Reference Guide Dell Networking W-Series Instant 6.4.0.2-4.
Copyright © 2014 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks®, Aruba Wireless Networks®, the registered Aruba the Mobile Edge Company logo, and Aruba Mobility Management System®. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA. All other trademarks are the property of their respective owners.
Contents About this Guide ...................................................................................... 5 Document Organization.........................................................................................5 Format of Messages..............................................................................................5 Severity Levels ................................................................................................6 Message Process Generation .............................
ARM Messages ...................................................................................... 95 Error Messages....................................................................................................95 Warning Messages ..............................................................................................95 Debug Messages.................................................................................................95 4 | Dell Networking W-Series Instant 6.4.0.2-4.
About this Guide This document covers syslog messages included in Dell Networking W-Series Instant 6.4.0.2-4.1 release. In this edition, message definition, recommended action and in some cases the cause that generated he syslog message are included. Syslog messages were prioritized for definition; this edition includes definitions for approximately 70% of Instant syslog messages. For those messages yet to be defined, the phrase “No description available” appears.
= 00:12:0e:44:d4:2c These substitutions generate message text as follows: AM 00:0b:86:38:5d:b0: Interfering AP detected with SSID 06B408550367 and BSSID 00:12:0e:44:d4:2c In the following chapters, messages are defined in generic terms with variables shown to indicate where substitutions of actual data will occur. Severity Levels The severity levels defined for syslogs are outlined in Table 1, which orders the severity from most to least severe.
Syslog Server To specify a Syslog Server for sending syslog messages to the external servers, navigate to System > Show advanced options > Monitoring in the UI and update the following fields. Syslog server— Enter the IP address of the server to send system logs. Syslog level— For a global level configuration, select one of the logging levels from the standard list of syslog levels. The default value is Notice.
Related Documents In addition to this document, the Dell Networking W-Series Instant product documentation includes the following: Dell Networking W-Series Instant Access Point Installation Guides Dell Networking W-Series Instant 6.4.0.2-4.1 Quick Start Guide Dell Networking W-Series Instant 6.4.0.2-4.1 User Guide Dell Networking W-Series Instant 6.4.0.2-4.1 Command Line Reference Guide Dell Networking W-Series Instant 6.4.0.2-4.
Chapter 1 Security Messages Critical Messages Table 5 Security Critical Messages Message ID Message and Description 132002 Enabling dot1x termination for AP [mac:%m] [auth_profile:%s] before cert download. Description: Termination is being enabled before certificate is downloaded. 132014 “AP [bssid:%m] [apname:%s] Incomplete AP configuration. Check if WEP Key, WEP Transmit Key or WPA Passphrase is not configured. Description: AP’s configuration is not complete.
Error Messages Table 6 Security Error Messages Message ID Message and Description 121000 Failed to calculate the HMAC-MD5 digest Description: Controller failed to calculate the HMAC-MD5 digest for RADIUS packet due to an internal error. Recommended Action: If the problem persists, contact Dell support provider.
Table 6 Security Error Messages (Continued) Message ID Message and Description 121014 Received invalid reply digest from RADIUS server. Description: The reply digest received from the RADIUS server doesn’t match the calculated digest. Recommended Action: Check the RADIUS server is configured properly and verify shared secret configuration on the controller matches that on the RADIUS server. 121016 RADIUS server [server:%s],[fqdn:%s][ipaddr:%s] is out of sequence.
Table 6 Security Error Messages (Continued) Message ID Message and Description 121036 RADIUS: Error [errno:%d],[errstr:%s] setting client socket options. Description: Internal error occurred while setting connection options with the RADIUS server. Recommended Action: Contact Dell technical support if this problem persists. 121047 Failed to add user Port ID in the Radius Accounting Pkt [pkt:%s]. Description: This shows an internal debug message 121048 Unknown result type [resultType:%d].
Table 6 Security Error Messages (Continued) Message ID Message and Description 132016 Local Database Server not available to cache the machine auth for user [name:%s] [mac:%m] Description: Internal server is not available for caching the machine authentication for the specified User. Recommended Action: Run the aaa test-server pap internal command to verify connectivity to the local database server.
Table 6 Security Error Messages (Continued) Message ID Message and Description 132029 Station [mac:%m] [bssid:%m] sent Unsupported EAPOL Type [type:%d] Description: Station sent an unsupported EAPOL packet. Recommended Action: Ensure the station is configured properly to perform EAP authentication. If the problem persists, check for packet-corruption by capturing sniffertraces between client, AP and controller.
Table 6 Security Error Messages (Continued) Message ID Message and Description 132040 Station [mac:%m] [bssid:%m] sent Unsupported MD5 EAP type [eaptype:%d]. Description: Station sent an EAP packet that is not supported. Ensure the station is configured correctly to perform an EAP authentication method that is supported by the Dell controller. Ensure that the aaa-profile associated with the authentication request matches the authentication-method the client is sending to authenticate.
Table 6 Security Error Messages (Continued) Message ID Message and Description 132056 “[__FUNCTION__:%s]: missing server-group configuration for dot1x in aaa-profile \””[prof:%s]\”” for Station [mac:%m] [bssid:%m] Description: Specified server group for dot1x authentication in the aaa profile is not configured or has been deleted. Recommended Action: Validate that the controller configuration contains the specified server-group profile.
