Reference Guide

Usage Guidelines
Use this command to configure the values to be sent in an ANQP IE to provide information about the IP protocols
and associated port numbers that are available and open for communication.
Example
The following example allows the H2QP connection capability profile to advertise the availability of ICMP and HTTP
ports.
(Instant AP)(config) # hotspot h2qp-conn-cap-profile Wan1
(Instant AP)(connection-capabilities "Wan1")# icmp
(Instant AP)(connection-capabilities "Wan1")# tcp-http
(Instant AP)(connection-capabilities "Wan1")# enable
(Instant AP)(connection-capabilities "Wan1")# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode and the H2QP connection capability profile
configuration sub-mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide hotspot h2qp-conn-cap-profile | 107