Users Guide

If then,
Key management drop-down list.
Available options are:
l WPA-2 Personal
l WPA Personal
l Both (WPA-2 & WPA)
l Static WEP— If you have selected Static
WEP, do the following:
l Select appropriate WEP key size from the
WEP key size drop-down list. Available
options are 64-bit and 128-bit.
l Select appropriate Tx key from the Tx Key
drop-down list. Available options are 1, 2,
3,and 4.
l Enter an appropriate WEP key and
reconfirm.
For more information on encryption and
recommended
encryption type, see "Encryption" on page
143.
2. WPA-2 Personal—
l Select a passphrase format from the
Passphrase format drop-down list.
Available options are:
l 8-63 alphanumeric chars
l 64 hexadecimal chars
3. Enter a passphrase in the Passphrase text
box and reconfirm.
4. Select the required option from the MAC
authentication drop-down list. Available
options are Enabled and Disabled.
When Enabled, user must configure at least
one RADIUS server for authentication server.
See "MAC Authentication" on page 133 for
further details.
5. Authentication server 1— Select the
required Authentication server option from
the drop-down list. Available options are:
l New— If you select this option, an
external RADIUS server has to be
configured to authenticate the users. For
information on configuring an external
RADIUS server, see "Authentication" on
page 111.
6. Reauth interval— When set to a value
greater than zero, the Access Points
periodically reauthenticate all associated
and authenticated clients.
7. Accounting — When enabled, the Access
Points posts accounting information as
RADIUS START and RADIUS STOP
accounting records to the RADIUS server.
8. Accounting interval — When set to a
value greater than zero, the Access Point
periodically posts accounting information
as RADIUS INTERIM accounting records
to the RADIUS server.
9. Blacklisting— Select Enabled to enable
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 49 | Wireless Network