Users Guide

Icon Name Description
l Green— Utilization is less than 50 percent.
l Orange— Utilization is between 50-75 percent.
l Red— Utilization is more than 75 percent.
To view the utilization graph of a W-IAP, click on the
Utilization icon against the W-IAP in the Utilization
column.
4 Noise icon
Displays the noise floor of the W-IAPs. Noise is
measured in decibels/meter. Depending on the noise
floor, the color of the lines on the Noise icon changes
from Green > Orange > Red.
l Green— Noise floor is more than 87 dBm.
l Orange— Noise floor is between 80 dBm-87 dBm.
l Red— Noise floor is less than 80 dBm.
To view the noise floor graph of a W-IAP, click on the
noise icon against the W-IAP in the Noise column.
5 Errors icon
Displays the errors for the W-IAPs. Depending on the
errors, color of the lines on the Errors icon changes
from Green > Yellow > Red.
l Green— Errors are less than 5000 frames per
second.
l Orange— Errors are between 5000-10000 frames
per second.
l Red— Errors are more than 10000 frames per
second.
To view the errors graph of a W-IAP, click on the
Errors icon against the W-IAP in the Errors column.
Usage Trends
Displays the following graphs:
n Clients— In the default homepage, the Clients graph displays the number of clients that
were associated with the Virtual Controller in the last 15 minutes. In Network or W-IAP
view, this graph displays the number of clients that were associated with the selected
network or W-IAP in the last 15 minutes.
n Throughput— In the default homepage, the Throughput graph displays the incoming
and outgoing throughput traffic for the Virtual Controller in the last 15 minutes. In the
Network or W-IAP view, this graph displays the incoming and outgoing throughput traffic
for the selected network or W-IAP in the last 15 minutes.
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 35 | DellW-Instant User Interface