Users Guide

www.dell.com
Dell Networking W-Series Instant Access Point | Quick Start Guide
Part Number 0511486-02 | December 2013
Dell Networking
W-Series
Instant Access Point
Quick Start Guide
Contacting Dell
Support
Main Website dell.com
Contact Information dell.com/contactdell
Support Website dell.com/support
Documentation Website dell.com/support/manuals
Copyright
© 2013 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks®,
Aruba Wireless Networks®, the registered Aruba the Mobile Edge Company logo, and Aruba Mobility
Management System®. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc.
All rights reserved. Specifications in this manual are subject to change without notice.
Originated in the USA. All other trademarks are the property of their respective owners.
Open Source Code
Certain Aruba products include Open Source software code developed by third parties, including software code
subject to the GNU General Public License (GPL), GNU Lesser General Public License (LGPL), or other Open
Source Licenses. Includes software from Litech Systems Design. The IF-MAP client library copyright 2011
Infoblox, Inc. All rights reserved. This product includes software developed by Lars Fenneberg, et al. The Open
Source code used can be found at this site:
http://www.arubanetworks.com/open_source
Legal Notice
The use of Aruba Networks, Inc. switching platforms and software, by all individuals or corporations, to terminate
other vendors’ VPN client devices constitutes complete acceptance of liability by that individual or corporation for
this action and indemnifies, in full, Aruba Networks, Inc. from any and all legal actions that might be taken against
it with respect to infringement of copyright on behalf of those vendors.
2. Disconnect the client from instant, the default provisioning network to which
your client system is connected.
3. Connect your client to the newly created network.
4. Log in to the Dell W-Instant UI with the administrator credentials. The instant
provisioning network is automatically deleted and will no longer be available.
Converting a W-IAP
A W-IAP can be converted to operate as a Campus AP or Remote AP managed by a
Dell Networking W-Series Mobility Controller.
To convert a W-IAP through the Dell W-Instant UI, perform the following steps:
1. Log in to the Dell W-Instant UI with the administrator credentials.
2. Click the Maintenance link at the top right corner of the Dell W-Instant main
window.
3. Click the Convert tab.
4. Based on your requirement, select an appropriate option from the Convert one or
more Access Points to drop-down menu.
5. Enter the IP address of the Dell Mobility Controller.
6. Click Convert Now. The W-IAP reboots and begins operating in the mode that you
configured.
To convert a W-IAP from a controller-managed mode to Dell W-Instant mode,
manually reset the W-IAP.
For more information on the W-IAP conversion process, see the Dell Networking
W-Series Instant Access Point User Guide.
Note: To reset a W-IAP, press and hold the reset button using a small and narrow
object such as a paperclip. Power on the W-IAP without releasing the reset button.
The power LED flashes within five seconds indicating that the reset is completed.