Reference Guide

show ap arm neighbors
The show ap arm neighbors command displays the ARM settings on the W-IAP neighbors. The following example
shows the output of the show ap arm neighbors command:
ARM Neighbors
-------------
bssid essid channel rssi tx-power PL (dB) AP Flags Last Update
----- ----- ------- ---- -------- ------- -------- ------------
6c:f3:7f:45:57:20 7SPOT 1 8 0 0 Passive
6c:f3:7f:56:7e:a0 7SPOT 1 9 0 0 Passive
6c:f3:7f:56:7e:a1 NTT-SPOT 1 12 0 0 Passive
00:24:6c:80:77:c1 NTT-SPOT 1 9 0 0 Passive
6c:f3:7f:45:57:21 NTT-SPOT 1 8 0 0 Passive
6c:f3:7f:44:91:11 NTT-SPOT 1 9 0 0 Passive
00:24:6c:2b:fd:e8 qa-mv-vap3 161 5 9 98 Passive
00:24:6c:80:4d:62 docomo 1 10 0 0 Passive
(Total updates)
---------------
Neighbor Summary:One hop 232 Two hop 0 Current Time: 2013-05-11 04:31:33
The output of this command includes the following information:
Column Description
bssid
Indicates the BSSID of the W-IAP neighbors.
essid
Indicates the ESSID of the W-IAP neighbors.
Channel
Indicates the channels assigned to the W-IAP neighbors
rssi
Indicates the Received signal strength indication (RSSI) values associated with
the ARM channels to which W-IAP neighbors are connected.
tx power
Indicates the transmission power.
PL
Indicates power loss.
AP Flags
Indicates the status of W-IAP neighbors.
Last Update
Displays details of last updates if any.
Total updates
Displays a summary if updates.
show ap arm rf-summary
The show ap arm rf-summary command shows the statistics for all channels monitored by a W-IAP. The following
example shows the output of the show ap arm rf-summary command:
Channel Summary
---------------
channel retry phy-err mac-err noise util(Qual) cov-idx(Total) intf_idx(Total)
------- ----- ------- ------- ----- ---------- -------------- ---------------
36 0 0 0 93 3/2/0/0/94 0/0(0) 97/40//0/0(137)
40 0 0 0 93 9/2/0/0/92 0/0(0) 120/82//0/0(202)
44 0 0 0 93 2/1/0/1/99 0/0(0) 161/88//0/0(249)
48 0 0 0 93 9/2/0/0/93 0/0(0) 157/59//0/0(216)
52 0 0 0 93 0/0/0/0/93 0/0(0) 15/52//0/0(67)
56 0 0 0 93 5/0/0/0/95 0/0(0) 0/18//0/0(18)
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show ap arm | 225