Table 6 Security Error Messages (Continued) Message ID Message and Description 132074 Version [stver:%d] does not match [apver:%d] in the [msg:%s] IE Elements from Station [mac:%m] [bssid:%m] [apname:%s] Description: Station sent WPA key message with invalid Version. Recommended Action: Identify the station and investigate why it is sending incorrect data.
Table 6 Security Error Messages (Continued) Message ID Message and Description 132085 Maximum number of %s Key exchanges attempted for station [name:%s] [mac:%m] [bssid:%m] [apname:%s] Description: Maximum number of key exchanges was attempted for the station 132088 “Invalid WPA [ver:%d] Key message from Station [mac:%m] [bssid:%m] [apname:%s], reason:ACK bit set Description: WPA key message with ACK bit set was received from the station.
Table 6 Security Error Messages (Continued) Message ID Message and Description 132150 Station [mac:%m] [bssid:%m] does not have 802.1x context Description: Station [mac:%m] [bssid:%m] does not have 802.1x context. 132152 802.1x termination is disabled user [mac:%m], profile [dot1x_auth_profile:%s] Description: 802.1x termination is disabled for the specified profile.
Table 6 Security Error Messages (Continued) Message ID Message and Description 132185 Failed to send the server finish for Station [mac:%m] [bssid:%m] Description: Failed to send server finish for the specified station 132188 No user-name found in the inner EAP id response from Station [mac:%m] [bssid:%m] Description: Station did not send any user name in the inner EAP id response 132195 Invalid EAP code [code:%d] in the EAP-TLV/Phase2 response from Station [mac:%m] [bssid:%m] Description: Station se
Table 6 Security Error Messages (Continued) Message ID Message and Description 132209 No unicast ciphers supported by AP [bssid:%m] [apname:%s] Description: No unicast ciphers supported by AP with WPA2 opcode 132210 “Error in cb msg processing, message to [ip:%s]:[port:%d]([app_name:%s]),[msg_code:%d], Msglen [len:%d], and Msgtype [msg_type:%d] failed with Errno [errno:%d], Errstr [errstr:%s] “ Description: Error occurred during key propagation for a client in split/bridge/d-tunnel mode for DWEP/AES/TK
Warning Messages Table 7 Security Warning Messages Message ID Message and Description 106010 “AM [bssid:%s]: Containment enabled on Suspect Rogue AP: BSSID [ap_bssid_str:%s], SSID [ssid:%s], Conf-Level [conf_level:%d] “ Description: Containment has been enabled for a suspected rogue AP because the confidence level for that AP equals or exceeds the configured value for that setting 121004 RADIUS server [name:%s]-[fqdn:%s]-[ipaddr:%s]-[sin_port:%u] timeout for client=[cbuf:%s] auth method [server:%s].
Table 8 Security Notice Messages Message ID Message and Description 106012 AM: Wireless tarpit containment: Sending Probe-Response with fake channel from AP [bssid:%m] to STA [mac:%m] on channel [channel:%d] with fake_channel [fc:%d] Description: No description available. 106013 AM: Wireless tarpit containment: Sending Probe-Response with fake BSSID for frame from AP [bssid:%m] to STA [mac:%m] on channel [channel:%d] with fake_bssid [fbssid:%m] Description: No description available.
Table 9 Security Information Messages Message ID Message and Description 121035 RADIUS type not sent: [type:%s] Description: Controller has a reference to a RADIUS type that will be dropped.
Table 9 Security Information Messages Message ID Message and Description 132131 FIPS mode is enabled. Description: FIPS mode is enabled. 132132 FIPS mode is disabled Description: FIPS mode is disabled.
Table 10 Security Debug Messages Message ID Message and Description 121044 Radius authenticate user ([user:%s]) PAP query using server [server:%s]. Description: This shows an internal debug message 121045 [func:%s]: sta_update_last_srv_grp failed. Description: This shows an internal debug message 121046 [func:%s]: last_srv_grp [last_srv_grp:%s].
Chapter 2 System Messages Emergency Messages Table 11 System Emergency Messages Message ID Message and Description 330203 MESHD process initialization failed. Cause: MESHD process initialization failed possibly because the mesh-node is not correctly provisioned. Recommended Action: Re-provision the AP. Contact Dell technical support if this problem persists. 330204 MESHD process exiting. No MESH role was specified. Cause: No MESH role was specified. Recommended Action: Re-provision the AP.
Critical Messages Table 13 Critical System Messages Message ID Message and Description 341006 [msg:%s] Description: No description available. 341275 VPN tunnel switch to [tunnel:%s], reason:[reason:%s]. Description: VPN tunnel switch. 341279 Description: Managed mode: Could not download the configuration from the server. Recommended Action: Could not download the configuration from the server.
Table 14 Error System Messages (Continued) Message ID Message and Description 304054 Client blacklist is full and caused an entry to not be added. Limit: [limit: %d]. Description: This log indicates that the client blacklist table is full and an entry that would have been added could not be added. 304055 Contact Dell tech-support.
