Users Guide

212 | Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
Figure 155 - W-Instant and DHCP options for Dell PowerConnect W-AirWave— 043 Vendor
Specific Info
This creates a DHCP option 60 and 43 on a global basis. You can do the same on a per-scope
basis. The per-scope option overrides the global option.
Figure 156 - W-Instant and DHCP options for Dell PowerConnect W-AirWave— Scope
Options
Alternate Method for Defining Vendor-Specific DHCP Options
This section describes how to add vendor-specific DHCP options for DellW-Instant APs in a
network that already uses DHCP options 60 and 43 for other services. Some networks use DHCP
standard options 60 and 43 to give the DHCP clients info about certain services such as PXE to
the DHCP clients. In such an environment, it is not possible to use the standard DHCP options
60 and 43 for Dell APs.