Reference Guide
26 | allowed-ap Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
allowed-ap
allowed-ap <MAC-address>
no…
Description
This command allows an AP to join the W-IAP cluster.
Syntax
Command/Parameter Description
allowed-ap <MAC-address>
Specifies the MACaddress of the W-IAP that is allowed to join the
cluster.
no…
Removes the specified configuration parameter.
Usage Guidelines
Use this command to allow a W-IAP to join the cluster.
Example
The following command configures an allowed W-IAP:
(Instant AP)(config)# allowed-ap 01:23:45:67:89:AB
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode