Users Guide

Figure 72 - Configuring a Spectrum Monitor
By default, spectrum monitoring is performed on the 5 GHz - higher band.
7. To enable spectrum monitoring for any other band for the 5 GHz radio:
a. Click the RF link at the upper right corner of the Dell W-Series Instant UI.
b. Click Show advanced options to view the Radio tab.
c. For the 5 GHz radio, specify the spectrum band you want that radio to monitor by
selecting Lower, Middle, or Higher from the Standalone spectrum band drop-down list.
d. Click OK.
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 99 | Spectrum Monitor