Users Guide

178 | Intrusion Detection System Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
In each of these options there are several default levels that enable different sets of policies. An
administrator can customize (enable/disable) these options accordingly.
Four levels of detection can be configured in the WIP Detection page— Off, Low, Medium, and
High (as shown in Figure 127).
Figure 127 - Wireless Intrusion Protection— Detection
The following table describes the detection policies that are enabled in the Infrastructure
Detection Custom settings field.
Detection Level Detection Policy
Off Rogue Classification
Low
l Detect AP Spoofing
l Detect Windows Bridge
l IDS Signature— Deauthentication
Broadcast
l IDS Signature— Disassociation Broadcast
Medium
l Detect Adhoc networks using VALID
SSID— Valid SSID list is auto-configured
based on Instant AP configuration
l Detect Malformed Frame— Large Duration
High
l Detect AP Impersonation
l Detect Adhoc Networks
l Detect Valid SSID Misuse
l Detect Wireless Bridge
l Detect 802.11 40MHz intolerance settings
l Detect Active 802.11n Greenfield Mode
l Detect AP Flood Attack
Table 25 - Infrastructure Detection Policies