Table 14 Error System Messages (Continued) Message ID Message and Description 311020 An internal system error has occurred at file [file:%s] function [function:%s] line [line:%d] error [error:%s]. Description: This log indicates that we encountered an internal system error. Recommended Action: Contact your support provider 311021 An internal system error has occurred at file [file:%s] function [function:%s] line [line:%d] error [error:%s].
Table 14 Error System Messages (Continued) Message ID Message and Description 326267 An internal system error has occurred at file [file:%s] function [function:%s] line [line:%d]. Description: This log indicates that we encountered an internal system error. Recommended Action: Contact your support provider 326268 An internal system error has occurred at file [file:%s] function [function:%s] line [line:%d] error [error:%s]. Description: This log indicates that we encountered an internal system error.
Table 14 Error System Messages (Continued) Message ID Message and Description 330212 System encountered an internal communication error. Error occurred when message is being sent from source application [src:%s] destination application [dst:%s] at file [file:%s] function [func:%s] line [line:%d]. Description: This log indicates that application processes in the system encountered an error sending messages to each other. This could be a transient condition and the problem might go away.
Table 14 Error System Messages (Continued) Message ID Message and Description 341041 AP basic verify image-[image:%s] fail. Description: The AP is upgrading image. 341042 AP check image-[image:%s] version for mesh fail. Description: The AP is upgrading image. 341044 AP can't open MTD device-[device:%s]. Description: The AP is setuping image. 341047 AP regulatory domains don't match Master-[id1:%d], slave-[id2:%d]. Description: The AP is upgrading image.
Table 14 Error System Messages (Continued) Message ID Message and Description 341072 AP could not find post auth role [name:%s]. Description: The AP is creating SSID. 341074 AP can't find essid-[name:%s]. Description: The AP is creating SSID. 341081 No space for acl-[name:%s]. Description: The AP is configuring ACL. 341082 ACL index-[index:%d] is invalid. Description: The AP is configuring ACL. 341083 ACL index-[index:%d] is inuse. Description: The AP is configuring ACL.
Table 14 Error System Messages (Continued) Message ID Message and Description 341114 [func:%s]: set gre name-[name:%s] fail. Description: AP is setting gre name. 341116 [func:%s]: clr gre name-[name:%s] fail. Description: AP is setting gre name. 341118 [func:%s]: create session fail for ip-[ipaddr:%s]. Description: AP is creating session. 341119 [func:%s]: SID not match for IP-[ip:%s] sid-[sid:%s]. Description: Handle papi message. 341122 [func:%s]: Malloc fail [num:%d].
Table 14 Error System Messages (Continued) Message ID Message and Description 341232 Fail to retrieve ap config from flash after [retry:%d] retries. Description: fail to retrieve ap config from flash 341235 Add [mac:%s] to subscription ap list failed. Description: Add ap to subscription ap list failed. 341270 Set priority failed, failed to find type [type:%d], sub port [port:%d], priority [priority:%d]. Description: Set priority failed. 341271 Ethernet uplink [uplink_name:%s] link down.
Table 15 Warning System Messages (Continued) Message ID Message and Description 304009 enet_move_tunnel: Tunnel [id:%d] not found. Description: No description available. 304011 stop_signal - Why was I called ... exiting. Description: No description available. 304013 tunnel_timeout: Tunnel 0x[tunnel_id:%x] not found. Description: No description available. 304014 received frame of unknown type [type:%x] (subtype [stype:%x]). Description: No description available.
Table 15 Warning System Messages (Continued) Message ID Message and Description 304033 Mesh AP support not licensed; dropping request Description: No description available. 304044 Waiting for dbstart... Description: The application is waiting for the database to be ready for access. 304048 User DB query issue in: [call: %s]. SQL command: [cmd: %s]. Description: This log indicates that there was an issue when a command was executed on the user database.
Table 15 Warning System Messages (Continued) Message ID Message and Description 326083 AM: Setting the communication path of state info to: Master switch Description: No description available. 326084 AM: Setting the communication path of state and stats info to: Local switch Description: No description available. 326085 AM: Setting collection of statistics to : [mode:%s] Description: No description available. 326096 AM: message too long [bl:%d] Description: No description available.
Table 15 Warning System Messages (Continued) Message ID Message and Description 341098 [func:%s]: Convert AP url-[url:%s], mode-[mode:%d], master-[ip:%s]. Description: The AP is converting ap. 341102 Incorrect format for message type[type:%d]:[msg_len:%d]:[recv_len:%d]:[bytes_read:%d]:[from_ip:%s]:[from_port:% d]. Description: Handle papi message. 341103 Unknown version from [ipaddr:%s] in message type-[type:%d]. Description: Handle papi message.
Table 15 Warning System Messages (Continued) Message ID Message and Description 341176 Probing too long with current uplink - [type:%s]. Description: Probe too long. 341177 Try next uplink because current uplink is down - [type:%s]. Description: Try next uplink. 341181 Setup ip for uplink - [type:%s]. Description: Setup ip for uplink interface. 341182 Setup vpn for rap conversion - [ip:%s]. Description: Setup vpn for rap conversion. 341183 Downloading rap image via vpn - url [url:%s].
