Reference Guide

116 | hotspot hs-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
Parameter Description Range Default
no
Removes any existing
configuration.
— —
p2p-cross-connect
Advertises support for P2P Cross
Connections.
— Disabled
p2p-dev-mgmt
Advertises support for P2P device
management.
— Disabled
pame-bi
Enables the Pre-Association
Message Exchange BSSID
Independent (PAME-BI) bit, which
is used by an AP to indicate
whether the AP indicates that the
Advertisement Server can return a
query response that is
independent of the BSSID used for
the GAS Frame exchange.
— —
query-response-length-
limit
<len>
Configures the maximum length of
the Generic Advertisement Service
(GAS query response. GAS
enables advertisement services
that allow the clients to query
multiple 802.11 networks at once,
while also allowing the client to
learn more about a network’s
802.11 infrastructure before
associating.
If a client transmits a GAS Query
using a GAS Initial Request frame,
the responding W-IAP will provide
the query response (or information
on how to receive the query
response) in a GAS Initial
Response frame.
1-127 127
roam-cons-len-1
Configures the length of the OI.
The value of the roam-cons-len-
1parameter is based upon the
number of octets of the roam-cons-
oi-1 field.
0: Zero Octets in
the OI (Null),
3: OI length is
24-bit (3 Octets),
5: OI length is
36-bit (5 Octets)
—
roam-cons-len-2
Length of the OI. The value of the
roam-cons-len-2parameter is
based upon the number of octets of
the roam-cons-oi-2 field.
0: Zero Octets in
the OI (Null),
3: OI length is
24-bit (3 Octets),
5: OI length is
36-bit (5 Octets)
—
roam-cons-len-3
Length of the OI. The value of the
roam-cons-len-3parameter is
based upon the number of octets of
the roam-cons-oi-3 field.
0: Zero Octets in
the OI (Null),
3: OI length is
24-bit (3 Octets),
5: OI length is
36-bit (5 Octets)
—