Reference Guide

16 | aeroscout-rtls Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
aeroscout-rtls
aeroscout-rtls <IP-address> <Port> [include-unassoc-sta]
no...
Description
This command configures the Aeroscout Real-Time Asset Location Server (RTLS) settings for Instant and sends the
Radio-frequency identification (RFID) tag information to an Aeroscout RTLS server.
Syntax
Command/Parameter Description Default
<IP-address>
IP address of the Aeroscout RTLS server to which the
location reports are sent.
—
<Port>
Port number of the Aeroscout RTLS server to which the
location reports are sent..
—
include-unassoc-stas
Includes the client stations not associated to any W-IAP
when mobile unit reports are sent to the Aeroscout
RTLS server.
Disabled
no
Removes the Aeroscout RTLS configuration. —
Usage Guidelines
This command allows you to integrate Aeroscout RTLS server with Instant by specifying the IP address and port
number of the Aeroscout RTLS server. When enabled, the RFID tag information for the stations associated with a
W-IAP are sent to the AeroScout RTLS. You can also send the RFID tag information for the stations that are not
associated with any W-IAP.
Example
The following example configures the Aeroscout RTLS server:
(Instant AP)(config)# aeroscout-rtls 192.0.2.2 3030 include-unassoc-sta
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
Command was introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode