Users Guide

If then,
information on configuring an external
RADIUS server, see "Authentication" on
page 111.
4. Reauth interval— When set to a value
greater than zero, the Access Points
periodically reauthenticate all associated
and authenticated clients.
5. Blacklisting— Select Enabled to enable
blacklisting of the clients with a specific
number of authentication failures.
6. Max authentication failures— Users who
fail to authenticate the number of times
specified here are dynamically
blacklisted. The maximum value for this
entry is 10.
NOTE: Navigate to PEF > Blacklisting in the
Dell W-Series Instant UI to specify the
duration of the blacklisting on the Blacklisting
tab of the PEF window.
You want to use the default security level,
Personal
Perform the following steps:
1. Select the required key options from the
Key management drop-down list.
Available options are:
l WPA-2 Personal
l WPA Personal
l Both (WPA-2 & WPA)
2. Static WEP— If you have selected Static
WEP, then do the following:
l Select appropriate WEP key size from the
WEP key size drop-down list. Available
options are 64-bit and 128-bit.
l Select appropriate Tx key from the Tx Key
drop-down list. Available options are 1, 2,
3,and 4.
l Enter an appropriate WEP key and
reconfirm.
For more information on encryption and
recommended
encryption type, see "Encryption" on page
143.
3. WPA-2 Personal— Select a passphrase
format from the Passphrase format drop-
down list. Available options are:
l 8-63 alphanumeric chars
l 64 hexadecimal chars
4. Enter a passphrase in the Passphrase text
box and reconfirm.
5. Select the required option from the MAC
authentication drop-down list. Available
options are: Enabled and Disabled
When Enabled, user must configure at
least one RADIUS server for authentication
server. See "MAC Authentication" on
page 133 for further details.
6. Authentication server 1— Select the
required Authentication server option from
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 57 | Wireless Network