Reference Guide

Parameter Description Range Default
detect-eap-rate-anomaly
Enables Extensible Authentication
Protocol (EAP) handshake analysis to
detect an abnormal number of
authentication procedures on a channel
and generate an alarm when this
condition is detected.
— —
detect-fatajack
Enables detection of fatjack attacks. — —
detect-hotspotter-attack
Enables detection of hotspot attacks. — —
detect-ht-40mhz-
intolerance
Enables detection of 802.11n 40 MHz
intolerance setting, which controls
whether stations and APs advertising 40
MHz intolerance will be reported.
— —
detect-ht-greenfield
Enables detection of high throughput
devices advertising greenfield preamble
capability.
— —
detect-invalid-
addresscombination
Enables detection of invalid address
combinations.
— —
detect-invalid-mac-oui
Enables checking of the first three bytes
of a MAC address, known as the
organizationally unique identifier (OUI),
assigned by the IEEE to known
manufacturers. Often clients using a
spoofed MAC address do not use a valid
OUI and instead use a randomly
generated MAC address. Enabling MAC
OUI checking causes an alarm to be
triggered if an unrecognized MAC
address is in use.
— —
detect-malformed-assoc-req
Enables detection of malformed
association requests.
— —
detect-malformed-frame-
auth
Enables detection of malformed
authentication frames
— —
detect-malformed-htie
Enables detection of malformed HT
information elements.
— —
detect-malformed-large-
duration
Enables detection of unusually large
durations in frames.
— —
detect-omerta-attack
Enables detection of Omerta attack. — —
detect-overflow-eapol-key
Enables detection of overflow EAPOL
key requests.
— —
detect-overflow-ie
Enables detection of overflow
Information Elements (IE).
— —
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide ids | 125