Users Guide

If then,
RADIUS server, see "Authentication" on
page 111.
3. Reauth interval— When set to a value
greater than zero, the Access Points
periodically reauthenticate all associated
and authenticated clients.
4. Accounting — When enabled, the Access
Points posts accounting information as
RADIUS START and RADIUS STOP
accounting records to the RADIUS server.
5. Accounting interval — When set to a
value greater than zero, the Access Point
periodically posts accounting information
as RADIUS INTERIM accounting records
to the RADIUS server.
6. Blacklisting— Select Enabled to enable
blacklisting of the clients with a specific
number of authentication failures.
7. Max authentication failures— Users who
fail to authenticate the number of times
specified here are dynamically
blacklisted. The maximum value for this
entry is 10.
NOTE: Navigate to PEF > Blacklisting in the
Dell W-Series Instant UI to specify the
duration of the blacklisting on the Blacklisting
tab of the PEF window.
8. InternalServer— If you select this option,
then users who are required to
authenticate with the internal RADIUS
server must be added. Click the Users link
to add the users. For information on adding
a user, see"Adding a User" on page 269.
9. Click Upload Certificate and browse to
upload a certificate file for the internal
server. See "Certificates" on page 138 for
more information.
10. Click Next to continue.
11. Use the Access Rules page to specify optional access rules for this network.
n Network-based— Set the slider to Network-based if you want the same rules to apply to all
users. The Allow any to all destinations access rule is enabled by default. This rule allows
traffic to all destinations. Instant Firewall treats packets based on the first rule matched.
For more information, see "Instant Firewall" on page 155.
To edit the default rule:
a. Select the rule and then click Edit.
b. Select appropriate options in the Edit Rule window and click OK.
To define an access rule:
a. Click New.
b. Select appropriate options in the New Rule window.
c. Click OK.
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 59 | Wireless Network