Users Guide

g. Enter the password used to dial the ISP in the USB password text box.
h. Enter the parameter used to switch modem from storage mode to modem mode in the
USB mode switch text box.
NOTE: The parameter details are available from the manufacturer of your modem or from
your IT administrator.
Figure 142 - Provisioning 3G/4G Uplink— Manually
NOTE: You must reboot the W-IAP after manually provisioning the W-IAP.
Provisioning 3G Uplink Automatically
To provision a 3G uplink automatically, select only the Country and ISP. The W-IAP finds the
parameters automatically.
Figure 143 - Provisioning 3G Uplink— Automatically
NOTE: In the Dell W-Series Instant UI, you can view the list of country or ISP in the country
and ISP drop-down lists. You can either use the country or ISP to configure the modem, or
configure the individual modem parameters manually. If you cannot view the list of country
or ISP from the drop-down list, then configure the modem parameters manually.
Provisioning a 3G/4G Switch Network
To provision a 3G/4G switch network, provide the driver type for the 3G modem in the USB type
text box and the driver type for 4G modem in the 4G USB type text box and click OK.
Figure 144 - 3G/4G Switch Network
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 199 | Uplink Configuration