Table 15 Warning System Messages (Continued) Message ID Message and Description 341245 Not allowed ap [mac:%s] for invalid subscription status [status:%s] in function[function:%s] [line:%d] . Description: Not allowed ap for invalid subscription status. 341250 VC record delta configuration, malloc error. len [len:%d] port [port:%d] flags [flags:%d] seq [seq:%d] case [case:%s] Description: VC record delta configuration, malloc error. 341252 VC send delta configurations to ap error.
Table 15 Warning System Messages (Continued) Message ID Message and Description 341289 Sending full configuration to slave ip = [ip:%s], ap config dirty = [dirty:%d] error cnt = [cnt:%d]. Description: Sending full configuration from Master to slaves APs. 341307 [func:%s]: receive config from master [ip:%s], using url [url:%d], auto save disable [flag:%d]. Description: Receive ap config from Master. 352003 [func:%s] [line:%d] [msg:%s].
Table 16 Notice System Messages (Continued) Message ID Message and Description 326013 AM: SAPCP-Parse called Description: No description available. 326014 AM: SAPCP-Parse dropped. Description: No description available. 326067 AM: IP [newbury_ip:%s] Port [newbury_port:%d] Socket [newbury_sock:%d]. Description: No description available. 326077 AM: [function:%s]: length mismatch expected [bytes_read:%d], got [msg_len:%d] Description: No description available.
Table 16 Notice System Messages (Continued) Message ID Message and Description 326271 AM: New Node Detected Node = [addr:%s] SSID = [ssid:%s] BSSID [bssid_str:%s] Description: No description available. 326272 AM: New AP Detected Channel = [channel:%d] SSID = [ssid:%s] BSSID = [bssid:%s] Description: No description available. 326273 AM: SSID Change #2: BSS [bssid:%s] Old SSID [from_ssid:%s] New SSID [ssid:%s] Channel [channel:%d]. Description: No description available.
Table 16 Notice System Messages (Continued) Message ID Message and Description 341151 Local AP-[ipaddr:%s] start download image. Description: The AP starts to download image. 341152 Receive image err [state:%s] for [ap_ip:%s]. Description: Set AP image err state. 341153 Sending upgrade write flash to [ap_ip:%s]. Description: Master send upgrade write flash to slave. 341154 Sending upgrade success to [ap_ip:%s]. Description: Send upgrade success to Master.
Information Messages Table 17 Information System Messages Message ID Message and Description 304037 VPOOL: Initialized VLAN pool for virtual AP ‘[name:%s]’ (size=[size:%d], VLANMAP=[addr:%x], Refcnt=[cnt:%d]) Description: No description available. 304038 VPOOL: VLAN Pool already initialized for VLAN-MAP [addr:%x], refcnt [cnt:%d] Description: No description available. 304042 VPOOL: Adding VLAN [vid:%d] to hash table Description: No description available.
Table 17 Information System Messages (Continued) Message ID Message and Description 326145 AM: Applying IDS Signature profile config. Group: [group_num:%d] Number of Instances: [num_sign:%d] Description: No description available. 330206 Getting out of recovery mode after [time:%d] minutes to scan. Description: Exiting recovery mode to try and find potential parents matching provisioned clusters. 330207 Received association request from an already associated child [mac:%s] - clearing old state.
Table 17 Information System Messages (Continued) Message ID Message and Description 341061 No SSID for vlan-[vlan:%d] for [ip:%x]/[mask:%x]. Description: The AP is setting acl. 341062 No space for vlan-[vlan:%d] for [ip:%x]/[mask:%x]. Description: The AP is setting acl. 341065 Activated tunnel route [desk:%x]/[mask:%x] to [dip:%x]/[ifindex:%x] usecnt-[cnt:%d]. Description: The AP is setting kernal route. 341066 Activated tunnel route [desk:%x]/[mask:%x] to [dip:%x]/[ifindex:%x] usecnt-[cnt:%d].
Table 17 Information System Messages (Continued) Message ID Message and Description 341099 [func:%s]: user-[user:%s] [type:%s] use local DB. Description: User authenticate. 341100 [func:%s]: corp subnet [ipaddr:%x]/[mask:%x] updated for vlan-[vid:%d]. Description: Corp orate configuration. 341101 Execute command-[cli:%s]. Description: Cli command. 341105 [func:%s]: [line:%d] rip-[rip:%s], eip-[eip:%s], backup-[backup:%d],lip-[lip:%s], dev_name-[name:%s]. Description: Handle papi message.
Table 17 Information System Messages (Continued) Message ID Message and Description 341145 Cert type is [type:%s], format is [format:%s]. Description: AP upload certificate for radius server. 341146 [func:%s]: result for CLI_EXECUTE_CERT_UPLOAD [result:%s]. Description: AP upload certificate for radius server. 341160 Send reboot cmd to AP [ap:%s], reason [reason:%s]. Description: Send reboot cmd. 341161 Send reboot ack to AP [ap:%s]. Description: Send reboot ack cmd.
