Users Guide

256 | Policy Enforcement Firewall Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
Figure 201 - Client Blacklisting
Types of Client Blacklisting
l The following types of client blacklisting can be generated in an W-Instant:
l Manual Blacklisting
l Dynamic Blacklisting
n Authentication Failure Blacklisting
n Session Firewall Based Blacklisting
Manual Blacklisting
Manual blacklisting is the simplest way to add a client to the blacklist. In manual blacklisting, the
MAC address of the client has to be known to the user. These clients would be added into a
permanent blacklist. These clients are not allowed to connect to the network unless they are
removed from the blacklist.
Adding a Client to the Manual Blacklist
To add a client to the blacklist manually using the MAC address of the client:
1. Click on the PEF link and then select Blacklisting tab.
2. Click on the New button under the Manual Blacklisting window.
3. Enter the MAC address of the client to be blacklisted in the MAC address to add text box.