Users Guide

220 | AirGroup Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
Component Minimum Version
Dell W-Instant 6.2.0.0-3.2.0.0
Dell PowerConnect W-ClearPass
Guest software
3.9.7
AirGroup Services plugin 0.8.7
Dell PowerConnect W-ClearPass
Policy Manager software
5.2
Table 38- DellW-Instant, Dell PowerConnect W-ClearPass Policy Manager, and
Dell PowerConnect W-ClearPass Guest Requirements
Configuring AirGroup on W-Instant
Configuring AirGroup and its service requires that you enable the AirGroup feature. W-
IAPAirGroup supports two default services i.e. AirPlay and AirPrint.
Using the Dell W-Series Instant UI
Enabling or Disabling AirGroup
As the first step in configuring AirGroup services, you must enable AirGroup in the Dell W-Series
Instant UI.
1. Go to Settings > Air Group to enable this feature.
2. Select Enable Air Group to view the AirGroup Settings.
W-Instant supports two types deployment models:
l Intra Cluster
l Inter Cluster
In the Intra Cluster model, the W-IAP does not share the mDNS database information with
the other clusters. In the Inter Cluster model, the W-IAP shares the mDNS database
information with the other clusters.
l Enable Air Group across mobility domains— Select Enable Air Group across mobility
domains to enable Inter cluster. By default, this feature is disabled. Navigate to L3 Mobility
tab of Settings to define a set of clusters.
l Enable Air Print— When enabled, the following two options are made available:
n Air Print disallowed roles— Clients with these roles will not have access to AirPrint devices.
n Air Print disallowed VLANs — No AirPrint servers will be seen on these VLANs.
l Enable Air Play— When enabled, the following two options are made available:
n Air Play disallowed roles— Clients with these roles will not have access to AirPlay devices.
n Air Play disallowed VLANs — No AirPlay servers will be seen on these VLANs.
l Clear Pass Settings— Use this section to configure the CPPM server, CoA server and enforce
Clear Pass registering.
n CPPM server 1— Indicates the Dell PowerConnect W-ClearPass Policy Manager server
information for AirGroup policy. Refer to "Configuring AirGroup-CPPM Interface in W-
Instant" on page 223 for more information.