Table 17 Information System Messages (Continued) Message ID Message and Description 341195 [func:%s]: clt del req for [mac:%s] [rehome:%d] [fapip:%s]. Description: Client Delete Request. 341196 [func:%s]: clt del notification for [mac:%s] [hapip:%s]. Description: Client Delete Notification. 341197 Send [msg:%s] to vc [ip:%s]. Description: Send register/heartbeat msg to vc. 341198 [func:%s]: receive register/heartbeat from [mac:%m], [ip:%s]. Description: Receive register/heartbeat msg from slave.
Table 17 Information System Messages (Continued) Message ID Message and Description 341231 [func:%s]: Sta ACL changed for [mac:%s] [ssid:%s] [role:%s]. Description: L3 Sta ACL changed. 341295 ale: encode [msg_type:%s] message succeed, total msg len [len:%d]. Description: encode message succeed. 341296 Statrt key generation. PAN state:[state:%s] PAN ip:[ip:%s] port:[port:%d] user:[user:%s].
Table 18 Debug System Messages (Continued) Message ID Message and Description 304036 handle_enet_message_response: IP [ip:%P] not found Description: No description available. 304051 In-memory client blacklist table cleared. Description: This log indicates that the in-memory client blacklist was cleared. 304052 Client blacklist database table cleared. Description: This log indicates that the client blacklist database table was cleared. 304053 Client blacklist repopulated from database.
Table 18 Debug System Messages (Continued) Message ID Message and Description 304074 Adding RADIO_STATS records count [num_records:%d]. Description: This log indicates the number of radio stats records added to the AMON message buffer. 304075 Sent a total of [num_records:%d] RADIO_STATS records. Description: This log indicates the total number of radio stats records sent to the management server. 304076 Adding VAP_STATS records count [num_records:%d].
Table 18 Debug System Messages (Continued) Message ID Message and Description 304088 Adding AP_SYS_STATS records count [num_records:%d]. Description: This log indicates the number of ap system stats records added to the AMON message buffer. 304089 Sent a total of [num_records:%d] AP_SYS_STATS records. Description: This log indicates the total number of ap system stats records sent to the management server. 304089 handle_enet_message_response: IP [ip:%P] PORT [port:%d] not found.
Table 18 Debug System Messages (Continued) Message ID Message and Description 326099 AM:SM: Received Spectrum Unknown Radio Message for [bssid:%s] Description: No description available. 326213 AM: MAC [mac:%s] matched with offset [match:%s] Description: No description available. 326216 AM: MAC [mac:%s] matched in [config_eth:%s] wired mac table Description: No description available. 326280 AM:SM: [msg:%s] Description: No description available.
Table 18 Debug System Messages (Continued) Message ID Message and Description 341142 [func:%s], [line:%d]: html msg is [msg:%s]. Description: AP receives HTML message from controller. 341200 Check session id fail: client_ip [ip:%s], string [sid:%s]. Description: Checking session id fail 341234 Receive stats publish from [ip:%s]. Description: Receive stats publish msg. 341236 Add [mac:%s] [status:%s] to subscription ap list.
Table 18 Debug System Messages (Continued) Message ID Message and Description 341251 VC record new delta configuration entry. cfg_id [cid:%d] current [c:%d] top [t:%d] len [len:%d] port [port:%d] flags [flags:%d] seq [seq:%d]. Description: VC record new delta configuration entry. 341253 VC send delta configurations to ap. ap [ap_ip:%s] ap_cfg_id [acid:%d] delta_cfg_id [did:%d] current_cfg_id [cid:%d] top_cfg_id [tid:%d]. Description: VC send delta configuration to ap.
Table 18 Debug System Messages (Continued) Message ID Message and Description 352002 [func:%s] [line:%d] [msg:%s]. Description: System related debugging configuration messages logged in by DPI MGR. 60 | System Messages Dell Networking W-Series Instant 6.4.0.2-4.
Chapter 3 User Messages Error Messages Table 19 User Error Messages Message ID Message and Description 524005 Invalid action :[file:%s],[func:%s],[line:%d],[action:%d] Description: This shows internal debug messages. 524006 [file:%s], [func:%s],[line:%d],cur=0x[cur:%x],end=0x[end:%x] Description: This shows internal debug messages. 524007 [file:%s], [func:%s],[line:%d], realloc size invalid, tot=:[tot:%d],certlen=:[len:%d] Description: This shows internal debug messages.
Table 19 User Error Messages 62 | User Messages Message ID Message and Description 524027 Error decoding MPPE send-key (code = [code:%d]) Description: This shows internal debug messages. 524028 Invalid MPPE send-key length:[len:%d] Description: This shows internal debug messages. 524030 Invalid Radius Code [radcode:%d] Description: This shows internal debug messages. 524043 [string:%s]: FT mic=[string1:%s] Description: This shows internal debug messages.
Table 19 User Error Messages Message ID Message and Description 524068 AES-GCM key setting is allowed only for Tunnel mode VAP's Description: This shows internal debug messages. 524127 [func:%s]():[line:%u]: MAC:[mac:%s] GSM: Failed to activate Key-cache object. Error:[error:%s] Description: This shows internal debug messages. 524128 [func:%s](): MAC:[mac:%s] GSM: Failed to publish Key-cache object. Error:[error:%s] Description: This shows internal debug messages.
