Users Guide
28 | DellW-Instant User Interface Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
location reports are sent), a shared secret key, and the frequency at which packets are sent
to the server.
l Aeroscout— Enable this option to send the RFID tag information to an AeroScout RTLS.
Specify the IP address and port number of the AeroScout server, to which location reports
should be sent.
l Include unassociated stations— Enable this option to send mobile unit reports to the
Aeroscout and the Dell RTLS servers for the client stations that are not associated to any W-
IAP (unassociated stations).
Figure 10 - RTLS
l SNMP— View or specify SNMP agent settings. See "SNMP" on page 183 for more
information.
l OpenDNS— Instant supports OpenDNS business solutions which requires an OpenDNS
(www.opendns.com) account comprising a username and a password.
These credentials are used by W-Instant to access OpenDNS to provide enterprise-level
content filtering.
NOTE: For OpenDNS to work, enable Content Filtering feature while creating a new network.
Click New in the Networks tab and then select Enabled from the Content filtering drop-down
list.
NOTE: If the network firewall setup already has openDNS integration, do not configure it on
the W-IAP.
l Uplink— View or configure uplink settings. See "Uplink Configuration" on page 195 for more
information.
l Enterprise Domains— This tab indicates (displays) the DNS domain names that are valid in
the enterprise network. The domain names are used for determining the procedure for routing