Reference Guide
162 | ntp-server Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
ntp-server
ntp-server <Name>
no…
Description
This command configures NTP server for a W-IAP.
Syntax
Parameter Description Default
ntp-server <Name>
Configures the IP address or the URL (domain name) of
the NTP server.
pool.ntp.org
no
Removes the configuration —
Usage Guidelines
The Network Time Protocol (NTP) helps obtain the precise time from a server and regulate the local time in each
network element. If NTP server is not configured in the Instant network, a W-IAP reboot may lead to variation in time
data.
Example
The following command configures an NTP server for a W-IAP:
(Instant AP)(config)# ntp-server <name>
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode