Users Guide

Figure 68 - Add Virtual Controller IP Addresses
4. Repeat Step 3 to add the IP addresses of all Virtual Controllers that form the L3 mobility
domain.
5. Click New in the Subnets section and specify the following:
a. Enter the client subnet in the IP address text box.
b. Enter the mask in the Subnet mask text box.
c. Enter the VLAN ID in the home network in the VLAN ID text box.
d. Enter the home VC IP address for this subnet in the Virtual Controller IP text box.
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 93 | Layer-3 Mobility