Users Guide

Graph Name Description Monitoring Procedure
Clients
The Clients graph shows the number of
clients associated with the selected
W-IAP for the last 15 minutes.
To see an enlarged view, click the
graph. The enlarged view provides
Last, Minimum, Maximum, and
Average statistics for the number of
clients associated with the W-IAP for
the last 15 minutes.
To see the exact number of clients
associated with the selected W-IAP at
a particular time, hover the cursor over
the graph line.
To check the number of clients
associated with the W-IAP for the
last 15 minutes,
1. Log in to the Dell W-Series
Instant UI. The Virtual Controller
view appears. This is the default
view.
2. In the Access Points tab, click
the W-IAP for which you want to
monitor the client association.
The W-IAP view appears.
3. Study the Clients graph. For
example, the graph shows that
six clients are associated with
the W-IAP at 12:11 hours.
Throughput
The Throughput graph shows the
throughput for the selected W-IAP for
the last 15 minutes.
l Outgoing traffic — Throughput for
outgoing traffic is displayed in
green. Outgoing traffic is shown
about the median line.
l Incoming traffic — Throughput for
incoming traffic is displayed in
blue. Incoming traffic is shown
below the median line.
To see an enlarged view, click the
graph.
l The enlarged view provides Last,
Minimum, Maximum, and Average
statistics for the incoming and
outgoing traffic throughput of the W-
IAP for the last 15 minutes.
To see the exact throughput of the
selected W-IAP at a particular time,
hover the cursor over the graph line.
To check the throughput of the
selected W-IAP for the last 15
minutes,
1. Log in to the Dell W-Series
Instant UI. The Virtual Controller
view appears. This is the default
view.
2. In the Access Points tab, click
the W-IAP for which you want to
monitor the throughput. The W-
IAP view appears.
3. Study the Throughput graph. For
example, the graph shows 44.03
kbps incoming traffic throughput
at 12:08 hours.
The Overview section also has two links— 2.4 GHz and 5 GHz. The following graphs are
displayed for each band:
l Utilization
Figure 184 - Utilization Graph
l 2.4 GHz Frames (fps)
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 239 | Monitoring