Reference Guide

210 | show all monitor DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show all monitor
show all monitor active-laser-beams
Description
This command shows information for Dell Networking W-Series Instant Air Monitors.
Usage Guidelines
Use this command to view the information on Dell Networking W-Series Instant Air Monitors.
Syntax
Parameter Description
active-laser-beams
Show active laser beam generators.
The output of this command shows a list of all W-IAPs that are actively
performing policy enforcement containment such as rogue containment. This
command can tell us which W-IAP is sending out deauthorization frames,
although it does not specify which W-IAP is being contained.
Example
The following example shows the output of show all monitor command.
Swarm Active Laser Beam Sources
-------------------------------
bssid channel rssi ap name lms ip master ip inactive time reported by
----- ------- ---- ------- ------ --------- ------------- -----------
Command History
Version Description
Dell Networking W-Series
Instant 6.4.0.2-4.1
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode