Users Guide

124 | Authentication Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
Figure 86 - Configuring Captive Portal when Editing a Guest Network
The appearance of a splash page can be customized as required. For information on customizing a
splash page, see "Customizing a Splash Page" on page 125.
4. Click Next and click Finish.
Configuring Internal Captive Portal with External RADIUS Server Authentication when Adding a
Guest Network
To configure internal captive portal with external RADIUS server authentication, perform the
following steps:
1. In the Network tab, click the New link. The New WLAN window opens.
2. In the WLAN Settings tab, perform the following:
a. Enter a name for the network in the Name (SSID) text box.
b. Select Guest and then click Next.
3. Use the VLAN tab, to specify how the clients on this network get their IP address and VLAN.
4. Click Next to continue.
5. In the Security tab, select Internal — Authenticated under the splash page type.
6. Select an external RADIUS server from the Authentication server drop-down list to
authenticate user credentials at run time. If there is no external RADIUS server in the drop-
down list, click New to add a RADIUS server. For information on configuring external
RADIUS server, see "External RADIUS Server" on page 112.
7. Click Next and then click Finish.