Users Guide

238 | Monitoring Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
Graph Name Description Monitoring Procedure
connected to the network.
Rogue APs: An unauthorized AP that is
plugged into the wired side of the
network.
To see the number of different types of
neighboring APs for the last 15
minutes, hover the cursor over the
respective graph lines.
2. In the Access Points tab, click
the W-IAP for which you want to
monitor the client association.
The W-IAP view appears.
3. Study the Neighboring APs graph
in the Overview section. For
example, the graph shows that
148 interfering APs are detected
by the W-IAP at 12:04 hours.
CPU
Utilization
The CPU Utilization graph displays the
utilization of CPU for the selected IAP.
To see the CPU utilization of the W-
IAP, hover the cursor over the graph
line.
To check the CPU utilization of the
W-IAP for the last 15 minutes,
1. Log in to the Dell W-Series
Instant UI. The Virtual Controller
view appears. This is the default
view.
2. In the Access Points tab, click
the W-IAP for which you want to
monitor the client association.
The W-IAP view appears.
3. Study the CPU Utilization graph in
the Overview pane. For example,
the graph shows that the CPU
utilization of the W-IAP is 30% at
12:09 hours.
Neighboring
Clients
The Neighboring Clients graph shows
the number of clients not connected to
the selected AP, but heard by it:
Valid: Any client that successfully
authenticates with a valid AP and
passes encrypted traffic is classified
as a valid client.
Interfering: A client associated to any
AP and is not valid.
To see the number of different types of
neighboring clients for the last 15
minutes, hover the cursor over the
respective graph lines.
To check the neighboring clients
detected by the W-IAP for the last 15
minutes,
1. Log in to the Dell W-Series
Instant UI. The Virtual Controller
view appears. This is the default
view.
2. In the Access Points tab, click
the W-IAP for which you want to
monitor the client association.
The W-IAP view appears.
3. Study the Neighboring Clients
graph in the Overview pane. For
example, the graph shows that 20
interfering clients were detected
by the W-IAP at 12:15 hours.
Memory free
(MB)
The memory free graph displays the
memory availability of the W-IAP in
Mega Bytes (MB).
To see the free memory of the W-IAP,
hover the cursor over the graph line.
To check the free memory of the W-
IAP for the last 15 minutes,
1. Log in to the Dell W-Series
Instant UI. The Virtual Controller
view appears. This is the default
view.
2. In the Access Points tab, click
the W-IAP for which you want to
monitor the client association.
The W-IAP view appears.
3. Study the Memory free graph in
the Overview pane. For example,
the graph shows that the free
memory of the W-IAP is 64 MB at
12:13 hours.