 http://www.wve.
http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0047 http://www.wve.org/entries/show/WVE-2005-0048 wlsxSequenceNumberAnomalySta Objects wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AM received packets from a Node which exceeds the acceptable sequence number difference.
wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AM detected an Adhoc Network. A station is connected to an adhoc AP.
wlsxStaRepeatWEPIVViolation Objects {wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapNodeMac, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel} Status current Description This trap indicates that an AP detected that a valid station is using the same WEP initialization vector in consecutive packets.
wlsxInterferingApDetected Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel, wlsxTrapInterferingAPInfoURL } Status current Description This trap indicates that an AP detected an access point classified as Interfering. The access point is declared Interfering because it is neither authorized nor classified as Rogue.
wlsxWindowsBridgeDetected Objects { wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM has detected a station that is bridging from a wireless network to a wired network.
wlsxSignAPAirjack Objects {wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected a signature match for AirJack from an access point. For more information check http://www.wve.
Description This trap indicates that an AP detected a signature match for DeauthBroadcast from an access point. For more information check: http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.
wlsxAdhocNetworkBridgeDetectedSta Objects wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AM has detected an adhoc network that is bridging to a wired network wlsxDisconnectStationAttackAP Objects {wlsxTrapTime, wlsxTrapFrameType, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wls
Status current Description This trap indicates that a previously detected access point, classified Suspected Rogue, is either no longer present in the network or has changed its state. wlsxHtGreenfieldSupported Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected an access point that supports HT Greenfield mode.
wlsxNAdhocNetworkBridgeDetectedAP Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel} Status current Description This trap indicates that an AP detected an adhoc network that is bridging to a wired network.
Description This trap indicates that an AP detected an adhoc network using a valid/protected SSID. For more information check http://www.wve.
wlsxOmertaAttack Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapNodeMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected an Omerta attack. For more information check http://www.wve.
wlsxValidClientMisassociation Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapNodeMac, wlsxTrapAssociationType, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a misassociation between a valid client and an unsafe AP.
wlsxOverflowEAPOLKeyDetected Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapTargetAPBSSID, wlsxTrapAPChannel, wlsxTrapSnr Status current Description This trap indicates that an AP detected a key in an EAPOL Key message with a specified length greater than the length of the entire message. For more information check http://www.wve.
wlsxRTSRateAnomaly Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that the rate of RTS packets received by an AP exceeds the configured IDS threshold. wlsxNRogueAPDetected Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPChannel Status current Description This trap indicates that an unauthorized access point is connected to the wired network.
wlsxNSuspectRogueAPDetected Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPChannel, wlsxTrapConfidenceLevel Status current Description This trap indicates that an access point, classified as suspected rogue, is detected by the system. The AP is suspected to be rogue with the supplied confidence level.
wlsxNSignatureMatch Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a signature match in a frame.
Max-Access Status current Description This trap indicates that an AP detected a signature match for Null-ProbeResponse in a frame. For more information check http://www.wve.
wlsxAPDeauthContainment Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapNodeMac, wlsxTrapAPChannel, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP has attempted to contain an access point by disconnecting its client.
wlsxClientTaggedWiredContainment Objects wlsxTrapTime, wlsxTrapNodeMac, wlsxTrapTargetAPBSSID, wlsxTrapDeviceIpAddress, wlsxTrapDeviceMac, wlsxTrapVlanId, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface.
wlsxUserEntryAttributesChanged Objects wlsxTrapTime, wlsxTrapUserIpAddress, wlsxTrapUserPhyAddress, wlsxTrapAPBSSID, wlsxTrapAPName, wlsxTrapCardSlot, wlsxTrapPortNumber, wlsxTrapUserAttributeChangeType Status current Description This trap indicates that the user entry attributes have changed.
SNMP Traps SNMP Traps are MIB objects (variables) that transmit information to the SNMP Manager when an event occurs. Traps are included as varbinds (variable bindings) in the trap protocol data unit (PDU). The following traps are supported for the ifTable objects: l linkDown l linkUp These traps are sent when there is change on a specific interface such as GRE or Ethernet. linkDown Object ID 1.3.6.1.6.3.1.1.5.
