Users Guide

234 | Monitoring Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
Figure 176 - Throughput Graph
For more information about the graphs in the network view and for monitoring procedures, see
Table 40.
Graph
Name
Description Monitoring Procedure
Clients
The Clients graph shows the number of
clients associated with the network for
the last 15 minutes.
To see an enlarged view, click the
graph.
l The enlarged view provides Last,
Minimum, Maximum, and Average
statistics for the number of clients
associated with the Virtual
Controller for the last 15 minutes.
l To see the exact number of clients
in the Dell W-Instant network at a
particular time, hover the cursor
over the graph line.
To check the number of clients
associated with the network for the
last 15 minutes,
1. Log in to the Dell W-Series
Instant UI. The Virtual Controller
view appears. This is the default
view.
2. In the Networks tab, click the
network for which you want to
check the client association. The
Network view appears.
3. Study the Clients graph in the
Usage Trends pane. For example,
the graph shows that one client is
associated with the selected
network at 12:00 hours
Throughput
The Throughput graph shows the
throughput of the selected network for
the last 15 minutes.
l Outgoing traffic — Throughput for
outgoing traffic is displayed in
green. Outgoing traffic is shown
above the median line.
l Incoming traffic — Throughput for
incoming traffic is displayed in
blue. Incoming traffic is shown
below the median line.
To see an enlarged view, click the
graph.
l The enlarged view provides Last,
Minimum, Maximum, and Average
statistics for the incoming and
outgoing traffic throughput of the
network for the last 15 minutes.
To see the exact throughput of the
selected network at a particular time,
hover the cursor over the graph line.
To check the throughput of the
selected network for the last 15
minutes,
1. Log in to the Dell W-Series
Instant UI. The Virtual Controller
view appears. This is the default
view.
2. In the Networks tab, click the
network for which you want to
check the client association. The
Network view appears.
3. Study the Throughput graph in the
Usage Trends pane. For example,
the graph shows 22.0 kbps
incoming traffic throughput for
the selected network at 12:03
hours.
Table 40 - Network View — Graphs and Monitoring Procedures