Reference Guide

show ap debug client-match
show ap debug client-match <radio>
Description
This command displays the information about the client match configuration status on an AP radio interface.
Syntax
Parameter Description
<radio>
Allows you to specify the ID number of the radio (for example, 0 or 1) for which you
want to view client match configuration status.
Usage Guidelines
Use this command to view the status of client match configuration for a specific radio interface.
Example
The following example shows the output of show ap debug client-match <radio ID> command:
Client Match Status:: RUNNING
Associated:0, Threshold:MAX
Leaving:0, Coming:0
Command History
Version Description
Dell Networking W-Series Instant 6.3.1.1-
4.0
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show ap debug client-match | 257