Users Guide

250 | Alert Types and Management Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
Type
Code
Description Details Corrective Actions
authenticate this client
because the client's MAC
address is not valid.
indicative of a misbehaving
client. Try to locate the
client device and check its
hardware and software.
100307
Client blocked due to
repeated authentication
failures
The W-IAP is temporarily
blocking the 802.1X
authentication request
from this client because
the credentials provided
have been rejected by the
RADIUS server too many
times.
Identify the client and
check its 802.1X
credentials.
100308
RADIUS server
connection failure
The W-IAP cannot
authenticate this client
using 802.1X because the
RADIUS server did not
respond to the
authentication request.
If the W-IAP is using the
internal RADIUS server,
recommend checking the
related configuration as
well as the installed
certificate and passphrase.
If the W-IAP is using an
external RADIUS server,
check if there are any
issues with the RADIUS
server and try connecting
again.
100309
RADIUS server
authentication failure
The W-IAP cannot
authenticate this client
using 802.1X because the
RADIUS server rejected
the authentication
credentials (password, etc)
provided by the client.
Ascertain the correct
authentication credentials
and log in again.
100410
Integrity check failure
in encrypted message
The W-IAP cannot receive
data from this client
because the integrity
check of the received
message (MIC) has failed.
Check the encryption
setting on the client and on
the W-IAP.
100511
DHCP request timed
out
This client did not receive
a response to its DHCP
request in time.
Check the status of the
DHCP server in the
network.