Users Guide

Figure 66 - Mixed W-IAP Network Firmware Upgrade
l Image file— Select to directly upload an image file. This method is only available for single-
class W-IAPs.
n Example: DellInstant_Orion_6.2.0.0-3.2.0.0_xxxx
n Example: DellInstant_Cassiopeia_6.2.0.0-3.2.0.0_xxxx
n Example: DellInstant_Pegasus_6.2.0.0-3.2.0.0_xxxx
l Image URL— Select obtain the image file from a TFTP, FTP and HTTP URL
The following examples describe the image file format for two different classes of W-IAPs:
TFTP:
n URL for W-IAP135/134: tftp://<IP-address>/DellInstant_Cassiopeia_6.2.0.0-3.2.0.0_xxxx
n URL for W-IAP105/92/93: tftp://<IP-address>/DellInstant_Orion_6.2.0.0-3.2.0.0_xxxx
n URL for W-IAP108/109: tftp://<IP-address>/DellInstant_Pegasus_6.2.0.0-3.2.0.0_xxxx
FTP:
n ftp://<IP-address>/DellInstant_Cassiopeia_6.2.0.0-3.2.0.0_xxxx
n ftp://<IP-address>/DellInstant_Orion_6.2.0.0-3.2.0.0_xxxx
n ftp://<IP-address>/DellInstant_Pegasus_6.2.0.0-3.2.0.0_xxxx
HTTP:
n http://<IP-address>/DellInstant_Cassiopeia_6.2.0.0-3.2.0.0_xxxx
n http://<IP-address>/DellInstant_Orion_6.2.0.0-3.2.0.0_xxxx
n http://<IP-address>/DellInstant_Pegasus_6.2.0.0-3.2.0.0_xxxx
2. Click Upgrade Now to upgrade the W-IAP to the newer version.
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 89 | Managing W-IAPs