Reference Guide

restrict-corp-access
restrict-corp-access
no…
Description
This command configures restricted access to the corporate network.
Syntax
Parameter Description
no…
Removes the configuration.
Usage Guidelines
Use this command to configure restricted corporate to block unauthorized users from accessing the corporate
network. When restricted corporate access is enabled, corporate access is blocked from the uplink port of master
W-IAP, including clients connected to a slave W-IAP.
Example
The following example enables restricted access to the corporate network;
(Instant AP)(config) # restrict-corp-access
(Instant AP)(config) # end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.3.1.1-
4.0
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide restrict-corp-access | 173