Reference Guide

Parameter Description
UAPSD
Shows the following values for Unscheduled Automatic Power Save Delivery (UAPSD) in
comma-separated format: VO, VI, BK, BE, Max SP, Q Len.
l VO: If 1, UAPSD is enabled for the VoIP access category. If UAPSD is disabled for
this access category, this value is 0.
l VI: If 1, UAPSD is enabled for the Video access category. If UAPSD is disabled for
this access category, this value is 0.
l BK: If 1, UAPSD is enabled for the Background access category. If UAPSD is
disabled for this access category, this value is 0.
l BE: If 1, UAPSD is enabled for the Best Effort access category. If UAPSD is
disabled for this access category, this value is 0.
l Max SP: The maximum service period is the number of frame sent per trigger
packet. This value is value can be 0, 2, 4 or 8.
l Q Len: The number of frames currently queued for the client, from 0 to 16 frames.
Tx_Pkts
Shows the number of packets transmitted by the client.
Rx_Pkts
Shows the number of packets received by the client.
PS_Qlen
Shows power save queue length, in bytes.
Tx_Retries
Shows the number of packets that the client had to resend due to an initial transmission
failure.
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show ap debug client-table | 263