Table 19 User Error Messages Message ID Message and Description 541018 [func:%s],[line:%d]: could not find client-[mac:%m]. Description: AP is looking up station. 541021 sta [mac:%m] - fail to find wlan profile for ssid-[ssid:%s]. Description: Station sync. 541028 [func:%s],[line:%d]: could not get stm ip for client-[client:%m], essid-[essid:%s]. Description: AP send portal auth acl to STM. 541046 [func:%s]: Unexpected sta-[mac:%m] lkup resp from [ip:%s].
Table 20 User Warning Messages Message ID Message and Description 501068 Source: [sa:%m] Failed AP [ip:%p]-[bssid:%m]-[name:%s] Multicast Encryption Mismatch Description: No description available. 501069 Source: [sa:%m] Failed AP [ip:%p]-[bssid:%m]-[name:%s] Unicast Encryption Mismatch Description: No description available. 501070 STA [mac:%m] not found in sta_hash_table Description: No description available. 501071 wifi_update_sta_vlan: STA [mac:%m] not found Description: No description available.
Table 20 User Warning Messages 66 | User Messages Message ID Message and Description 501096 Assoc request: [mac:%m]: Invalid Station MAC address from AP [ip:%P]-[bssid:%m][name:%s] 501097 Assoc request: [mac:%m]: Dropped AP [ip:%P]-[bssid:%m]-[name:%s] for STA DoS protection Description: No description available. 501103 Blacklist add: [mac:%m]: Reason: [reason:%s] Description: No description available.
Table 20 User Warning Messages Message ID Message and Description 501130 Delts: [mac:%m]: AP [ip:%P]-[bssid:%m]-[name:%s] Flow Not Found Description: No description available. 501131 [func:%s]:[line:%d] STA [mac:%m] not found. Description: No description available. 501135 Source: [sa:%m] Failed AP [ip:%P]-[bssid:%m]-[name:%s] WEP and TKIP encryption not valid with high throughput Description: No description available. 501141 Blacklist client: [mac:%m] removed during repopulation from db.
Table 21 User Notice Messages 68 | User Messages Message ID Message and Description 501002 “Station [sta:%m]: ESSID length error trying to associate to BSSID [bss:%m] on AP [name:%s], length [len:%d] Description: No description available. 501003 “Station [sta:%m]: Supported rates length trying to associate to BSSID [bss:%m] on AP [name:%s], length [len:%d], actual [alen:%d] Description: No description available.
Table 21 User Notice Messages Message ID Message and Description 501087 Probe request: [mac:%m]: Dropped AP [ip:%P]-[bssid:%m]-[name:%s] for STA DoS protection SSID [essid:%s] Description: No description available. 501088 Probe request: [mac:%m]: Dropped AP [ip:%P]-[bssid:%m]-[name:%s] for Rates Mismatch STA 0x[rates:%x] AP 0x[tx_rates:%x] SSID [essid:%s] Description: No description available.
Table 21 User Notice Messages 70 | User Messages Message ID Message and Description 501110 Auth failure: [mac:%m]: AP [ip:%P]-[bssid:%m]-[name:%s] Reason [resp:%d] Description: No description available. 501111 Deauth to sta: [mac:%m]: AP [ip:%P]-[bssid:%m]-[name:%s] Reason [resp:%d] Description: No description available.
Table 21 User Notice Messages Message ID Message and Description 501189 No available vlan in sta_vlan_id. Cannot take [mac:%m] association request. Description: Station manager does not have available configured vlan to accept association request. 501190 Vlan assignment algorithm not set. Cannot take [mac:%m] association request. Description: VLAN assignment algorithm is not specified in virtual-ap profile 501191 STM fails to assign a vlan to sta [mac:%m] on association request.
Table 22 User Information Messages 72 | User Messages Message ID Message and Description 541032 [func: %s]: allocate accounting session id, user-[mac:%m] id-[id:%u]. Description: learning client usrname. 541034 func: %s]: set user idle timeout, user-[mac:%m] timeout-[to:%u]. Description: Set user idle timeout. 541035 Set user agent str for [mac:%m] detail-[us:%s]. Description: Set user agent info. 541036 [func:%s]: send idle timeout, sta [mac:%m] , idle time-[time:%d].
Debug Messages Table 23 User Debug Messages Message ID Message and Description 501000 Station [mac:%m]: Clearing state Description: No description available. 501042 Station [sta:%m]: DA [da:%m] not found trying to de-authenticate to BSSID [bss:%m] on AP [name:%s] Description: No description available. 501050 “Station [sta:%m]: No bssid found for management frame type [type:%d], subtype [stype:%d] to BSSID [bss:%m]” Description: No description available.
Table 23 User Debug Messages 74 | User Messages Message ID Message and Description 501147 Update user role: [mac:%m] Update user role [role:%d] rule_index [index:%x] from master msg Description: This log indicates that update user role information from master. 501148 Receive portal auth acl: [mac:%m] ip str [ip:%s] port [port:%s] essid [essid:%s] user [usr:%s] Description: This log indicates that we received portal auth acl msg from cli0.
