Users Guide
26 | DellW-Instant User Interface Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
l OS— Operating system that runs on the client.
l Network— The network to which the client is connected.
l Access Point— W-IAP to which the client is connected.
l Channel — The client operating channel.
l Type— Wi-Fi type of the client: A, G, AN, or GN.
l Role— Role assigned to the client.
l Signal— Signal strength of the client, as detected by the AP.
l Speed (mbps)— Current PHY rate.
Figure 8 - Client Tab— Compressed View and Expanded View
Links
The following links allow you to configure the features and settings for the W-Instant network.
Each of these links are explained in the subsequent sections.
l "New Version Available" on page 27
l "Settings" on page 27
l "RF" on page 29
l "PEF" on page 30
l "WIP" on page 30
l "VPN" on page 31
l "Wired" on page 31
l "Maintenance" on page 32
l "Support" on page 32
l "Help" on page 32
l "Logout" on page 33
l "Monitoring" on page 33
l "Spectrum" on page 36
l "Alerts" on page 37
l "IDS" on page 39
l "Configuration" on page 39
l "AirGroup" on page 40
l "Language" on page 40
l "Dell PowerConnect W-AirWave Setup" on page 40
l "Pause/Resume" on page 41