Users Guide

Figure 41 - Configuring a Splash Page — Encryption Settings
NOTE: You can customize the captive portal page using double-byte characters. Traditional
Chinese, Simplified Chinese, and Korean are a few languages that use double-byte
characters. Click on the banner, term, or policy in the Splash Page Visuals to modify the text
in the red box. These fields accept double-byte characters or a combination of English and
double-byte characters.
5. Use the Access Rules page to specify optional access rules for this network.
n Network-based— Set the slider Network-based if you want the same rules to apply to all
users. The Allow any to all destinations access rule is enabled by default. This rule allows
traffic to all destinations. W-Instant Firewall treats packets based on the first rule
matched. For more information, see "Instant Firewall" on page 155.
To edit the default rule:
a. Select the rule and then click Edit.
b. Select appropriate options in the Edit Rule window and click OK.
To define an access rule:
a. Click New.
b. Select appropriate options in the New Rule window.
c. Click OK.
n Role-based— Select Role-based if you want to specify per-user access rules. See "Creating a
New User Role" on page 145 for more information.
n Unrestricted— Select this to set no restrictions on access based on destination or type of
traffic.
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 67 | Wireless Network