Reference Guide

Parameter Description Range Default
h2qp-wan-metrics}
l h2qp-conn-cap
l h2qp-oper-class
l h2qp-oper-name
l h2qp-wan-metrics
<profile-name>
Allows you to associate a specific
advertisement profile to the hotspot
profile.
— —
advertisement-protocol
<protocol>
Configures the anqp: Access
Network Query Protocol (ANQP)
advertisement protocol.
anqp —
asra
Indicates if any additional steps are
required for network access.
— —
comeback-mode
By default, ANQP information is
obtained from a GAS Request and
Response. If you enable the
comeback-mode option,
advertisement information is
obtained using a GAS Request
and Response. as well as a
Comeback-Request and
Comeback-Response. This option
is disabled by default.
— —
enable
Enables the hotspot profile.
— —
gas-comeback-delay
<delay>
Configures a GAS comeback delay
interval after which the client can
attempt to retrieve the query
response using a Comeback
Request Action frame.
100—2000
milliseconds
500
group-frame-block
Configures the Downstream Group
Addressed Forwarding (DGAF)
Disabled Mode. This feature
ensures that the W-IAP does not
forward downstream group-
addressed frames. It is disabled by
default, allowing the W-IAP to
forward downstream group-
addressed frames.
— —
hessid
Configures a homogenous ESS
identifier (HESSSID)
MAC address in
colon-separated
hexadecimal
format
—
internet
Allows the W-IAP to send an
Information Element (IE) indicating
that the network allows the Internet
access. By default, a hotspot profile
does not advertise network internet
access.
— —
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide hotspot hs-profile | 115