Reference Guide

232 | show ap bss-table Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show ap bss-table
show ap bss-table
Description
This command displays an AP’s Basic Service Set (BSS).
Usage Guidelines
The output of the show ap bss-table command shows the Dell AP BSS table for all APs. To filter this information and
view BSS table data for an individual AP or a specific port and slot number, include the ap-name, bssid, essid, ip-
addr or port keywords.
Example
The following example shows the output of show ap bss-table command:
Dell AP BSS Table
------------------
bss ess port ip phy type ch/EIRP/max-EIRP cur-cl ap name in-t(s) tot-t
--- --- ---- -- --- ---- ---------------- ------ ------- ------- -----
d8:c7:c8:3d:42:12 example1 ?/? 10.17.88.188 a-HT ap 149+/20/22.5 1 d8:c7:c8:cb:d4:20 0
18h:13m:58s
d8:c7:c8:3d:42:13 example-local-nw ?/? 10.17.88.188 a-HT ap 149+/20/22.5 0 d8:c7:c8:cb:d4:20 0
18h:13m:58s
d8:c7:c8:cb:d4:21 __wired__eth1 ?/? 10.17.88.188 b ap 0/0/0 0 d8:c7:c8:cb:d4:20 0 18h:13m:59s
d8:c7:c8:3d:42:02 example1 ?/? 10.17.88.188 g-HT ap 7/21.5/21.5 0 d8:c7:c8:cb:d4:20 0
18h:13m:58s
d8:c7:c8:3d:42:03 example-local-nw ?/? 10.17.88.188 g-HT ap 7/21.5/21.5 0 d8:c7:c8:cb:d4:20 0
18h:13m:58s
Channel followed by "*" indicates channel selected due to unsupported configured channel.
"Spectrum" followed by "^" indicates Local Spectrum Override in effect.
Num APs:5
Num Associations:1
The output of this command includes the following information:
Column Description
bss
Displays the AP Basic Service Set Identifier (BSSID). This is usually the MAC address of
the AP.
ess
Displays the AP Extended Service Set Identifier (ESSID).
port
Displays port used by the W-IAP.
ip
Displays the IP address of an AP.
phy
Displays an AP radio type. Possible values are:
l a—802.11a
l a-HT—802.11a high throughput
l g— 802.11g
l g-HT—802.11g high throughput
type
Shows whether the AP is working as an access point (AP) or air monitor (AM).