Table 23 User Debug Messages Message ID Message and Description 501168 Client Match: Invalid trigger from AP [ap:%m] for client [client:%m] - [reason:%s]. Description: No description is available. 501169 Client Match: Client trigger [reason:%s] for client [client:%m] from AP [name:%s] [bss:%m] to AP [d_name:%s] [d_bss:%m]. Description: No description is available. 501170 Client Match: LoadBal Band mismatch Skipping match for Client [mac:%m] Dest AP [name:%s] [bss:%m].
Table 23 User Debug Messages 76 | User Messages Message ID Message and Description 501183 Client Match: Deauth STA [mac:%m] on AP [bss:%m]. Description: No description is available. 501184 Client Match: Successful move for client [mac:%m] Source AP [s_name:%s] [s_bss:%m] Signal [s_sig:%d] to Target AP [name:%s] [bss:%m] Signal [t_sig:%d] Time diff [diff:%d] Reason [rsn:%s]. Description: No description is available.
Table 23 User Debug Messages Message ID Message and Description 501206 Client Match: Update bandsteer window for [mac:%m] Radio [rad:%m] Start time [start:%ld] End time [end:%ld] Now [now:%ld] Num steers [st:%d]. Description: No description available. 501207 Client Match: Pausing bandsteer for [mac:%m] Radio [rad:%m] Start time [start:%ld] End time [end:%ld] Now [now:%ld] Num steers [st:%d]. Description: No description available.
Table 23 User Debug Messages 78 | User Messages Message ID Message and Description 507014 Client Match: End of steer backoff for client [mac:%m] now [now:%d] last moved [moved:%d]. Description: No description is available. 507015 Client Match: Active voice client, defer client match steer [mac:%m]. Description: No description is available. 507016 Client Match: Skip [reason:%s] move, missing assoc BSS in VBR for client [mac:%m]. Description: No description is available.
Table 23 User Debug Messages Message ID Message and Description 524015 Forwarding the Radius Response to AP:[ipstr:%s],[len:%d] Description: This shows an internal user debug message 524016 radius response timeout, unauthenticating station name=:[name:%s],mac=:[mac:%s] Description: This shows an internal user debug message 524017 User name:[name:%s] ,has moved from SAP mac:[mac:%s] to SAPmac:[smac:%s] Description: This shows an internal user debug message 524018 Forwarding to the Radius Server[srvi
Table 23 User Debug Messages 80 | User Messages Message ID Message and Description 524045 FT ([func:%s]): sap=[bssid:%s] mdie=[mdie:%d] ft_cap=0x[cap:%x] ucast=0x[ucast:%x] mcast 0x[mcast:%x] Description: This shows an internal user debug message. 524047 USERNAME Description: This shows an internal user debug message. 524048 NAP_IP_ADDRESS Description: This shows an internal user debug message. 524049 CALLING_STATION_ID Description: This shows an internal user debug message.
Table 23 User Debug Messages Message ID Message and Description 524078 FT ([str:%s]): Derived ptk_name [ptk:%s] Description: This shows an internal user debug message. 524079 FT ([str:%s]): essid:[essid:%s], bssid:[bssid:%s] ukey:0[ukey:%x], mkey:[mkey:%x], psk:[psk:%s],tkip:[tkip:%s] Description: This shows an internal user debug message. 524080 FT: cannot allocate FT key info entry Description: This shows an internal user debug message.
Table 23 User Debug Messages 82 | User Messages Message ID Message and Description 524097 Generated anonce:[str:%s] Description: This shows an internal user debug message. 524098 [str:%s]: Derived gtk=[str1:%s] Description: This shows an internal user debug message. 524099 [str:%s]: Encrypted gtk=[str1:%s] Description: This shows an internal user debug message. 524100 FT([str:%s]): Calculating MIC Description: This shows an internal user debug message.
Table 23 User Debug Messages Message ID Message and Description 524116 DHCP UDR defined vlan. Got response from STM VLAN UPDATED. Description: This shows an internal user debug message. 524117 Auth done called from Key Challenge. Description: This shows an internal user debug message. 524118 [func:%s] cached entry [buf:%s]. Description: This shows an internal user debug message. 524119 [func:%s] Failed to lookup user/dot1xctx. Description: This shows an internal user debug message.
Table 23 User Debug Messages 84 | User Messages Message ID Message and Description 524141 [func:%s]():[line:%u]: MAC:[mac:%s] BSS:[bssid:%s]. Description: This shows internal debug messages. 524142 [func:%s]():[line:%u]: MAC:[mac:%s] BSS:[bssid:%s] Update:[update:%c]. Description: This shows internal debug messages. 524148 PMK aging: start-index [si:%d] end-index [ei:%d] (visited, deleted) kcache ([kv:%d], [kd:%d]) pcache ([pv:%d], [pd:%d]). Description: This shows internal debug messages.
Table 23 User Debug Messages Message ID Message and Description 541022 [func:%s]: send sta-[mac:%m] update to master-[master:%s], ssid-[ssid:%s]. Description: Station update. 541024 [func:%s],[line:%d]:get sync message for client [mac:%m], from [from_ap:%s] Description: station ip updated. 541025 [func:%s]: check client [mac:%m] [ip:%s] on AP [ap_ip:%s], timeout [timeout:%d] auth time [time:%d]. Description: Debug client reauth info.
