Reference Guide

show allowed-aps

Description

This command displays the list of W-IAPs that are allowed to join the W-IAP cluster.

Usage Guidelines

Use this command to view the W-IAP whitelist.

Example

The following example shows the output of the show allowed-aps command:

Allow New APs :enable

AP Whitelist

------------

MAC Address

-----------

d8:c7:c8:cb:d4:20

d8:c7:c8:cb:d3:98

d8:c7:c8:cb:d3:b4

d8:c7:c8:cb:d3:d4

The output of this command provides the following information:

Parameter Description

Allow New APs

Indicates if the new W-IAPs are allowed to join the network.

MAC Address

Displays the MAC address of the W-IAPs that are allowed to join the network.

Command History

Version Description

Dell Networking W-

Series Instant

6.2.1.0-3.3

This command is introduced.

Command Information

W-IAP Platform Command Mode

All platforms

Privileged EXEC mode

Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show allowed-aps | 209