Reference Guide

ams-backup-ip
ams-backup-ip <IP-address or domain name>
no…
Description
This command adds the IP address or domain name of the backup W-AirWave Management server.
Syntax
Parameter Description
<IP-address or domain
name>
Configures the IP address or domain name of the secondary W-AirWave
Management Server.
no…
Removes the specified configuration parameter.
Usage Guidelines
Use this command to add the IP address or domain name of the backup W-AirWave Management Server. The
backup server provides connectivity when the W-AirWave primary server is down. If the W-IAP cannot send data to
the primary server, the Virtual Controller switches to the backup server automatically.
Example
The following command configures a W-AirWave backup server.
(Instant AP)(config)# ams-backup-ip 192.0.2.1
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide ams-backup-ip | 27