Reference Guide

hotspot hs-profile
hotspot hs-profile <profile-name>
access-network-type <type>
addtl-roam-cons-ois <addtl-roam-cons-ois>
advertisement-profile {anqp-3gpp|anqp-domain-name|anqp-ip-addr-avail|anqp-nai-realm| anqp-
nwk-auth|anqp-roam-cons|anqp-venue-name|h2qp-conn-cap|h2qp-oper-class|h2qp-oper-name|h2qp-
wan-metrics} <profile-name>
advertisement-protocol <protocol>
asra
comeback-mode
enable
gas-comeback-delay <delay>
group-frame-block
hessid <id>
internet
no
p2p-cross-connect
p2p-dev-mgmt
pame-bi
query-response-length-limit <len>
roam-cons-len-1 0|3|5
roam-cons-len-2 0|3|5
roam-cons-len-3 0|3|5
roam-cons-oi-1 <roam-cons-oi-1>
roam-cons-oi-2 <roam-cons-oi-1>
roam-cons-oi-3 <roam-cons-oi-1>
venue-group <venue-group>
venue-type <venue-type>
Description
This command configures a hotspot profile for an 802.11u public access service provider.
Syntax
Parameter Description Range Default
access-network-type <type>
Configures any of the following
access network (802.11u network
type) type:
l private — This network is
accessible for authorized users
only. For example, home
networks or enterprise
networks that require user
authentication. The
corresponding integer value for
this network type is 0.
l private-with-guest — This
network is accessible to guest
users based on guest
authentication methods. For
example, enterprise networks
that allow guest users with
captive portal authentication.
The corresponding integer
value for this network type is 1.
l chargeable-public — This
network provides access to the
private, private-
with-
guest,chargeabl
e-public, free-
public, personal-
device,
emergency-
services, test,
wildcard
chargeable-
public
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide hotspot hs-profile | 113