Users Guide
PowerConnect W-AirWave. The Settings window appears with Admin tab selected. For
information to configure Dell PowerConnect W-AirWave, see "Configuring Dell PowerConnect
W-AirWave" on page 207.
Figure 29 - Dell PowerConnect W-AirWave Setup Link – Dell PowerConnect W-AirWave
Configuration
Pause/Resume
The Pause/Resume link is located at the bottom right corner of the Dell W-Series Instant UI. The
Dell W-Series Instant UI is automatically refreshed after every 15 seconds by default.
Click the Pause link to pause the automatic refreshing of the Dell W-Series Instant UI. When the
automatic Dell W-Series Instant UI refreshing is paused, the Pause link changes to Resume. Click
the Resume link to resume automatic refreshing.
The Pause link is useful when you want to analyze or monitor the network or a network element
and therefore do not want the user interface to refresh. Automatic refreshing allows you to get the
latest information about the network and network elements.
Views
Depending on the link or tab that is clicked, the Dell W-Series Instant UI displays information
about the Virtual Controller, Wi-Fi networks, W-IAPs, or the clients in the Info section. The
views on the Dell W-Series Instant UI are classified as follows:
l Virtual Controller view— The Virtual Controller view is the default view. This view allows you
to monitor the DellW-Instant network.
l Network view— The Network view provides information that is necessary to monitor a selected
wireless network. All Wi-Fi networks in the DellW-Instant network are listed in the Networks
tab. Click the name of the network that you want to monitor. Network view for the selected
network appears.
l W-Instant Access Point view— The W-Instant Access Point view provides information that is
necessary to monitor a selected W-IAP. All W-IAPs in the DellW-Instant network are listed in
the Access Points tab. Click the name of the W-IAP that you want to monitor. Access Point
view for that W-IAP appears.
l Client view— The Client view provides information that is necessary to monitor a selected
client. In the Client view, all the clients in the DellW-Instant network are listed in the
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 41 | DellW-Instant User Interface