Table 23 User Debug Messages 86 | User Messages Message ID Message and Description 541045 [func:%s]: Send accounting session, client mac-[mac:%m]. Description: No description available. 541053 [func:%s]: Send os string, client [mac:%m], os [os:%s]. Description: Station OS update. 541054 [func:%s]: Send user role, Station [mac:%m] essid [essid:%s] role [num:%d] rule_index [index:%x]. Description: Station user role update.
Chapter 4 Wireless Messages Error Messages Table 24 Wireless Error Messages Message ID Message and Description 400143 AP [name:%s]: ESSID mismatch index [ndx:%d]. expected [e1:%s] got [e2:%s] Description: An internal error has occurred. Recommended Action: Contact your support provider. 400144 AP [name:%s]: Station [sta:%m] not found while clearing association Description: An internal error has occurred. Recommended Action: Contact Dell Technical Support.
Table 25 Wireless Warning Messages Message ID Message and Description 400169 “AP - [bssid:%m], max_clients [max_clients:%d] too big Description: No description available. 400171 wifi_sap_down:unknown SAP IP [ip:%P] BSS [bssid:%m] Description: No description available. 400172 wifi_load_balance:unknown SAP IP [ip:%P] BSS [bssid:%m] Description: No description available. 400173 wifi_update_sta_vlan: AP [bssid:%m] not found Description: No description available.
Table 25 Wireless Warning Messages Message ID Message and Description 404050 AM [bssid:%s]: ARM C [channel:%d] PER [per:%d] MER [mer:%d] FRR [frr:%d] [arm_error_rate_threshold:%d]-[arm_error_rate_wait_time:%d] Description: No description available. 404052 AM [bssid:%s]: [message:%s] Description: No description available. 404061 AM [bssid:%s]: ARM Band Request - GC [g_covered_channels:%d] AC [a_covered_channels:%d] Description: No description available.
Table 25 Wireless Warning Messages Message ID Message and Description 404072 AM [bssid:%s]: ARM - too much power decreasing... cov-index [arm_ci:%d]/ [arm_nci:%d] tx-power [current_tx_power:%d] new_rra [current_channel:%d]/ [arm_max_tx_power:%d] Description: No description available. 404073 AM [bssid:%s]: ARM - too little power increasing... cov-index [arm_ci:%d]/[arm_nci:%d] tx-power [current_tx_power:%d] new_rra [current_channel:%d]/ [arm_min_tx_power:%d] Description: No description available.
Table 25 Wireless Warning Messages Message ID Message and Description 404092 AM [bssid:%s]: ARM HT Channel Band Trigger new [channel:%d]-[sec_channel:%d][arm_ii_arm_ccii:%d]/[arm_nii_arm_nccii:%d] old [ap_amc_channel:%d][ap_amc_channel_sec:%d]-[arm_ccii_arm_ii:%d]/[arm_nccii_arm_nii:%d] new_rra [min_amc_channel_pri:%d]-[min_amc_channel_sec:%d]/[new_tx_power:%d] Description: No description available.
Table 25 Wireless Warning Messages Message ID Message and Description 404404 AM [bssid:%s]: AP to APM : Too much coverage on channel [channel:%d] coverage [arm_ci:%d] tx-power [current_tx_power:%d] Description: No description available. 404405 AM [bssid:%s]: Coverage hole: APM converting to AP on channel [channel:%d] coverage [amc_coverage:%d] [tx_power:%d] Description: No description available.
Table 26 Wireless Notice Message Message ID Message and Description 404083 “AM: Tag ([MAC:%s]) detected on channel [channel:%d], battery = [battery:%d], txpower = [tx_pwr:%d] and notification is sent to [to:%s] Description: Tag chirp packet is detected and sent to rtls servers. 404400 AM:SM: Spectrum: new Wi-Fi device found = [addr:%s] SSID = [ssid:%s] BSSID [bssid_str:%s] DEVICE ID [did:%d] Description: This log indicates a new Wi-Fi device is detected by the spectrum radio.
Table 28 Wireless Debug Messages Message ID Message and Description 400131 AP [name:%s]: SAPCP Received SAPCP Probe - [band:%s]- [bssis:%m] Description: No description available. 400132 AP [name:%s]: SAPCP Sending SAPCP Probe Response Description: No description available. 400133 “AP [name:%s]: SAPCP Probe from unknown bssid [bss:%m], dropping Description: No description available. 400134 AP [name:%s]: SAPCP: Unknown sap Description: No description available.
Chapter 5 ARM Messages Error Messages Table 29 ARM Error Messages Message ID Message and Description 702002 [msg:%s]. Description: This log indicates that we encountered an internal system error. Recommended Action: Contact your support provider 700102 [msg:%s] Description: No description is available. Warning Messages Table 30 ARM Warning Messages Message ID Message and Description 700100 [msg:%s] Description: No description is available.
| ARM Messages Dell Networking W-Series Instant 6.4.0.2-4.
