Users Guide

174 | Adaptive Radio Management Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
Figure 125 - Radio Profile
1. Navigate to RF which is at the top right corner of the Dell W-Series Instant UI.
2. Click Show advanced options to view the Radio tab.
3. Refer to the table below to configure the radio settings for bands 2.4 GHz and 5 GHz.
Parameter Description
Legacy only
Enable to run the radio in non-802.11n mode.
This is disabled by default.
802.11d / 802.11h
Enable the radio to advertise its 802.11d (Country
Information) and 802.11h (Transmit Power Control)
capabilities.
This is disabled by default.
Beacon interval
Enter the Beacon period (60ms to 500ms) for the W-
IAP in msec. This indicates how often the 802.11
beacon management frames are transmitted by the
access point.
The default value is 100 msec.
Interference immunity level
Select to increase the immunity level to improve
performance in high-interference environments.
The default immunity level is 2.
NOTE: Increasing the immunity level makes the AP
slightly “deaf¨ to its surroundings, causing the AP to
lose a small amount of range.
Table 24 - Radio Profile Configuration Parameters