Reference Guide

20 | airgroupservice Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
Parameter Description Default
disallow-vlan <VLAN-ID>
Restricts the AirGroup servers connected on the
specified VLANs from being discovered.
Disabled
enable
Enables the AirGroup service for the profile. —
id <airgroupserviceid>
Allows you to specify the AirGroup service ID
corresponding to the service that you are trying to
configure.
NOTE: The service IDs cannot be added for the pre-
configured services.
—
no…
Removes the AirGroup service configuration. —
Usage Guidelines
Use this command to enforce AirGroup service policies and define the availability of a services for an AirGroup
profile. When configuring AirGroup service for an AirGroup profile, you can also restrict specific user roles and
VLANs from availing the AirGroup services.
Example
The following example configures AirGroup services:
(Instant AP)(config)# airgroupservice AirPlay
(Instant AP)(airgroup-service)# description AirPlay Service
(Instant AP)(airgroup-service)# disallow-role guest
(Instant AP)(airgroup-service)# disallow-vlan 200
(Instant AP)(airgroup-service)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.4.0.2-
4.1
This command is modified.
Dell Networking W-Series Instant 6.3.1.1-
4.0
This command is modified.
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode and AirGroup services configuration sub-
mode.