Users Guide

1. Enable wired bridging on the port. See "Configuring Wired Bridging on Ethernet 0" on
page 79.
2. Select and assign a profile from the 0/0 drop down list.
NOTE: Wired bridging must be enable on Ethernet 0 (0/0) port before you can assign a
Ethernet downlink profile.
l To assign an Ethernet downlink profile to Ethernet 1 port, select the profile from the 0/1 drop
down list.
l To assign an Ethernet downlink profile to Ethernet 2 port, select the profile from the 0/2 drop
down list.
Figure 138 - Assigning a Profile to the Ethernet Ports
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 191 | Ethernet Downlink