Users Guide

232 | Monitoring Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
Graph
Name
Description Monitoring Procedure
outgoing traffic is displayed in
green. Outgoing traffic is shown
above the median line.
l Incoming traffic — Throughput for
incoming traffic is displayed in
blue. Incoming traffic is shown
below the median line.
To see an enlarged view, click the
graph.
l The enlarged view provides Last,
Minimum, Maximum, and Average
statistics for the incoming and
outgoing traffic throughput of the
Virtual Controller for the last 15
minutes.
To see the exact throughput of the
Dell W-Instant network at a particular
time, hover the cursor over the graph
line.
Instant UI. The Virtual Controller
view appears. This is the default
view.
2. Study the Throughput graph in the
Usage Trends pane. For example,
the graph shows 2.0 kbps
outgoing traffic throughput at
12:00 hours. It also shows some
incoming traffic throughput at the
same time.
Client Alerts Link
For information about the Client Alerts link, see "Clients Tab" on page 25 and "Alert Types and
Management" on page 249 sections.
IDS Link
For information about the IDS link, see "IDS" on page 39.
Network View
All Wi-Fi networks in the DellW-Instant network are listed in the Networks tab. Click the
network that you want to monitor. Network View for the selected network appears.
Similar to the Virtual Controller view, the Network view also has three tabs— Networks, Access
Points, and Clients.
The following sections in the Dell W-Series Instant UI, provide information about the selected
network:
l Info
l Usage Trends